• Korean Journal of Materials Research
• /
• v.11 no.5
• /
• pp.419-426
• /
• 2001

The stochiometric $AgGaSe_2$ polycrystalline mixture of evaporating materials for the $AgGaSe_2$ single crystal thin film was prepared from horizontal furnace. To obtain the single crystal thin films, $AgGaSe_2$ mixed crystal and semi-insulating GaAs(100) wafer were used as source material and substrate for the Hot Wall Epitaxy (HWE) system, respectively. The source and substrate temperature were fixed at$ 630^{\circ}C$ and $420^{\circ}C$, respectively. The thickness of grown single crystal thin films is 2.1$\mu\textrm{m}$. The single crystal thin films were investigated by photoluminescence and double crystal X-ray diffraction(DCXD) measurement. The carrier density and mobility of AgGaSe$_2$ single crystal thin films measured from Hall effect by van der Pauw method are $4.89\Times10^{17}$ cm$^{-3}$ , 129cm2/V.s at 293K, respectively. From the Photocurrent spectrum by illumination of perpendicular light on the c-axis of the AgGaSe$_2$ single crystal thin film, we have found that the values of spin orbit splitting $$\Delta$S_{o}$ and the crystal field splitting $\Delta$C$_{r}$, were 0.1762eV and 0.2474eV at 10K, respectively. From the photoluminescence measurement of AgGaSe$_2$ single crystal thin film, we observed free excision (EX) observable only in high quality crystal and neutral bound exciton ($D^{o}$ , X) having very strong peak intensity. And, the full width at half maximum and binding energy of neutral donor bound excition were 8mev and 14.1meV, respectively. By Haynes rule, an activation energy of impurity was 141 meV.ion energy of impurity was 141 meV.

• Journal of Life Science
• /
• v.26 no.9
• /
• pp.1056-1062
• /
• 2016

Lung cancer is currently the most common malignant disease and the leading cause of mortality in the world and non-small cell lung cancer (NSCLC) accounts for 75-80% of lung cancer cases. miR-155 gene was found to be over expressed in several solid tumors, such as thyroid carcinoma, breast cancer, colon cancer, cervical cancer, pancreatic ductal adenocarcinoma (PDAC) and lung cancer. The aims of this study were to define the expression of miR-155 in lung cancer and its associated clinic-pathologic characteristics. Total RNA was purified from formalin-fixed, paraffin-embedded NSCLC tissues and benign lung tissues. Expression of miR-155 in human lung cancer tissues were evaluated as mean fold changes of miR-155 in cancer tissues compared to benign lung tissues by quantitative real-time reverse transcriptase polymerase chain reaction (real-time qRT-PCR) and associations of miR-155 expression with clinic-pathologic findings of cancer. Compared with the benign control group, miR-155 expression was significantly overexpressed in NSCLCs (p=<0.001). miR-155 was more overexpressed in squamous cell carcinoma than in adenocarcinoma. Poorly differentiated tumors showed significantly overexpression of miR-155 than well-differentiated tumors (p=<0.001). Overexpression of miR-155 was significantly associated with lymph node metastasis (p=<0.05). In survival analysis for all NSCLC patients, high miR-155 expression was significantly correlated with worse overall survival (p=<0.05). These results suggested that miR-155 might play an important role in lung cancer progression and metastasis.

• Korean Security Journal
• /
• no.53
• /
• pp.63-79
• /
• 2017

Defence Security Command is the only military intelligence and investigation agency which is in charge of safeguarding military information and investigating specific crimes such as subversion and disloyalty in military. While the presidential security provided by Defence Security Command, along with Presidential Security Service(PSS) and the police, forms one of three pillars sustaining presidential security, its works and activities have been rarely known to the public due to the military confidentiality. This study looks into some data specialized into the presidential security among works of Defense Security Command by using various resources such as biographies of key people, media reports, and public materials. It reviews the presidential security works in a historical sense that the works have developed and changed in accordance with the historical changes of Defense Security Command, which was rooted in Counter-Intelligence Corps (Teukmubudae in Korean) in 1948 and leads to the present. The study findings are as follows. First, when the Korean War broke out in 1950 and since then the South Korea was under the threat of the North Korean armed forces and left wing forces, Counter-Intelligence Corps(Bangcheopdudae in Korean) took the lead in presidential security more than the police who was in charge of it. Secondly, even after the Presidential Security Office has founded in 1963, the role of the military on presidential security has been extended by changing its titles from Counter-Intelligence Corps to Army Security corps to Armed Forces Security Command. It has developed their provision of presidential security based on the experience at the president Rhee regime when they could successfully guard the president Rhee and the important government members. Third, since the re-establishment into Defence Security Command in 1990, it has added more security services and strengthened its legal basis. With the excellent expertise, it played a pivotal role in the G20 and other state-level events. After the establishment of the Moon Jaeinin government, its function has been reduced or abolished by the National Defense Reform Act. However, the presidential security field has been strengthening by improving security capabilities through reinforcing the organization. This strengthening of the security capacity is not only effective in coping with the current confrontation situation with the hostile North Korean regime, but also is important and necessary in conducting constant monitoring of the military movement and security-threat factors within military during the national security events.

