• 한국유체기계학회 논문집
• /
• 제17권4호
• /
• pp.19-29
• /
• 2014

In addition to the development of micro hydro turbine, the challenge in micro hydro turbine design as sustainable hydro devices is focused on the optimization of turbine runner blade which have decisive effect on the turbine performance to reach higher efficiency. A multi-objective optimization method to optimize the performance of runner blade of propeller turbine for micro turbine has been studied. For the initial design of planar blade cascade, singularity distribution method and the combination of the Bezier curve parametric technology is used. A non-dominated sorting genetic algorithm II(NSGA II) is developed based on the multi-objective optimization design method. The comparision with model test show that the blade charachteristics is optimized by NSGA-II has a good efficiency and load distribution. From model test and scale up calculation, the maximum prototype efficiency of the runner blade reaches as high as 90.87%.

• 대한조선학회지
• /
• 제18권3호
• /
• pp.1-9
• /
• 1981

In this paper, it is demonstrated that, with the distribution of lowest order concentrated(discrete) singularities of delta function nature, the solution to the linear free surface problem can be obtained with a remarkable degree of accuracy. The linear boundary value problem is formulated subject to boundary conditions for the determination of strengths of singularities; the simple sources above(not on) the free surface and the vortices on the body surface. Three sample calculation were performed` the flow about a submerged vortex of known strength, the flow past a submerged circular cylinder, and the flow around a hydrofoil section. The convergence of the numerical procedure is achieved with a relatively small number of elements. The final results are compared with those of the published works, and are considered very satisfactory.

• 한국해양공학회지
• /
• 제8권2호
• /
• pp.124-130
• /
• 1994

This paper compared with the hydrodynamic interference acting on the semi-submersible element model with 1-lowerhull and 2-columns. In this case, calculation are applying the strip method and 3-dimensional source distribution method. As the wave frequency and the distance between increase, the influence effects of parts upon each other decrease and approach the results calculated by using the strip method. Thus, it can be prepared for the investigation of new practical method of investigation of new practical method of hydrodynamic forces acting on huge structures.

• 대한조선학회논문집
• /
• 제35권2호
• /
• pp.8-19
• /
• 1998

본 논문에서는 자유수면하에서 이동하는 2차원 수중익 주위의 비선형 유동문제를 포텐셜 이론을 바탕으로 특이점 분포법을 도입하여 해석한 결과이다. Hess & Smith[12]의 방법에 따라 수중익의 표면에 소오스와 보텍스패널을 분포하고, 비선형해를 구하기 위해서 자유수면 위 일정 거리에 랜킨소오스패널(Rankine Source Panel)을 분포하는 수치기법(Raised Panel Method)을 사용하였다. Neumann-Kelvin 선형해로부터 반복계산법을 통해 비선형 자유수면 조건을 엄밀히 만족하는 비선형해를 구하였다. 수치계산결과에서 비선형해가 Duncan[11]의 실험결과(NACA0012, 입사각$(\alpha)= 5^{\circ}$)와 비교적 잘 일치함을 보였으며 수치계산결과의 타당성을 검증할 수 있었다. 잠수깊이가 얕은 경우와 고속 영역에서도 수렴된 해를 구할 수 있었으며, 고속으로 갈수록 비선형해와 선형해의 차이는 미미함을 볼 수 있었다. 수중익의 두께 및 캠버(camber)등 기본적인 단면변화와 속도변화에 대한 수중익의 유체역학적 특징을 살펴보았다.

• 한국해안·해양공학회논문집
• /
• 제24권1호
• /
• pp.36-47
• /
• 2012

본 연구에서는 단주기파랑의 저감을 위해 기설의 직선배치된 방파제와 직사각형항만의 개구부에 기존의 연구에서 제안된 공진장치를 부착하여 3차원수리모형실험과 수치해석으로부터 공진장치의 제어능을 검토하였다. 수치 해석에 있어서는 연직선 Green함수에 기초한 특이점분포법의 선형해석법과 3D-NIT모델에 의한 강비선형해석법을 적용하여 수리실험결과와 수치해석결과의 비교 분석으로부터 본 수치해석법의 타당성을 검증하였다. 또한, 공진장치가 부착되지 않은 경우와 대비 검토하여 단주기파랑의 제어에 대한 공진장치의 제어능을 다각도로 검토하여 그의 유효성을 충분히 확인할 수 있었다.

