• Proceedings of the KAIS Fall Conference
• /
• 2006.11a
• /
• pp.76-79
• /
• 2006

세라믹 재료에 대한 트라이볼로지 특성은 기계장치의 실 링, 펌프부품, 미터 계 부품 등에 이용할 때 매우 중요하다. 본 연구에서는 각기 순도가 다른 알루미나와 지르코니아를 기계적 및 트라이볼로지적 특성에 미치는 영향을 고찰 하였다. 실험은 미끄럼거리와 미끄럼 속도, 그리고 마모량과 마찰계수 등을 서로 다른 순도에 따라 측정한 결과 알루미나의 순도 99.7%가 마찰계수와 마모 저항성이 매우 좋은 특성을 얻었으나, 지르코니아의 순도 95%는 상대적으로 마모량이 가장 크게 나타났다.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2004.11a
• /
• pp.296-300
• /
• 2004

Currently. the study on structural ceramic helps to suggest the precise data of friction and wear in accordance with the various conditions in operations. Also, the study helps to predict effective operating conditions by monitoring the occurrence of wear transition. The studies in the Past were mainly concentrated in using identical materials. However, it is highly likely to have unqualified data from the differences of mechanical and chemical properties between ceramic materials. Thus, in this study, through conducting the ball-on-disk type wear testing, the different ceramic materials has been used to consider tribological characteristics between different ceramic materials. We conducted the wear test by using three kinds of specimen which are zirconia, alumina and silicon carbide against zirconia. We have changed the sliding velocity and the loading conditions in this test and found out that there is row friction coefficient and wear rate in the combination of zirconia and silicon carbide.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.5
• /
• pp.91-96
• /
• 2006

The friction and wear properties of ceramics are very important in the applications to engineering ceramic parts such as seal rings, pump parts, automobile meter parts, and so on. In this study, the effects of each other purity on the mechanical and tribological properties of purity zirconia ceramics were investigated. Also in order to determine the effects of sliding distance, sliding speed, contact load, friction coefficient, the amount of worn out material at a certain time, and the prepared composites were measured. Crystalline phases and microstructure were examined with XRD and SEM. The results show that we obtained the good properties of friction coefficient and wear resistance at the purity 99.5% of zirconia. than this of the purity 95% were great at the wear amount of worn out material.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1995.06a
• /
• pp.72-82
• /
• 1995

본 연구에서는 고온 내마모 부품에 사용되는 지르코니아계 세라믹을 이용하여 spray drying법으로 알루미나의 첨가량을 변화시킨 지르코니아-알루미나 복합 분말을 사용하여 플라즈마 용사법에 의해 코팅을 얻었다. 얻어진 코팅의 고온에서의 마모, 마찰 특성의 변화를 살펴보고자 하였다. 마모, 마찰실험은 상온~180$^{\circ}$C까지 수행하였으며 마모전과 후의 변화를 XRD, TEM, SEM 등을 이용하여 관찰하였다.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1999.06a
• /
• pp.86-91
• /
• 1999

High temperature wear behavior of plasma sprayed zirconia based coating with

• Tribology and Lubricants
• /
• v.29 no.4
• /
• pp.235-241
• /
• 2013

The tribological characteristics of dental metal alloys and zirconia were studied by carrying out a friction and wear performance test. In this study, a pin-on-disk-type tester was used and dead weight was employed as the normal load applied to the test specimen. The friction coefficient of dental metal alloys was investigated in terms of their weight and sliding velocity. Microscopic observations were carried out on worn surfaces of specimens. The results indicated that among all metal alloys, Super-A had the highest friction coefficient. Super-A had the lowest amount of wear among all metal alloys, and the amount of wear increased in the following order: Crown & Bridge, Porcelain, and Partial. Crown & Bridge had the best friction coefficient, but the hardness of Crown & Bridge was lower than that of Porcelain and Partial. Experimental measurement results indicated that the disk weight before and after the experiment was the same.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1998.10a
• /
• pp.265-271
• /
• 1998

