• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.5
• /
• pp.85-95
• /
• 2017

This study aims to identify the throw distance in terms of truck weight, bumper height, and speed in a truck and pedestrian collision, and to propose a model for throw distance estimates. For this purpose, a simulation analysis is performed using the PC-crash program with the following experiment conditions: Truck weight of 5t, 15t, and 25t, Bumper height from 0.3m to 0.6m by 0.1m, and speed from 10km/h to 100km/h by 10 km/h. Experimental results show that the truck speed and bumper height are found to be significant factors for pedestrian throw distance, but truck weight is not a significant factor. Also, a regression model is developed for pedestrian throw distance estimate from the multiple regression analysis. The adjusted $R^2$ value of the model is 93.3%, which is very good explanatory power.

• Tunnel and Underground Space
• /
• v.23 no.5
• /
• pp.353-361
• /
• 2013

Previous studies for analyzing optimal haulage routes of dump trucks in open pit mines mostly used raster data. However, the raster data has several problems in performing optimal route analyses: (1) the jagged appearance of haulage roads according the cell resolution often causes overestimation of the travel cost; (2) it difficult to trace the topological relationships among haulage roads. These problems can be eliminated by using vector network data, however a new method is required to reflect the performance characteristics of a dump truck according to terrain gradient changes. This study presents a new method to create vector network data with the consideration of terrain gradient for analyzing optimal haulage routes of dump trucks in open pit mines. It consists of four procedures: (a) creating digital elevation models, (b) digitizing haulage road networks, (c) calculating the terrain gradient of haulage roads, and (d) calculating the average speed and travel time of a dump truck along haulage roads. A simple case study at the Roto South pit in the Pasir open pit coal mine, Indonesia is also presented to provide proof that the proposed method is easily compatible to ArcGIS Network Analyst software and is effective in finding optimal haulage routes of dump trucks with considering terrain gradient in open pit mines.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2000.11a
• /
• pp.49-55
• /
• 2000

고객들의 주문에 대하여 오더픽킹을 수행하여 출하하는 물류센터에서는 매일 여러 공급사로부터의 다양한 입고물량이 창고 내에서 신속, 정확하게 주문에 따라 고객별로 픽킹되어 출하트럭에 상차되어야 한다. 이때 인테리어 가구류를 취급하는 물류센터의 경우에는 출하팔렛에 적재시 특정한 품목순서에 따라 적재해야 하는 제약조건 때문에 이를 위한 팔렛 재처리 작업이 필요하게 된다. 본 논문은 Closed Loop형 궤도상을 움직이는 대차시스템을 이용해 픽킹을 수행하는 크로스도킹 물류센터에서 이러한 팔렛 재처리작업과 픽킹작업을 포함한 운영정책들의 성과를 컴퓨터 시뮬레이션으로 평가, 분석한다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.4
• /
• pp.401-407
• /
• 2016

For high fuel economy, many kinds of unit in vehicle have been developed. In steering system, as a result, HPS(Hydraulic Power Steering) system has been replaced as EHPS and EPS system. But the structures of these systems are totally different, and that causes the uncertainty of fuel economy evaluation. Therefore we undertake to research to find results and tendency of fuel economy and energy in steering system. For accurate evaluation, we modeled different types of steering systems on same vehicle model. The simulation came into action on various driving cycle. The driving condition is designed to show standby power of pump. Results show differences of fuel efficiency and energy consumption.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.4
• /
• pp.1523-1531
• /
• 2011

Multi-axle driving vehicle are favored for military use in off road operations because of their high mobility on extreme terrains and obstacles. Especially, Military Vehicle needs an ability to driving on hills of 60% angle slope. This paper presents the improvement of the ability of hill climbing for 6WD/6WS vehicle through the optimal tire force distribution method. From the driver's commands, the desired longitudinal force, the desired lateral force, and the desired yaw moment were obtained for the hill climbing of vehicle using optimal tire force distribution method. These three values were distributed to each wheel as the torque based on optimal tire force distribution method using friction circle and cost function. To verify the performance of the proposed algorithm, the simulation is executed using TruckSim software. Two vehicles, the one the proposed algorithm is implemented and the another the tire's forces are equivalently distributed, are compared. At the hill slop, the ability to driving on hills is improved by using the optimum tire force distribution method.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2014.07a
• /
• pp.427-428
• /
• 2014

화재발생 시 인명 안전을 위하여 초기의 화재감지가 매우 중요한 요인이다. 기존 연기감지기의 경우 일정한 조건만 맞으면 작동하기 때문에 비화재보의 우려가 높다. 특히 차량 매연도 연료가 연소되어 나오는 연기이므로 차량정체 시 트럭 등에서 발생하는 심한 매연에도 반응하여 오작동의 가능성이 높다. 이러한 기존 화재감지기의 문제점을 해결하기 위해 다양한 IR 레이저 기반 연기검출장치가 활용되고 있다. 하지만 IR 레이저 기반 연기검출장치는 100m 거리가 이격된 레이저 발광부와 수광부 구조에 따라 발광부 레이저광선의 각도변화에 따른 수광부 레이저 포인트 위치가 매우 민감하게 변화함에 따라 초기 레이저 포인트의 초점을 정확히 정합하고, 이후 보정하기 위한 고정밀 자동 초점 정합장치가 필요하다. 이에 본 논문에서는 레이저 투광부와 수광부를 분리하여 레이저 송신기, 수신기로 구성되는 고정밀 자동초점 정합장치를 설계하고자 한다.

