• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2001.04a
• /
• pp.193-197
• /
• 2001

본 연구에서는 국산닥, 태국닥, 중국닥의 원료를 사용하여 펄핑, 표백, 고해, 초지, 건조의 방식을 변화시켜 총 3500 여장에 이르는 한지를 한지제조 전문가가 일정한 방법에 따라 제 조하였고 그 특정들을 조직적으로 검토하였다. 이러한 연구는 한지의 물성이 닥섬유의 처 리공정에 의해 어떻게 영향을 받는지 연구를 통계적으로 가능하게 하였다. 본 연구에서는 육재펄핑과 일광표백의 효과, 외발뜨기와 쌍발뜨기의 효과, 고해방식의 차이, 먹퍼집성에 대 해 결과들을 보이 고 있다. 육재 펄핑과 일광표백이 한지의 물성에 어떠한 영향을 미치는지 알아보기로 하였다. 현 재는 많은 한지 업자들이 육재펄핑보다는 가성소다 펄핑 (그림에서는 약품펄핑으로 표기), 일광표백보다는 차아염소산 나트륨 (그림에서는 약품표백으로 표기)을 사용하는 것이 보통 이다. 육재펄핑과 일광표백을 실시한 한지는 열단장, 인열강도, 내절도를 약품펄핑이나 약 품표백보다 높이는 효과가 있음을 알 수 있었다. 하지만 약품을 사용하는 경우 리그닌의 용출이 더 수윌하므로 백색도는 약품을 사용하는 경우가 더 유리하였다. 국산닥의 경우 육 재펄핑과 일광표백을 한 경우 먹퍼짐성이 약품사용 한지보다 크지 않음을 볼 수 있었다. 한국의 전통적인 외발뜨기 초지방식은 일본의 쌍발뜨기 방식에 비해 많은 물리적 우수성 을 보이고 있다. 외발뜨기가 쌍발뜨기에 비해 열단장, 신장율, 인열지수 및 내절도 모두가 우수함을 잘 보이고 있다. 섬유의 성질과 관련하여 전체적으로 조명해 보면, 열단장, 인열 지수는 국산닥이 가장 높으며, 내절도는 태국닥이 우수하였고, 중국닥의 경우 모두 매우 불 량함을 알 수 있다. 이것은 아마도 처리중에 과도한 표백을 실시하지 아니하였는가 하는 의구심을 들게한다. 열단장과 신장율 역시 국산닥이 우수하였다. 글씨를 쓸 때, 붓이 나가 는 정도를 마찰게수로 짐작해 보았다. 동 마찰계수와 정 마찰계수는 국산닥이 낮은 편이였 다. 마찰계수가 낮다는 사실은 한지의 표면이 더 매끄럽다고 표현될 수 있는데, 역시 국산닥 으로 제조한 한지가 붓이 나가는데 유리하지 않을까 하는 추측을 할 수 있다. 본 실험결과 는 한지 사용자들의 느낌과 상관관계를 얻어내어서 확인해야 할 것이다. 닥방망이로의 고해나 칼비터에 의한 고해나 큰 물성적으로 큰 차이를 보이지는 않고 있 었다. 단지 섬유의 차이가 고해방식의 차이보다 월등히 크다는 사실을 보이고 있다 이러한 점은 섬유장의 길이에서도 볼 수 있다. 칼비터가 섬유를 절단하기만 하고 닥방망이 고해가 섬유장의 변화를 일으키지 않는다면 틀림없이 평균 섬유장의 차이가 생길것이다.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.48 no.1
• /
• pp.25-32
• /
• 2022

In this study, basic skin characteristics data were collected by measuring skin hydration, skin melanin, skin redness, and skin torsion elasticity from Korean women in from 20's to 40's ages, and then, age and correlation analysis were conducted. This was used to create a skin index, and cluster analysis was performed to classify the groups into 4 clusters, and the skin characteristics of each cluster were confirmed. Then, two prototypes were used for two weeks to confirm the improvement effect on skin moisture, skin redness, and skin dead mass reduction, and then analyzed which product was more effective in which cluster of subjects participated in the skin characteristics test. As a result of the study, the possibility of preparing for the customized cosmetics market was confirmed by applying the skin index and cluster analysis results to product efficacy evaluation.