High temperature wear behavior of plasma sprayed zirconia based coating sealing with zirconia sol were investigated for high temperature wear resistance application. The zirconia powders containing 2.5, 5.0, 7.5, 10.0 mol% of MoS$_2$, $Fe_2O_3$ for plasma spray were made by spray drying method. As-sprayed coating was sealed by zirconia-sol to fill up the pore and crack in coating. wear test were performed at temperature ranges from room temperature to 600$\circ$C. The microstructural changes of before and after sealing process were examined by SEM, XRD and EPMA. After sealing process, the porosity was decreased and micro-hardness was increased. The wear properties of coating after sealing process were improved by sealing of pores and cracks. The behavior of wear amount and coefficient of friction were same tendency to before sealing process.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1993.04a
• /
• pp.70-79
• /
• 1993

세라믹은 금속에 비해서 밀도가 낮고, 내마멸성이 우수하고, 열팽창계수가 작고, 높은 온도범위에 걸쳐서 안정성과 경도를 유지함으로 기계구조용재료로서 유망시 되고 있다. 앞으로 세라믹부품에 대한 수요는 더욱 증가하리라고 예상하고 있으며, 세라믹의 응용이 시도되고 있는 부품은 더욱 다양화되어가고 있는 추세이다. 그러나, 세라믹재료에 관한 신뢰할만한 데이터베이스는 확립되지 못한 상태이고, 트라이보시스템에 관한 수명예측과 설계를 위한 기초 자료도 확립하지 못한 상태에 있다. 세라믹재료에 관한 수명예측과 설계를 위해서는 세라믹재료의 트라이보시스템(tribosystem)에서의 마멸기구의 규명과 마멸율을 평가할 수 있는 마멸식을 구하는 것이 가장 기본적인 과제라 할 수 잇다. 따라서 본 연구에서는 최신 기법에 의해서 제조된 HIP제 질화규소와 지르코니아를 실험재료로 하여 무윤활하에서의 미끄럼 마찰$\cdot$마멸실험을 수행하여 마찰$\cdot$마멸특성을 규명하고, SEM을 이용한 마멸면의 미시적 관찰을 통해서 세라믹의 마멸기구를 조사하여 세라믹마멸기구의 마멸모델을 제히하고자 한다. 제시된 마멸모델에 파괴역학을 도입하여 이론해석과 고찰을 수행하여 보다 실용적인 세라믹의 마멸율을 평가할 수 있는 새료운 무차원파라메타를 제안하고자 한다.

• Tribology and Lubricants
• /
• v.16 no.2
• /
• pp.84-90
• /
• 2000

High Temperature wear behavior of plasma sprayed zirconia coatings containing up to 10 mol% of Fe$_2$O$_3$ were investigated. The wear test results showed that the addition of Fe$_2$O$_3$ particles to zirconia improved the wear resistance and lowered the coefficient of friction. Optimum concentration of Fe$_2$O$_3$ was about 5 mol%. Similar degradation behavior was observed at about 40$0^{\circ}C$ for both zirconia and Fe$_2$O$_3$ added zirconia coatings. The results indicated that stabilization of tetragonal phase and changes in mechanical properties such as hardness and toughness were responsible for tribological behavior of plasma sprayed zirconia contain Fe$_2$O$_3$.

• Tribology and Lubricants
• /
• v.12 no.3
• /
• pp.33-38
• /
• 1996

High temperature wear behaviors of plasma-sprayed ZrO$_{2}$-$Y_{2}O_{3}$ composite coatings were investigated for high temperature wear resistance applications. The composite powders containing 20, 50, 80 vol% of alumina for plasma spray were made by spray drying method. Wear tests with composite coated specimens were performed at temperature ranges from room temperature to 800$^{\circ}$C. Wear tests were also carried out with heat treated specimens at room temperature. The microstructural change of coatings and the worn surface were examined by SEM and XRD. Sharp increase of wear loss at high temperature wear test was observed in specimens containing 50 and 80 vol% alumina. Similar trend was observed in the heat treated coatings. The measured residual stress was increased with increased alumina contents and heat treating temperatures. Residual stress induced during heat treatment appeared to be responsible to the observed harmful effect of alumina additions on the high temperature wear.