• Geophysics and Geophysical Exploration
• /
• v.23 no.4
• /
• pp.230-242
• /
• 2020

We performed a magnetotelluric (MT) survey to delineate the geological structures below the depth of 20 km in the Gyeongju area where an earthquake with a magnitude of 5.8 occurred in September 2016. The measured MT data were severely distorted by electrical noise caused by subways, power lines, factories, houses, and farmlands, and by vehicle noise from passing trains and large trucks. Using machine-learning methods, we classified the MT time series data obtained near the railway and highway into two groups according to the inclusion of traffic noise. We applied three schemes, stochastic gradient descent, support vector machine, and random forest, to the time series data for the highspeed train noise. We formulated three datasets, Hx, Hy, and Hx & Hy, for the time series data of the large truck noise and applied the random forest method to each dataset. To evaluate the effect of removing the traffic noise, we compared the time series data, amplitude spectra, and apparent resistivity curves before and after removing the traffic noise from the time series data. We also examined the frequency range affected by traffic noise and whether artifact noise occurred during the traffic noise removal process as a result of the residual difference.

• Journal of the Korean Institute of Gas
• /
• v.15 no.1
• /
• pp.22-29
• /
• 2011

Pipes buried in around a construction site of urbanized area tend to be affected by the vibration caused by construction loads. The behaviors of buried pipes affected by periodic vibration were analyzed through numerical analyses based on existing study and experimental results. From the results of theses analyses, the serviceability of buried pipes subjected to vibration was verified. This study analyzed the pipe behaviors subjected to dump truck loads with respect to burial depths, and this research was performed as foundation study to establish standards for managing buried pipes. The analyses were performed with burial depth of 0.6, 1.2, 1.8m and vehicle velocity of 10km/h. From theses analyses, the vibration velocity and occurred stress tend to decrease as a burial depth increases.

• Journal of the Korean Society of Industry Convergence
• /
• v.7 no.1
• /
• pp.47-53
• /
• 2004

양방향 2차로 도로에서는 보다 효율적으로 운영하고 도로의 안전성을 도모하기 위하여 오르막 차로 및 양보차로 추월차로 등의 부가차로를 설치하고 있다. 이러한 부가차로 효율성의 비교 분석을 통한 연구에 의하여 기존의 도로를 효율적으로 운영하는 방안이 제시되어야 된다. 본 연구에서는 이러한 부가차로 중 추월차로 및 양보차로가 포함된 구간을 조사하여 기하구조에 따른 교통류 특성을 분석하고 각 구간별로 서비스 수준분석을 실시하였다. 그 결과는 다음과 같다. (1) 각 기하구조별로 지점속도와 통행속도를 분석한 결과 지점속도는 통행속도보다 조사지점의 기하구조에 의한 영향을 많이 받아 변동이 심한 것을 알 수 있었으며, 통행속도는 그 기하구조에 따른 교통류의 특성을 잘 반영하고 있음을 알 수 있었다. (2) 차량별 지점속도의 비교 분석에서는 현재 차량성능의 진보로 인하여 조사구간의 설계속도에 반해 중차량 및 버스-트럭, 승용에 대한 차량별 속도차이가 거의 없는 것으로 분석되었다. 기존의 중차량에 대한 보정은 현장제한속도에 대하여 감안되어야 된다고 판단된다. (3) 모의실험모형과 현장조사에 의한 교통류특성을 비교해 보았을 때, 시뮬레이션은 도로의 전구간에 대한 결과는 잘 반영하고 있으나 짧은 구간에 대하여 교통류의 연속성을 파악하기에는 부족하다고 판단된다. (4) 추월가능 구간과 양보차로구간의 효율성을 비교해 보면, 추월율에서 양보차로구간이 추월가능구간보다 22.5%나 높게 나왔으며 총지체비교에서는 추월가능구간보다 5.56sec/h의 지체감소를 보이고 있다. 서비스 수준분석에서는 같은 C의 수준을 보이고 있으나 양보차로의 영향으로 양보차로 후구간의 서비스 수준이 A까지 상향되었다. 따라서 대향교통류의 영향을 받는 추월차로의 확보보다는 효율성이 좋은 양보차로구간의 보급이 많아야 되겠다.

• Journal of Korea Port Economic Association
• /
• v.28 no.3
• /
• pp.215-234
• /
• 2012

Since ports play a role of gateway to the sea and hinterlands, it is essential to analyse the networks of shipping and inland when evaluating the function and development of a port. The container port of Gwangyang, starting to operate its facilities in 1998, has developed itself as a hub port. Using the data of shipping schedules of Korean ports and the measurement of centrality in sociology, this study analyses the process of world-wide shipping network expansion in Gwangyang and concludes some implications including earlier development of shipping networks due to incentives to shipping companies. Although Gwangyang port also has been expanding its inland network through developing trucking, railway transport, and coastal shipping, it has weakness in inland network as in the cases of interruption in 2004, resumption in 2009 and re-interruption in 2012 at coastal shipping. In 2000s the expansion of shipping and inland networks at the newly built container ports such as Pyungtaek, Ulsan, and Gunsan has enticed the competition among Korean ports at each hinterland. Nevertheless, the operation of Gwangyang container port is considered to affect indirectly the relocation of some manufacturers including Samsung Electronics. Studies on interrelation between development of container port and geographical demography of manufacturers are needed to assess the effects of container port on regional economy.