• 한국해양공학회지
• /
• 제8권1호
• /
• pp.23-32
• /
• 1994

A numerical procedure is described for simultaneously predicting the motion and structural responses of tension leg platforms (TLPs) in multi-directional irregular waves. The developed numerical approach is based on a combination of a three dimensional source distribution method, the finite element method for structurally treating the space frame elements and a spectral analysis technique of directional waves. The spectral description for the linear responses of a structure in the frequency domain is sufficient to completely define the responses. This is because both the wave inputs and the responses are stationary Gaussian ran dom process of which the statistical properties in the amplitude domain are well known. The hydrodynamic interactions among TLP members, such as columns and pontoons, are included in the motion and structural analysis. The effect of wave directionality has been pointed out on the first order motion, tether forces and structural responses of a TLP in multi-directional irregular waves.

• 한국해양공학회지
• /
• 제10권1호
• /
• pp.25-35
• /
• 1996

A numerical procedure is described for predicting the motion and structural responses of tension leg platforms(TLPs) in waves. The developed numerical approach is based on a combination of a three dimensional source distribution method and the dynamic response analysis method, in which the superstructure of TLPs is assumed to be flexible instead of rigid. Restoring forces by hydrostatic pressure on the submerged surface of a TLP have been accurately calculated by excluding the assumption of the slender body theory. The hydrodynamic interactions among TLP members, such as columns and pontoons, and the structural damping are included in the motion and structural analysis. The equations of motion of a whole structure are formulated using element-fixed coordinate systems which have the orgin at the nodes of the each hull element and move parallel to a space-fixed coordinate system. Numerical results are compared with the experimental and numerical ones, which are obtained in the literature, concerning the motion and structural responses of a TLP in waves. The results of comparison confirmed the validity of the proposed approach.

• 한국해양공학회지
• /
• 제24권2호
• /
• pp.34-40
• /
• 2010

When a large ship is advancing in waves, it undergoes hydroelastic response, which affects the structural stability and the fatigue destruction of the ship. Therefore, to predict an accurate hydroelastic response, it is necessary to conduct a thorough analysis of hydroelastic response, including fluid-structure interactions. In this research, the ship is divided into many hull elements, to calculate the fluid forces and wave exciting forces on each element. Using the three-dimensional source distribution method, the calculated fluid forces and wave exciting forces are assigned to nodes of the hull elements. The neighbor nodes are connected with elastic beam elements. We analyzed hydroelastic responses, using the finite elements method.

• 한국해양공학회지
• /
• 제20권4호
• /
• pp.83-90
• /
• 2006

Recently, as the technology of utilization for the ocean space is being advanced, floating structures are asked for being mare and mare huge-scale. A very large floating structure(VLFS) is considered as a flexible structure, because of a quite large length-to-breadth ratio and its geometrical flexibility. The main object of this study is to develop an accurate and convenient method on the hydroelastic response analysis of very large offshore structures on the real sea states. The numerical approach for the hydorelastic responses is based on the combination of the three dimensional source distribution methods, the dynamic response analysis method and the spectral analysis method. A model is considered as many rigid bodies connected elastic beam elements. The calculated results shaw good agreement with the experimental and calculated ones by Ohta.

• 대한조선학회논문집
• /
• 제29권4호
• /
• pp.66-74
• /
• 1992

유한수심의 해역에서 운동하는 잠수체 혹은 부유체의 조파저항을 계산하기 위하여 Hess & Smith(1962)와 Dawson(1977)류의 패널법을 개발하였다. 수면상에서의 경계조건은 소위 Poisson 식을 사용하였는데, 비슷한 문제에 대해 Yasukawa(1989)는 이중물체유동을 기본유동으로 하는 Damson식을 사용한 바 있다. 수저면에서의 경계조건을 자동적으로 만족시키기 위하여 Rankine 쏘오스와 수저면에 대한 경상 쏘오스의 합을 Green 함수로 취하였으며, 따라서 특이점은 선체와 자유표면 상에만 분포시키면 되므로 필요한 패널의 수는 Yasukawa의 방법에 비해 절반이하로 감소되었다. 계산예로서는 잠수한 구와 Wigley선형을 택하였으며, 기존의 해석해 및 수치해와 비교하여 잘 일치하는 결과를 얻었다.