• Journal of the Korean Society of Food Culture
• /
• v.2 no.2
• /
• pp.163-167
• /
• 1987

To determine and improve the holding machinery for the productin of convenient food (Dosirak) making Compnay in Seoul and Kyeongkido, a survey was conducted of 16 relative companys in 1986. The majority of the holding machinery are composed to work table, sink, rice cooker and fryer. It is necessary that the machinery are reinforced like packaging machine, air cleaner, cold and refrigeration room, sanitary arrangements.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2005.11a
• /
• pp.201-206
• /
• 2005

The effect of internal liquid flow on spray plume characteristics was performed experimentally in subsonic crossflows. The injector internal flow was classified as three modes such as a normal, cavitation, and hydraulic flip. The objectives of the research are to investigate the effect of internal liquid flow on the spray plume characteristics and compare the trajectory of spray plume with previous works. The results suggest that the trajectory of spray plume can be correlated as a function of liquid/air momentum flux ratio(q), injector diameter and normalized distance from the injector exit(x/d). It's also found that the injector internal turbulence influences the spray plume characteristics significantly.

• Journal of ILASS-Korea
• /
• v.12 no.2
• /
• pp.115-122
• /
• 2007

The spray characteristics and drop size measurements have been experimentally studied in liquid jets injected into subsonic crossflow. With water as fuel injection velocity, injection angle and atomize. internal flows were varied to provide of jet operation conditions. The injector internal flow was classified as three modes such as a non-cavitation flow, cavitation, and hydraulic flip flows. Pulsed Shadowgraph Photography measurement was used to determine the spatial distribution of the spray droplet diameter in a subsonic crossflow of air. And this study also obtains the SMD (Sauter Mean Diameters) distribution by using Planar Liquid Laser Induced Fluorescence technique. The objectives of this research are get a droplet distributions and drop size measurements of each condition and compare with the other flow effects. As the result, This research has been showned that droplet size were spatially dependent on air-stream velocity, fuel injection velocity, injection angle effects, and normalized distance from the injector exit length(x/d, y/d). There are also different droplet size characteristics between cavitation, hydraulic flip and the non-cavitation flows.

• Korean Journal of Agricultural Science
• /
• v.42 no.4
• /
• pp.439-446
• /
• 2015

Kimbugak is one of Korea's traditional snacks made of laver. This study was conducted to investigate the physical drying and frying characteristics of kimbugaks made by a pasting & garnishing machine. The drying and frying characteristics should be analyzed to develop a continuous operation system for manufacturing kimbugak because kimbugak has a high moisture content after pasting process. Materials for pasting and garnishing on laver were rice gruel and sesame. The aluminum shelf with square hole was selected as a drying shelf. The recommended size of the square hole type was $1.5mm{\times}1.5mm$ because characteristics of deformation and easy separation from the shelf were excellent at the hole size. The drying time of 2 hours was also recommended with the drying temperature of $70^{\circ}C$ based on the test results such as dried condition (good), moisture conten t (3.7%), deformation (12.1 mm), and shrinkage rate (19.8%). As the frying conditions for dried kimbugaks, recommended oil temperature and frying time were $170^{\circ}C$, 15 seconds, respectively when corn oil was used. In the case of frying for undried kimbugaks, recommended oil temperature and frying time were $210^{\circ}C$, 2 - 3 minutes, respectively for improvement of work efficiency.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.2
• /
• pp.256-260
• /
• 2001

This study was carried out to investigate effect of ultrasonic treatment on the quality of frying chicken meat. Moisture content of ultrasonic treated leg meat was lowest to 59.7%, moisture content of breast meat was higher than leg meat and protein content of control was higher than ultrasonic treatment. Fat content of ultrasonic treatment was higher than control and leg meat was higher than breast meat. Hunter's L (lightness) and a (redness)-value was not different between frying methods, but L-value of breast meat and a-value of leg meat was higher than leg and breast meat, respectively. Hunter's b (yellowness)-value was not different among frying chicken meats. Frying loss of ultrasonic treatment was significantly lower than control, water holding capacity was higher than control. VBN content of ultrasonic treatment was comparatively higher than control, TBA number of ultrasonic treatment was highest to 0.78mg malonaldehyde/kg. Hardness, springiness and cohesiveness of frying chicken meat was not different between frying methods, but difference of chicken muscle parts were significantly showed. Chewiness was not different among frying chicken meats and shear force value of control breast meat was lowest to 1.9kg. In case of sensory score, aroma and taste of frying chicken meat were out different between frying methods, but texture, juiciness and palatability of ultrasonic treatment were higher than control and that of breast meat were higher than leg meat.

