• Journal of the Korean Society of Propulsion Engineers
• /
• v.16 no.6
• /
• pp.32-40
• /
• 2012

For predicting eigenfrequency and initial growth rate of combustion instabilities in lean premixed gas turbine combustor, linear thermoacoustic analysis model was developed in the current paper. A model combustor was selected for the model validation, which has well-defined inlet and outlet conditions and a relatively simple geometry, compared to the combustor in the previous works. Analytical linear equations for thermoacoustic waves were derived for a given combustion system. It was found that the prediction results showed a good agreement with the measurements, even though there was underestimation for instability frequencies. This underestimation was more obvious for a longer flame (i.e. wider temperature distribution) than for a shorter flame.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.1
• /
• pp.118-123
• /
• 2008

This paper proposes a frequency transfer function synthesis for approximating a high-order model with resonance to a low-order model in the frequency domain. The presented model approximation method is based on minimizing the error function weighted by the numerator polynomial of approximated models, which is used of the RLS(Recursive Least Square) technique to estimate the coefficient vector of approximated models. The proposed method provides better fitting in a low frequency and peak resonance. And an example is given to illustrate feasibilities of the suggested schemes.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.180.1-180.1
• /
• 2012

과학기술위성 3호는 우리 은하계의 근적외선 관측, 우주 배경복사 관측 및 지구 지표면의 적외선 영상 획득을 임무로 하는 우주관측용 적외선카메라와 지구 지표면의 적외선 영상 획득을 임무로 하는 지구관측용 적외선카메라 그리고 한반도 지역의 다중 스펙트럼 영상을 획득함으로써 대기관측 및 환경감시의 임무를 가지는 소형분광영상카메라를 장착한 우주 및 지구과학 연구용 위성이다. 2007년 개발을 시작하여 시험인증모델(EQM, Engineering & Qualification Model) 개발과 열구조모델 (STM, Structure and Thermal Model)을 개발 완료하였고, 2012년 하반기에 발사를 앞두고 2010년 비행모델 유닛들이 납품되기 시작하여 위성체 시스템 레벨에서의 조립 및 시험을 진행하고 있다. 본 논문에서는 조립 및 기능시험 완료후 시스템 레벨에서의 진동 시험, 열진공 시험 및 무게특성 시험등 환경시험의 종류, 목적 그리고 검증 결과를 발표하고자 하며, 아울러 발사장에서 수행된 열구조모델에 대한 환경시험 결과를 발표하고자 한다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.97-97
• /
• 2016

가뭄은 홍수와 더불어 매우 심각한 자연재해이며, 그 특성상 광역적이고 장기간 발생함에 따라 구체적인 발생시점, 규모, 범위 등을 규명하기가 어렵다. 다만, 적시에 경보해야 하는 홍수와 달리 진행속도가 느리고 시간적으로 대처할 여유가 있어 진행중 일지라도 초기에 감지한다면 그 피해를 최소화할 수 있다. 미국 등 수문기상 선진국에서는 수문기상 장기예보자료를 활용한 가뭄전망정보 생산 및 제공하고 있으며, 활용성을 검증한바 있다. 국내의 경우 기상청에서는 대기-해양-해빙 모델을 접합한 GloSea5 (Global Seasonal forecasting system version 5) 모델을 도입하였으며, 가뭄예보를 목적으로 장기예보자료 기반의 가뭄전망정보 생산체계를 구축한 바 있다(기상청, 2012; 손경환 등, 2015). 본 연구에서는 장기예보자료 기반의 수문기상 전망정보를 이용하여 2014-15년 가뭄사례에 대한 가뭄감시 및 전망정보를 생산 및 평가하였다. 수문기상전망 정보는 기상청 현업예보 모델인 GloSea5와 지면모델을 이용하여 생산하였으며, 관측자료와 수문전망정보 기반의 가뭄지수를 산정하였다. 매스컴 및 언론 보도 자료부터 2014-15년 가뭄에 대한 행정구역별 피해사례를 수집하였으며, 이를 기반으로 시계열, 지역별 및 통계적(CC, RMSE) 분석을 이용하여 선행시간별 정확도를 평가하였다. 1개월 및 2개월 전망정보의 정확도가 높음을 확인하였으며, 가뭄심도가 심각한 시기의 가뭄상황을 적절히 재현하는 것으로 나타났다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.4A
• /
• pp.447-456
• /
• 2008

This paper suggests a modified debonding failure model for the externally bonded prestressed CFRP plate strengthening system. In order to reduce the error that may occur in the experimental results, statistical analysis of the experimental results produced by previous researchers was conducted to propose a debonding failure model. The experimental results of beams strengthened with bonded CFRP plates have made it possible to verify the debonding failure occurring before the final failure in the prestressing system. The corresponding strain increased with the effective prestress. Accordingly, the debonding failure model was modified by considering the effective prestress so as to fit with the CFRP prestressing system.

