• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.3
• /
• pp.497-505
• /
• 1992

본 연구에서는 최근에 개발된 직물 탄소섬유강화 복합재료의 파괴인성치를 정 량적으로 결정하고 파괴거동을 조사하고자 한다. 본 연구의 목적은 이 재료에 선형 탄성파괴역학의 적용여부를 알아보고, R곡선을 이용하여 균열의 생성점 및 불안정 파 괴점의 파괴인성치를 정확히 구하며, 주사형 전자현미경을 통해 파단면 및 균열 성장 시점을 관찰하여 파괴거동을 조사하는데 있다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.10a
• /
• pp.153-154
• /
• 2009

원자력발전소 증기발생기 전열관 보수 기술의 하나로 니켈 합금 전기 도금이 연구되고 있다. 여러 도금 공정변수 중 peak current density를 달리하여 Ni-P-Fe 전기도금층을 제조한 뒤, 열처리 온도 $325^{\circ}C$에서 10, 30일간 열처리를 한 후, 인장강도와 연신율을 측정하고, 그 파단면을 관찰하였다. 50mA/$cm^2$로 제조된 도금층은 100mA/$cm^2$로 제조된 도금층에 비해 우수한 열적안정성을 가짐을 알 수 있었다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.252-253
• /
• 2012

음극전기분해법을 이용하여 고강도 DP강과 TRIP강에 수소를 강제 주입시켜, 시험편 내 수소량을 정량적으로 분석하였고, 표면하 미소경도분포 측정과 소형펀치시험 및 파단면 관찰을 통하여 수소주입량에 따른 고강도 박강판재의 수소침투 및 수소취화거동을 평가하고자 하였다. DP강은 강도가 클수록 높은 수소량으로 조사되었고, TRIP강은 DP강에 비해 주입된 수소량이 적은 것으로 조사되었다. 또한 미소경도분포 및 소형펀치시험에서도 DP강은 TRIP강에 비해 수소취성에 민감성이 높은 것으로 평가되었다.

• Journal of Korea Foundry Society
• /
• v.43 no.6
• /
• pp.325-329
• /
• 2023

높은 주조 품질을 요구받고 있는 대부분의 다이캐스팅업체들은 양산공정을 통해 사용되고있는 용탕의 청정도를 평가하고 모니터링을 해야만 한다. 여러 가지 평가방법들을 사용할 수 있지만 현장에서는 일부 측정방법만이 다이캐스팅에 적용되고 있으며 목적에 맞게 적절하게 사용하여야 한다. 세 가지 가능한 평가 방법인 K-Mold, 기계적물성 평가 및 PoDFA(다공성 디스크 여과 장치) 를 대상으로 소개하고자 한다. 우선, 각 방법들은 서로 사용 목적 목적에 따라 선택될 수 있으며 K-Mold는 현장에서 빠르고 간단하게 적용할 수 있는 방법으로 일정한 규격화된 시편의 파면을 만들고 파단면 관찰을 통해 일정한 크기 이상의 산화물 갯수를 확인하여 용탕의 품질을 관리하는 편리한 평가방법 중 하나다. 기계적 물성 테스트는 용탕 청결도에 대한 정성적, 정량적 정보를 모두 확인할 수 있으며 샘플링 테스트에 적합한 시험법이라 할 수 있다. 또한, PoDFA는 용탕내에 개재물의 종류별 정밀분석과 양에 대한 상대적 비교 분석으로써 현장의 많은 경험을 통하여 데이터 축적하고 분석하는 방법으로 사용방법에 대한 전문교육이 필요하다.

• Journal of the Korean Society for Railway
• /
• v.15 no.3
• /
• pp.266-271
• /
• 2012

This study was carried out for the purpose of improving driving safety and comfort of the railways quickly becoming popular. To conducted gas pressure welding to ensure the strength safety of continuous welded rail and rotating bending test tensile test was conducted. The element to determine the tensile strength of gas pressure welds at experiments be attributed to more upsetting length than pressure, according to increases of upsetting length, from brittle fracture to ductile fracture was observed. Through the biopsy of the fracture surface, according to the presence of brittle fracture could be evaluated to strength safety. In addition, mechanical strength of gas pressure welding depending on changes in upsetting length was different. Rotary bending test results were obtained to the infinite life according to exhibited higher fatigue limit of 373MPa at upsetting length 25mm.