• Radiation Oncology Journal
• /
• v.12 no.3
• /
• pp.337-347
• /
• 1994

Breast conserving surgery and irradiation is now accepted as preferable treatment method for the patients with stage I and II breast cancer. Our institution activated team approach for breast conservation in 1991 and treated one hundred and fourty patients during the next three years. Purpose : To present our early experience with eligibility criteria, treatment techniques, and the morbidities of primary radiotherapy. Materials and Methods: Sixty four patients with early stage breast cancer who received breast conserving treatment between January 1991 and December 1992 were evaluated. All patients received partial mastectomy(wide excision to quadrantectomy) and axillary node dissection followed by radiotherapy. Total dose of 4500-5040 cGy in 5-5 1/2 weeks was given to entire involved breast and boost dose of 1000-2000 cGy in 1-2 weeks was given to the primary tumor site. Linac 4 MV X-ray was used for breast irradiation and electron beam was used for boost. Thirty five Patients received chemotherapy before or after radiotherapy. Patients characteristics, treatment techniques, and treatment related morbidities were analyzed. Results : Age distribution was ranged from 23 to 59 year old with median age of 40. Twenty-seven patients had T1 lesions and 34 patients had T2 lesions. In three patients, pathologic diagnosis was ductal carcinoma in situ. Thirty-seven Patients were N0 and 27 patients were Nl. There were three recurrences, one in the breast and two distant metastases during follow-up period(6-30 months, median 14 months). Only one breast recurrence occured at undetected separate lesion with microcalcifications on initial mammogram. There was no serious side reaction which interrupted treatment courses or severe late complication. Only one symptomatic radiation pneumonitis and one asymptomatic radiation pneumonitis were noted. Conclusions: Conservative surgery and primary radiotherapy for early breast cancer is Proven to be safe and comfortable treatment method without any major complication. Long-term follow up is needed to evaluate our treatment results in terms of loco-regional control rate, survival rate, and cosmetic effect.

• Membrane Journal
• /
• v.25 no.2
• /
• pp.191-201
• /
• 2015

We have studied on the preparation of $TiCo_xFe_{1-x}$(x=0.50~1.00) system alloy, the characteristics of $TiCo_xFe_{1-x}$(x=0.50~1.00) system alloy by X-ray diffractometer (XRD), pressure composition temperature (PCT) curve, scanning electron microscopy (SEM) and the $H_2-N_2$ gas mixture separation of $TiCo_xFe_{1-x}$(x=0.50~1.00)- stainless steel (SS) composite membranes. The formation of $TiCo_xFe_{1-x}$(x=0.50~1.00) system alloys with cubic crystal same as TiCo was confirmed by X-ray diffractometer. $TiCo_xFe_{1-x}$(x=0.50~1.00) system alloys showed the hysteresis at $120^{\circ}C$. As the Fe content of $TiCo_xFe_{1-x}$(x=0.50~1.00) system alloys increased, the hysteresis was increased both range x=0.90~1.00 and x=0.55~0.60, and the range x=0.55~0.90 gave decreased hysteresis. $TiCo_{0.55}Fe_{0.45}$ alloy was the one showed the lowest hysteresis among them. The lowest value of hydrogen permeation pressure of $TiCo_xFe_{1-x}$(x=0.50~1.00)-SS composite membrane was $TiCo_{0.55}Fe_{0.45}$-SS composite membrane with the value of 2.5 atm at $120^{\circ}C$; otherwise, $TiCo_{0.90}Fe_{0.10}$-SS composite had the highest pressure value among the membranes with the value of 10 atm. $TiCo_{0.55}Fe_{0.45}$-SS composite membrane was the best to separate the $H_2-N_2$ gas mixture excellently among the $TiCo_xFe_{1-x}$(x=0.50~1.00)-SS composite membranes since $TiCo_{0.55}Fe_{0.45}$ had the least hysteresis, and hydrogen permeation pressure was the lowest with value of 2.5 atm.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.4
• /
• pp.765-773
• /
• 2000

