• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.4
• /
• pp.352-357
• /
• 2000

The vector control scheme is usually applied to the high performance induction motor drives. The PI controller is adopted traditionally to control the motor speed and currents in the vector control scheme. In this case, the dynamic performance of the induction motor is dependent on the PI gains and the gain optimization is necessary in order to get a good dynamic performance. But, it is very hard to optimize the PI gains uniquely within the speed control range because the equivalent model of the motor control system should be known exactly. In this paper, we propose the hybrid control scheme to remove the defects of PI controller. The hybrid control scheme includes the simplified fuzzy controller which operates in the transient state and the PI controller which operates in the steady state. The proposed scheme is applied to the vector control for induction motor, and the digital simulation and the experimental results are given to verify the proposed scheme.

• Journal of KIISE:Databases
• /
• v.35 no.4
• /
• pp.319-332
• /
• 2008

Data cube, which is multi-dimensional data model, have been successfully applied in many cases of multi-dimensional data analysis, and is still being researched to be applied in data stream analysis. Data stream is being generated in real-time, incessant, immense, and volatile manner. The distribution characteristics of data arc changing rapidly due to those characteristics, so the primary rule of handling data stream is to check once and dispose it. For those characteristics, users are more interested in high support attribute values observed rather than the entire attribute values over data streams. This paper propose dynamic data cube for applying data cube to data stream environment. Dynamic data cube specify user's interested area by the support ratio of attribute value, and dynamically manage the attribute values by grouping each other. By doing this it reduce the memory usage and process time. And it can efficiently shows or emphasize user's interested area by increasing the granularity for attributes that have higher support. We perform experiments to verify how efficiently dynamic data cube works in limited memory usage.

• Journal of Korean Society for Geospatial Information Science
• /
• v.19 no.4
• /
• pp.145-151
• /
• 2011

Evapotranspiration (ET) is an important process acrossa wide range of disciplines, including ecology, hydrology and meteorology.In this study, daily actual evapotranspiration (ETa) is based energy balance equation and considering high surface roughness length to estimate. This study was used variety of satellite data and ground observation data in Korea Peninsula from 1 January to 31 December 2009. In this study, sensible heat flux is one of the important parameters of ETa. Measurements of sensible heat flux are, however, complex and can't be easily obtained. So this study was used an empirical coefficient B to simplify estimate of sensible heat flux. The coefficient B in the ETa model requires a careful definition of aerodynamic resistance. So this study proposed ETa model considering aerodynamic resistance and high surface roughness length. This study was conducted validation in comparison of the proposed daily ETa results with Priestley-Taylor ETp.

• Journal of the Korean Society for information Management
• /
• v.34 no.2
• /
• pp.47-80
• /
• 2017

The purpose of this study is to develop an adoptive model of institutional repositories (IRs) by identifying the key factors affecting adoptive intention of IRs and explaining the relations among these factors. Through a survey of 270 researchers and 12 in-depth interviews in the field of physics, mathematics, and life science in Korea, performance expectancy, perceived risks, socio-organizational influence, and individual characteristics were found to have substantial influences on the adoptive intention of IRs. Among the key factors, individual characteristics showed the greatest effect on the adoptive intention of IRs, followed by performance expectancy and other socio-organizational influences except for the perceived risks. Strategies to enhance the adoptive intention of IRs based on analyses of the results were suggested, in terms of the reformation of research assessment system at the national level, strengthening of role of the operational institution, and the need for voluntary scientists-participating service.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.3
• /
• pp.39-49
• /
• 2003

The delta operator approach and the singular perturbation technique are introduced. The former reduces the round-off error in the numerical computation. The latter reduces computing time by decoupling the original system into the fast and slow sub-systems. The aircraft dynamics consists of the Phugoid and short-period motions whether its model is longitudinal or lateral. In this paper, an approximated solutions of lateral dynamic model of Beaver obtained by using those two methods in compared with the exact solution. For open-loop system and closed-loop system, and approximated solution gets identical to the exact solution with only one iteration and without iteration, respectively. Therefore, it is shown that implementing those approaches is very effective in the flight dynamic and control.

• Tunnel and Underground Space
• /
• v.19 no.5
• /
• pp.407-420
• /
• 2009

In this study geostatistical technique using indicator kriging was performed to evaluate the optimal rock mass classification by integrating the various geophysical information such as borehole data and geophysical data. To get the optimal kriging result, it is necessary to devise the suitable technique to integrate the hard (borehole) and soft (geophysical) data effectively. Also, the model parameters of the variogram must be determined as a priori procedure. Iterative non-linear inversion method was implemented to determine the model parameters of theoretical variogram. To verify the algorithm, behaviour of object function and precision of convergence were investigated, revealing that gradient of the range is extremely small. This algorithm for the field data was applied to a mountainous area planned for a large-scale tunneling construction. As for a soft data, resistivity information from AMT survey is incorporated with RMR information from borehole data, a sort of hard data. Finally, RMR profiles were constructed and attempted to be interpreted at the tunnel elevation and the upper 1D level.