• Korean Journal of Materials Research
• /
• v.2 no.1
• /
• pp.19-26
• /
• 1992

The rate of tungsten nuclei formation from $WF_6-SiH_4$ on silicon dioxide surface was measured. The nucleation rate became faster at high deposition temperature, low carrier gas flow rate and high deposition pressure. Also the rate became faster at the downstream of the oxide surface compared to the oxide surface near the inlet. Shape and cross-sectional view of the tungsten nuclei were observed with SEM and their chemical compositions were also determined.

• Composites Research
• /
• v.26 no.5
• /
• pp.303-308
• /
• 2013

Carbon fiber (CF) reinforced polypropylene (PP) compositeis was increased to amount consumed. In this study, recycle of composites by recycle times. CF was containing 20%. Mechanical and interfacial propertis of CF/PP was evaluation for number of recycle time. Mechanical assessment of CF/PP was tension, bending, fatigue tension test and izod test method. Interfacial assessment of CF/PP was wettability test and FE-SEM of fracture surface method. Fiber and matrix was changed to recycle time. The more recycle of CF/PP, the more interfacial bonding was decreased. Because fiber and matrix was damaged to thermal damage. And then reinforced CF was shorter than original shape.

• Journal of the Korean Ceramic Society
• /
• v.39 no.7
• /
• pp.675-679
• /
• 2002

To produce a strengthened glass, single ion exchange properties such as three-point bend strength and residual stress were investigated in soda-lime-silicate substrate glass for display use. The present work showed that the maximum value of strength was 62.5${\times}$10$\sub$6/ kg/㎡ after, the two-step single ion exchange process at 470$^{\circ}C$ for 1 h and 450$^{\circ}C$ for 24 h. As the result of the fracture analysis after bending test, the residual stress on the fractured surface of the strengthened glass increased the flexibility by means of absorbing the elastic deformation energy in the glass. Also, the effects of absorbing the elastic deformation energy were analysed by curvature change, number of multiple crack branches and brittleness.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.2
• /
• pp.140-149
• /
• 1985

Fully reversed push-pull low cycle fatigue tests under strain control of trapezoid cyclic mode have been conducted in air at temperature of 550.deg. C and with frequency of 0.5 cpm on the domestic stainless steel STS 316 after solution treatment for 1 hour at 1100.deg. C. As an experimental equipment for high temperature fatigue tests, an electric servo-hydraulic fatigue machine(Instron model 1350) was used. This paper presents the effects of creep hold time and plastic strain range on push-pull high temperature low cycle fatigue life and fracture behavior. The fracture surfaces were observed by means of the scanning electron microscope. The results are as follows. (1) The fatigue life decreases with increase of the plastic strain range equal hold time and also decreases as the hold time is getting longer. (2) The frequency modified damage function can predict fatigue life by incorporating a variation of Coffin's frequency modified approach into damage function. (3) The ratios of creep damage and fatigue damage can be calculated by using he linear accumulation damage concept and the ratio of creep damage increases as the hold time is getting longer. (4) At the creep hold time of 5 minutes and the strain range of 2.0%, the fracture mode was intergranular fracture and striations were hardly observed. In this case, the intergranular cracking was originated in void type('.gamma.' type) cracking.

• Elastomers and Composites
• /
• v.45 no.1
• /
• pp.2-6
• /
• 2010

The sizing treatments of PAN-based carbon fiber surfaces were carried out in order to improve the interfacial adhesion in the carbon fibers/nylon6 composite system. The parameter to characterize the wetting performance and surface free energy of the sized fibers were determined by a contact angle method. The mechanical interfacial properties of the composites were investigated using critical stress intensity factor ($K_{IC}$). The cross-section morphologies of sized CFs/nylon6composites were observed by SEM. As the experimental results, it was observed that silane-based sizing treated carbon fibers showed higher surface free energies than other sizing treatments. In particular, the KIC of the sizing-treated carbon fibers reinforced composites showed higher values than those of untreated carbon fibers-reinforced composites. This result indicated that the increase in the surface free energy of the fibers leads to the improvement of the mechanical interfacial properties of carbon fibers/nylon6 composites.