The degradation of humic acid using $TiO_2$ coatings was studied, $TiO_2$ coatings were prepared by dip-coating method. Sol solutions for coating were prepared by mixing the gel, which can be produced by the reaction of $TiOCl_2$ and $NH_4OH$ solution, and hydrogen peroxide solution, and hydrolysis of titanium tetraisopropoxide (TTIP). It was shown from XRD that coatings from sol aged at $100^{\circ}C$ for 18h with titanium peroxo solution were crystallized to anatase in the range of temperatures of $25^{\circ}C$ to $500^{\circ}C$. In contrast, those coated from TTIP were crystallized to anatase at temperature above $400^{\circ}C$. So the sols originated from $TiCl_4$ can be applied for not only on the heat-resistance substrates but on the plastic substrates. Thickness and the quality of the films were dependent on the withdrawing speed, the concentration of sol, and the number of coating. The films showed various interference colors depending on the thickness of them. In the case that the films coated 2 times at withdrawing speed of 2.5cm per minute by 0.2M sol, the films had a transparent light blue color with thickness of around 50nm. It was known from the result of photo-degradation by $TiO_2$ coatings using humic acid that the removal efficiency of $COD_{cr}$ was over 85% after illumination of $UV/H_2O_2$ for 40min. and that of UV/VIS absorbable materials was over 95%.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.3
• /
• pp.179-191
• /
• 2013

This study was conducted to comparatively assess quantitative indicating factor for biomineralization characterizing $CO_2$ mineralization on three type of minerals (i.e., $CaCl_2$, $MgCl_2$, $CaCl_2-MgCl_2$) in an aqueous solution amended with Bacillus pasteurii or indigenous microorganisms for a S landfill cover soil. For given three types of minerals, $NH_4{^+}$ (urease activity) was released at the highest of 88 mg/L for $MgCl_2$, then 85 mg/L for $CaCl_2$, and the lowest of 42 mg/L for $CaCl_2-MgCl_2$. $CO_2$ gas in the head space was completely removed after 12, 12, and 24 hr for $CaCl_2$, $MgCl_2$ and $CaCl_2-MgCl_2$, respectively. $Ca^{2+}$ concentration in $CaCl_2$ solution was the quickest and the greatest decreased 92% for 12 hr whereas that in $CaCl_2-MgCl_2$ solution was lower at 85% for 36 hr. $Mg^{2+}$ concentration in $MgCl_2$ was more efficiently decreased at 46% for 48 hr than that of $CaCl_2-MgCl_2$ solution of 38.5% for 72 hr. Regardless of types of minerals or their concentration, pH was changed from 5.5 to 9 by biomineralization being progressed. Microbial activity ($OD_{600}$) was also changed from 0 to 0.6. SEM images indicated that spheroidal and trapezoid shape crystal were formed, which were identified as of $CaCO_3$ (Calcite) and $MgCO_3$ (Magnesite) by X-ray diffraction. In the long run, $NH_4{^+}$ (urease activity), $CO_2$ gas, $OD_{600}$, pH, $Ca^{2+}$ and $Mg^{2+}$ would be suitable for reasonable indicating factor in order to assess the degree of biomineralization efficiency.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.8
• /
• pp.533-539
• /
• 2013

Korea is one of the top countries that has funded great amount to promote basic research and others in recent decade. While the quantity of R&D fund in Korea has rapidly increased, the effectiveness and quality of R&D outcomes became a controversial issue. National Research Foundation of Korea (NRF) and Korea Environmental Industry & Technology Institute (KEITI) agreed to collaborate for diffusing and utilizing R&D outcomes of each institute. NSF and KEITI signed the bilateral MOU in 2012, and Interministerial Collaborative R&D Support Framework (ICR&DSF) was developed. The ICR&DSF consist of launching an Eco-Bridge Program as an interministerial R&D program and composition of Environmental Convergence R&D Bridge Committee. The Eco-Bridge Program was applied to 'Environmental Convergence Technology Project' of KEITI as a pilot program in 2012. The unique feature of this interministerial R&D program is that the Eco-Bridge Program directly supports the basic research outcomes which are previously funded by NRF. As the collaboration between NRF and KEITI becomes stronger, it is expected to explore the more creative and the more transformative research.