• Korean Journal of Remote Sensing
• /
• v.27 no.4
• /
• pp.421-433
• /
• 2011

The importance of acquisition of road information has recently been increased with a rapid growth of spatial-related services such as urban information system and location based service. This paper proposes an automatic road extraction method using object-based approach which was issued alternative of pixel-based method recently. Firstly, the spatial objects were created by MSRS(Modified Seeded Region Growing) method, and then the key road objects were extracted by using properties of objects such as their shape feature information and adjacency. The omitted road objects were also traced considering spatial correlation between extracted road and their neighboring objects. In the end, the final road region was extracted by connecting discontinuous road sections and improving road surfaces through their geometric properties. To assess the proposed method, quantitative analysis was carried out. From the experiments, the proposed method generally showed high road detection accuracy and had a great potential for the road extraction from high resolution satellite images.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.114-114
• /
• 2009

최근 국내외에서 자동차 연비와 성능 향상을 위하여 고부가가치 자동변속기의 개발이 적극적으로 추진되고 있다. 특히, 유럽(ZF)과 일본(JATCO, AISIN)을 비롯한 변속기 부품의 기술선진국에서는 전자빔 용접을 적용한 고부가가치 자동변속기 제품이 개발되어 다양한 고급차 모델에 적용되고 있으며 2010년까지 8속 자동변속기를 출시할 예정으로 개발을 추진하고 있다. 이러한 자동변속기를 개발하기 위하여 부품의 성형 및 가공정밀도 관리가 중요하며, 최종 조립되는 부품의 전처리(연질화처리, 탈지, 이물질 제거등)와 용접시 용접변형을 최소화하기 위한 공정조건의 엄격한 관리가 요구되고 있다. 변속기 부품으로 사용되는 소재는 성형성 확보를 위한 연질재(SPCC)와 강도를 확보하기 위한 고강도강(SAPH400, SPFH590)으로 서로 다른 두께의 재질이 조립되어 최종단계에서 용접공정에 의해 제작되고 있다. 특히, 연질재는 복잡한 형상으로 성형한 다음, 가공을 거쳐 경화를 위한 연질화처리가 요구되기 때문에 건전한 용접을 하기 위해서는 용접면에 접한 연질화 처리부는 연질화 처리재가 잔존하지 않도록 완전한 제거할 필요가 있다. 만약 전처리 공정에서 충분한 세척과 가공품의 정도관리가 확보되지 않으면 전자빔 용접시 고온에서 이물질 증발과 잔류, 스패터 발생등에 의한 용접부 결함발생이나 용접변형으로 인하여 제품불량이 발생하게 된다. 따라서 본 연구에서는 최종 조립공정인 용접작업시 발생되는 결함을 방지하고 이 두께 및 이종소재의 전자빔 용접비드 형상(비드 폭, 용입깊이)을 최적화 함으로서 용접부 변형을 최소화하고 충분한 강도를 확보하고자 전자빔 용접전류와 속도에 따른 비드형상을 비교검토 하고자 하였다. 그리고 실차적용시 신뢰성을 확보하기 위하여 전자빔 용접한 자동차 변속기 부품의 비틀림 시험을 실시하였으며 전자빔 용접 전, 후의 변형량을 측정하여 변속기 부품으로서의 적용성을 검증하고자 하였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.6
• /
• pp.603-611
• /
• 2016

Research and development of mineral-resource-related products has progressed with the increased need to develop mineral resources. The DTH hammer is a resultant product. However, owing to particular work conditions of underground drilling, it is difficult to obtain direct data on the DTH hammer. A DTH drill rig requires a significant amount of money and time for actual testing. This thesis aimed to resolve this problem by using CAE. In a previous paper, the structure of the DTH hammer and its movement were analyzed, and a standard model based on simulation was proposed. Then, experimentation and comparison verification were conducted. In this paper, by using an experimental design method, we derived a control factor of the impact force and efficiency of the DTH hammer and attempted to optimize the design. As a result, the impact energy increased by 14.9%, and the efficiency increased by 3.3%.

• Journal of Internet Computing and Services
• /
• v.5 no.1
• /
• pp.51-57
• /
• 2004

Mobile Internet allows users to request critical information and receive swift responses at any places, but mobile users could suffer from unreliable and ill-timed services due to the characteristics of wireless media, One way that reduces possibility of the unsatisfactory services is data replication. Data Replica1ion, however, inevitably induces the overhead of maintaining replica consistency which requires more expensive synchronization mechanism. We propose a new replicated data management scheme in distributed mobile environment, In order to alleviate negative impact of synchronization message overhead in fault-prone mobile Internet environment, we devise a new replication control scheme called proxy quorum consensus (PQC), PQC minimizes the message overhead by coordinating quorum access activities by means of proxy mediated voting (PMV) which exploits reliable proxy hosts instead of unreliable mobile hosts in voting process, We also propose a simulation model to show the performance of PQC. Based on the results of the performance evaluation, we conclude that PQC scheme outperforms the traditional schemes.