• Journal of the Korean Chemical Society
• /
• v.53 no.6
• /
• pp.653-662
• /
• 2009

Developing effective tools for predicting absorption, distribution, metabolism, excretion properties and toxicity (ADME/T) of new chemical entities in the early stage of drug design is one of the most important tasks in drug discovery and development today. As one of these attempts, support vector machines (SVM) has recently been exploited for the prediction of ADME/T related properties. However, two problems in SVM modeling, i.e. feature selection and parameters setting, are still far from solved. The two problems have been shown to be crucial to the efficiency and accuracy of SVM classification. In particular, the feature selection and optimal SVM parameters setting influence each other, which indicates that they should be dealt with simultaneously. In this account, we present an integrated practical solution, in which genetic-based algorithm (GA) is used for feature selection and grid search (GS) method for parameters optimization. hERG ion-channel inhibitor classification models of ADME/T related properties has been built for assessing and testing the proposed GA-GS-SVM. We generated 6 different models that are 3 different single models and 3 different ensemble models using training set - 1891 compounds and validated with external test set - 175 compounds. We compared single model with ensemble model to solve data imbalance problems. It was able to improve accuracy of prediction to use ensemble model.

• Aerospace Engineering and Technology
• /
• v.13 no.1
• /
• pp.63-69
• /
• 2014

The oxidizer-rich preburner's combustion tests were fulfilled in the development process of staged combustion cycle rocket engines. The exhaust plume from an oxidizer-rich preburner is relatively transparent because combustion takes place in oxidizer rich state. During hot fire tests a still and infrared images were captured to visualize the plume structure, temperature distribution and so on. In addition, the exhaust plume was numerically investigated to figure out the detailed characteristics. The combustion was not considered for the numerical modeling, but the mixing of exhaust plume with circumstantial air was modeled by species transport model with several turbulence models. The inner structure of plume was configured out by the comparison of numerical results with experimental results, and the validity of applied numerical models was verified.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.1 no.2
• /
• pp.49-56
• /
• 1987

To save energy consumption, it is proposed to operate a discharge lamp with high frequency power. When designing a high frequency operating circuit containing a discharge lamp, the character of a lamp may be needed. And there are various methods to get and models for this. In this study, to present the volt-ampere character of a fluorescent lamp which gives a good saving effect, the nonlinear resistance model is suggested. And the validity of the model is verified by applying the model for the circuits with inductor ballast and capacifor ballast. This model, in contrast with the others, can be easily obtainable. And for comparison, the model using a modified Francis equation is examined. The method used in this study can be basically applied to the other discharge lamps. As a result, 1) Approximated 3rd order polynomial of nonlinear resistance model gives a good simulation result. 2) When operating in high frequency, the model using a modified Francis equation with constant coefficients can't be applied.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.1
• /
• pp.37-45
• /
• 2012

This study investigates the pressure leakage characteristics of a desiccant rotor with a brush-type air seal. Through a pressure leakage experiment, a correlation equation for the leakage air flow rate is obtained as a function of the air seal area and pressure difference. Using this equation, an air leakage model for the desiccant rotor is developed. By comparing simulation results with the experimental results for the desiccant rotor, the accuracy of the air leakage model is demonstrated. A performance test of a desiccant rotor with various air flow rates is carried out. Using the air leakage model, the effective mass flow rate and air leakage rate are found. In addition, the characteristics of the air leakage are analyzed for a desiccant cooling system using the developed air leakage model.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.4
• /
• pp.223-230
• /
• 2014

In this paper, the wind-induced response characteristics of freeform shaped tall building is studied by using FSI analysis. The analytical models are twist shaped ones at representing type of atypical tall building, and this study focused on the relationship between twist angle and wind acceleration. Firstly, 1-way FSI analysis is performed, so maximum lateral displacement of the analytical model for 100 years return period wind speed is calculated, then the elastic modulus of a structure that satisfies the constraints condition is evaluated. And 2-way FSI analysis is carried out. so acceleration of the analytical model for the evaluated modulus of elasticity and arbitrary density is predicted through time history analysis. The basic model is a set of a square shape, height is 400m, slenderness ratio is 8, and twist model is rotated at square model from 0 to 90 degrees at intervals of 15 degrees and from 90 to 360 degrees at intervals of 90 degrees. According to the result of predicting wind acceleration by the shape of each model, the wind vibration effect of square shape model is confirmed to be sensitive more than a twist shape ones.