• Investigative Magnetic Resonance Imaging
• /
• v.14 no.1
• /
• pp.47-55
• /
• 2010

Purpose : To evaluate the geometry of carotid artery by assessing the images of contrast-enhanced MR angiography (CE-MRA) and interrelationships between the geometry of carotid artery and clinical factors. Materials and Methods : 216 consecutive patients who performed supraaortic CE-MRA with fast spoiled gradient-echo imaging were included. Their medical records were reviewed for variable information including risk factors predictive of generalized atherosclerotic disease (age, hypertension (HTN), diabetes mellitus, hyperlipidema, and smoking), sex, body weight, height, and body mass index (BMI). We reviewed the CE-MRA with carotid origin (3 types), carotid artery tortuosity, angle of internal carotid artery bifurcation, the type of aortic arch branching, and the presence of the coiling of carotid artery. Results : Multinomial logistic regression analysis showed that significantly contributed clinical backgrounds for carotid origin were the age and the BMI. With an increase of age at 1, the probability that the type of carotid origin become from type 1 to type 2 was 0.9 times (p=0.004) in right carotid artery (RCA), 0.9 times (p = 0.031) in left carotid artery (LCA), 0.9 times that are likely to be type3 from type 2 (p<0.001) in RCA and 0.9 times in LCA (p=0.009). Increase in BMI at 1 increased odds of becoming type 2 as 1.1 times (p = 0.067) in RCA, 1.1 times (p=0.009) in LCA and increased chance of becoming type 3 as 1.2 times (p = 0.001) in RCA, 1.2 times (p=0.003) in LCA. Mean value of right and left carotid tortuosity were $240.9{\pm}69.0^{\circ}$and $154.4{\pm}55.0^{\circ}$, respectively. Conclusion : The BMI, age, sex and presence of HTN affects the geometry of carotid arteries, the site of origin and tortuosity of carotid artery specifically.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.17 no.2
• /
• pp.171-181
• /
• 2004

This paper developed the theoretical method to predict structural performances and weight reduction rates of a carbody when its materials should be substituted. For the material substitution design of the carbody, the bending, axial and twisting deformations are evaluated under the constant stiffness and strength conditions. For the design of the primary structures such as the center beams, the cross beams and the cantrails, the bending and axial deformations are investigated under the condition of the constant bending stiffness, the constant bending or buckling strength by considering both the material properties and the cross sectional shapes. The developed indices to measure the weight reduction by the material substitution give good informations on the weak and strong points of a carbody design.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.79-85
• /
• 2002

본 연구는 대추 수확기개발을 위한 기초연구로써 대추의 열매, 잎, 잎줄기의 물리적 역학적 특성을 조사.분석하였으며, 그 결과를 요약하면 다음과 같다. .대추 열매의 평균 장경, 경, 부피, 무게, 탈과력은 각각 32.02 mm, 23.9 mm, 10.0$\times$$10^{-6}$m$^3$, 5.2~12.8g, 5.7 N으로 나타났다. .대추무게가 증가하면 탈과력은 증가하고, F/W는 감소하는 경향을 나타났다. .대추나무가지의 평균 탄성계수는 7.01$\times$$10^{8}$ N/m$^2$였고, 가지의 굵기가 증가하면서 감소하였다. .대추나무가지의 평균 비틀림 강성은 5.2$\times$$10^{7}$ N/m$^2$으로 나타났으며, 가지의 굵기가 증가하면서 음의 지수 함수적으로 감소하는 경향을 나타냈으나, 데이터가 일정한 범위에 산재해 있어 가지의 굵기에 따른 강성계수변화 특성은 일정한 경향으로는 나타나지 않았다. .대추 잎줄기의 평균 무게, 잎수, 길이가 각각 0.7g, 6.6개, 12.2 cm로 나타났다. .대추 잎의 평균 잎면적, 무게, 탈리력은 각각 13 $cm^2$, 0.2g, 4.4 N으로 나타났다. .종말속도는 대추 열매의 무게가 증가하면서 증가하고, 대추잎의 무게, 면적이 증가할수록 감소하는 경향을 나타냈으며, 잎줄기의 종말속도는 잎줄기 무게 혹은 잎줄기에 매달린 잎의 수와는 거의 영향을 받지 않는 것으로 나타났으며, 잎줄기의 길이가 증가할수록 약간씩 증가하는 경향을 나타냈다.

• Development and Reproduction
• /
• v.15 no.4
• /
• pp.301-308
• /
• 2011

The tolerance evaluation for abalone Haliotis discus hannai embryos was performed using different concentrations of cryoprotective agents (CPAs): dimethyl sulfoxide, ethylene glycol and propylene glycol added to 0.2 M sucrose, respectively. 4-cell, trochophore and veliger were exposed in each CPA with different concentration for 10, 20 and 30 minutes of immersion time. Developmental rates were increased with decreased concentration of every CPA and decreased immersion time, and differed from types of CPA. Developmental rates of veliger in all the CPAs were higher than those of 4-cell and trochophore. The developmental rates and larval activity indices in ethylene glycol were comparatively higher than those in other CPAs and the effective CPA and its concentration for the cryopreservation of the abalone embryos was suggested as 2.0 M ethylene glycol with equilibration time of 30 minutes.