• Journal of environmental and Sanitary engineering
• /
• v.4 no.1 s.6
• /
• pp.29-36
• /
• 1989

The purpose of this investigation was performed for chemical values related to rancidity of fat and oils extracted from deep-frying food in Seoul. The samples were collected according to kinds of fat and oils, sampling sites and food stuffs for frying. The results were as follows 1. The most used frying oils were rice bran oil $(37.0\%)$ and shortening $(29.6\%)$, followed by rapeseed oil $(14.8\%)$. 2. The chemical values related to rancidity of fat and oils extracted from deep-frying foods were the next on average. Acid value-1.42, peoxide value-39.82, dinitrophenyl hydrazine value-16.73 thiobarbituric acid value-0.263. However the highest value among oils was showed in rice bran oil and the lowest value was shortening. 3. For the classification of sampling sites, acid value and peroxide value of samples of the markets were found higher than them of environs of school and roadside, and the differences between them were significant (P> 0.01), while dinitrophenyl hydrazine value and thiobar bituric acid value were not showed the significant differences. 4. For the classification of foodstuffs for frying, there were not recognized significant differences among all kinds of them.

• Korean journal of food and cookery science
• /
• v.8 no.3
• /
• pp.297-307
• /
• 1992

This study has investigated a scientific approach to the manufacture of Yackwa, made by different frying conditions and has assessed texture characteristics through sensory evaluation and instrumental test. A standard Yackwa was made by frying at 150$^{\circ}C$ for 8 minutes and then soaking for 10 minutes in the newly developed syrup whose viscosity and sweetness were similar to expensive honey. The mixing ratio of the developed syrup was corn syrup: sugar: dextrose=32 : 1.5 : 1 (by weight), and me syrup was double-boned in a water bath for 20 minutes and men cooled to 25 C. As me results of sensory evaluation and instrumental test for Yackwa made by various frying conditions, the lower the frying temperature or me longer the frying time was the higher values of hardness and fracturability, while adhesiveness was the lower in almost all conditions. In the sensory evaluation of Yackwa with the similar outer color, mere were significant differences in me inner color, Crispiness and levels of rising and cracking.

• Journal of the Korean Home Economics Association
• /
• v.24 no.4
• /
• pp.75-84
• /
• 1986

The followings are the results of the study on decomposition of oil during the process of frying hot-dogs with soybean oil. First, the oil was heated repeatedly for six days, four hours two session per day. Then the oil was observed when heated under identical condition except for the exclusion of the frying ingredients. And the oil itself was heated constantly for a period of 48 hours. 1. The AV and Carbonyl Value of all frying oils increased with each use (but the oil in which frying ingredients with all other oils) 2. All frying oils showed a tendency to increase initially, then decrease their POV and TBA Number during their heating process. 3. The IV of all oils showed a slight decrease except for oil with frying ingredients added, with showed a substantial decrease. 4. Oil with frying ingredients showed a substantial increase in its oxidized fatty acid level, and others showed a tendency to increase according to the frying time. Decomposition of soybe an oil during the process of frying hot-dogs was studied. Three treatment was performed first, the oil was heated (with hot-dogs) repeatedly four hours in each session, two sessions per day for six days. Second, the oil was heated without hot-dogs under identical condition, Third, the oil was heated constantly for 48 hours.

• Journal of the East Asian Society of Dietary Life
• /
• v.27 no.3
• /
• pp.243-256
• /
• 2017

This study attempted to improve frying powder products based on 272 consumers' purchase conditions. Factor analysis by type was conducted on purchase attributes of consumers who purchased frying powder by categorizing them based on five factors-namely, convenience, information, diversity, safety, and economy. Five main factors were divided into four purchase attributes named various pursuit, convenience pursuit, economical pursuit, and inform/safety pursuit. Purchasing status of frying powder products was analyzed according to three independent variables such as age, meal preparation type, and purchase attributes. The top motivation for using frying powder was convenience. According to the importance-satisfaction analysis survey, taste, expiration date, and certification mark were chosen as highly important and high satisfaction characteristics for frying powder (p<0.001), whereas nutrition, oil absorption, adhesiveness, crispiness, origin, and food additives were highly important and low satisfaction characteristics (p<0.001). In the conjoint analysis, crispiness was the most important attribute of fried food.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.320-324
• /
• 2017

Effect of elliptical orifice on the spray characteristics of liquid jet ejecting into subsonic crossflows were experimentally studied. Circular/elliptical plain-orifice injectors, which had different ratios of the orifice length to diameter and major axis to minor axis, were used for transverse injection. Compared with the previous research, breakup lengths of elliptical nozzles are shorter than circular nozzles at all experimental condition. Cavitation/hydraulic flip are considered as a reduction in the breakup length at all circular/elliptical nozzle. In the case of liquid column trajectories, major axis which was placed to the crossflows, increases the frontal area of the liquid column exposed to the crossflows. Hence, the aerodynamic force exerted on the jet is increased and the penetration depth is reduced.