• Korean Journal of Food Science and Technology
• /
• v.28 no.2
• /
• pp.330-336
• /
• 1996

Quality characteristics of mash of takju prepared by different raw materials such at nonglutinous rice. glutinous rice, barley and wheat flour were investigated during fermentation. At the beginning stage of fermentation, ethanol content was in the range of $0{\sim}1.2%$ but it was increased to $9.8{\sim}11.6%$ after 16 day of fermentation. takju that was made of nonglutious rice with starter showed higher ethanol content than any other treatment. At the first stage, pH of takju that was made of nonglutinous rice without starter was 6.57 while other sample showed pH $5.04{\sim}5.80.$ There was no significant difference in pH value between treatments after 2 day of fermentation. Total acid was increased rapidly at the first stage of fermentation, and increased slowly after 2 day of fermentation. Takju that was made of nonglutious rice without of fermentation, and increased slowly after 2 day of fermentation. Takju that was made of nonglutious rice without addition starer showed higher total acid content than the other teratments. Total sugar contents were $19.18{\sim}20.23%$ at the beginning of fermentation, and decreased to $5.21{\sim}14.03%$ after 2-4 days of fermentation. Takju that was made of wheat flour showed higher value of total sugar during the fermentation. Reducing sugar contents of takju decreased with fermentation progressing to $0.2{\sim}0.5%$ after 16 day if fermentation. L value decreased during the fermentation. period and that of takju that was made of barley had lowest L value among the treatment. Alcohols, such as n-propanol ($nd{\sim}0.05\;mg/ml$), iso-butanol (0.02), iso-amyl alcohol ($nd{\sim}0.13$), n-hexanol ($nd{\sim}0.17$), n-heptanol ($nd{\sim}0.09$), and phenylethanol ($nd{\sim}0.02$) were detected. There were no alcohols detected at the beginning of fermentation, but their contents were increased during fermentation.

• Journal of the Korean earth science society
• /
• v.22 no.4
• /
• pp.278-291
• /
• 2001

Mesothermal gold vein minerals of the Seolhwa mine were deposited in a single stage of massive quartz veins which filled the mainly NE-trending fault shear zones exclusively in the granitoid of the Gyeonggi Massif. The Seolhwa mesothermal gold mineralization is spatially associated with the Jurassic granitoid of 161 Ma. The vein quartz contains three main types of fluid inclusions at 25$^{\circ}$C: 1) low-salinity (< 5 wt.% NaCl), liquid CO$_{2}$-bearing, type IV inclusion; 2) gas-rich (> 70 vol.%), aqueous type II inclusions; 3) aqueous type I inclusions (0${\sim}$15 wt.% NaCl) containing small amounts of CO$_{2}$. The H$_{2}$O-CO$_{2}-CH$_{4}$-N$_{2}$-NaCl inclusions represent immiscible fluids trapped earlier along the solvurs curve at temperatures from 430$^{\circ}$ to 250$^{\circ}$C and pressures of 1 kbars. Detailed fluid inclusion chronologies may suggest a progressive decrease in pressure during the auriferous mineralization. The aqueous inclusion fluids represent either later fluids evelved through extensive fluid unmixing (CO$_{2}-CH$_{4}$ effervescence) from a homogeneous H$_{2}$O-CO$_{2}-CH$_{4}$-N$_{2}$-NaCl fluid due to decreases in temperature and pressure, or the influence of deep circulated meteoric waters possibly related to uplift and unloading of the mineralizing suites. The initial fluids were homogeneous containing H$_{2}$O-CO$_{2}-CH$_{4}$-N$_{2}$-NaCl components and the following properties: the initital temperature of >250$^{\circ}$ to 430$^{\circ}$C, X$_{CO}\;_{2}$ of 0.16 to 0.62, 5 to 14 mole% CH$_{4}$, 0.06 to 0.3 mole% N$_{2}$ and salinities of 0.4 to 4.9 wt.% NaCl. The T-X data for the Seolhwa gold mine may suggest that the Seolhwa auriferous hydrothermal system has been probably originated from adjacent granitic melt which facilitated the CH$_{4}$ formation and resulted in a reduced fluid state evidenced by the predominance of pyrrhotite. The dominance of negative ${\delta}\;^{34}$S values of sulfides (-0.6 to 1.4$%_o$o) are consistent with their deep igneous source.