• Composites Research
• /
• v.14 no.2
• /
• pp.13-21
• /
• 2001

Substituting composite structures for conventional metallic structures has many advantages because of higher specific stiffness and specific strength of composite materials. In this work, one-piece driveshafts composed of carbon/epoxy and glass/epoxy composites were designed and manufactured for a rear wheel drive automobile satisfying three design specifications, such as static torque transmission capability, torsional buckling and the fundamental natural bending frequency. Single lap adhesive joint was used to join the composite shaft and the aluminum yoke. The torque transmission capability of the adhesively bonded composite shaft was calculated with respect to bonding length and yoke thickness by finite element analysis and compared with the experimental result. Torque transmission capability was based on the Tsai-Wu failure index fur composite shaft and the failure model which incorporated the nonlinear mechanical behavior of aluminum yoke and epoxy adhesive. From the experiments and the finite element analyses, it was found that the static torque transmission capability of the composite driveshaft was highest at the critical yoke thickness, and saturated beyond the critical length. Also, it was found that the one-piece composite driveshaft had 40% weight saving effect compared with a conventional two-piece steel driveshaft.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.24 no.1
• /
• pp.70-78
• /
• 1991

Both long period of summer drought and unusual high water temperature in 1988 caused the harmfull effect to the aquacultural organisms in south coast of Korea. One of those was the mass mortality of arkshell seedlings in Jinhae Bay. The purpose of this study was to verify the effects of environmental factors on arkshell seedlings by investigating not only water quality and food organisms in culturing grounds, but also meteorological conditions. Water temperature in November was higher at $2.0^{\circ}C$ than mean water temperature and the concentration of total inorganic nitrogen and N/P ratio were $0.38{\mu}g-at/l,$ 0.98, respectively which indicated the exhaustion of nutrients, especially nitrogen in the study area. In analysis of phytoplankton population structure, species diversity index(H) , equitability-index(e), species richness $index(d_1)$ were low, but dominance $index({\delta}_2)$ was high at the value of 98.4 and dominant species was Nitzschia pungens. In conclusion, it seems that mass .mortality of arkshell seedlings in November was resulted from the metabolism disorder with poor food organism under the unstable marine environment.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.2
• /
• pp.51-59
• /
• 1993

This paper develops practical and realistic reliability models and methods for the evaluation of system-reliability and system reliability-based rating of various types of box-girder bridge superstructures. The strength limit state model for box-girder bridges suggested in the paper are based on not only the basic flexural strength but also the strength interaction equations which simultaneously take into account flexure, shear and torsion. And the system reliability problem of box-girder superstructure is formulated as parallel-series models obtained from the FMA(Failure Mode Approach) based on major failure mechanisms or critical failure states of each girder. In the paper, an improved IST(Importance Sampling Technique) simulation algorithm is used for the system reliability analysis of the proposed models. This paper proposes a practical but rational approach for the evaluation of capacity rating in terms of the equivalent system-capacity rating corresponding to the estimated system-reliability index which is derived based on the concept of the equivalent FOSM(First Order Second Moment) form of system reliability index. The results of the reliability evaluation and rating of existing bridges indicate that the reserved reliability and capacity rating at system level are significantly different from those of element reliability or conventional methods especially in the case of highly redundant box-girder bridges.

• Journal of Korean Society of Steel Construction
• /
• v.21 no.6
• /
• pp.597-608
• /
• 2009

In this paper, large-deformation elasto-plastic analysis of space frames that considersjoint connection properties is presented. This method is based on the large-deformation formula with finite rotation, which was developed initially for elastic systems, and is extended herein to include the elasto-plastic effect and the member joint connection properties of semi-rigid what?. The analytical method was derived from the Eulerian concept, which takes into consideration the effects of large joint translations and rotations. The localmember force-deformation relationships were obtained from the beam-column approach, and the change caused by the axial strain in the member chord lengths and flexural bowing were taken into account. The effect of the axial force of the member on bending and torsional stiffness, and on the plastic moment capacity, is included in the analysis. The material is assumed to be ideally elasto-plastic, and yielding is considered concentrated at the member ends in the form of plastic hinges. The semi-rigid properties of the member joint connection are considered based on the power or linear model. The arc length method is usedto trace the post-buckling range of the elastic and elasto-plastic problems with the semi-rigid connection. A sample non-linear buckling analysis was carried out with the proposed space frame formulations to demonstrate the potential of the developed method in terms of its accuracy and efficiency.