• Journal of Bio-Environment Control
• /
• v.18 no.3
• /
• pp.258-265
• /
• 2009

This research was conducted to compare drymatter production and yield pattern between commercial glasshouse (G) and plastic greenhouse (PG) in Korea. In both greenhouses sawing and plating of sweet pepper was 28 August and 27 September, 2007. Destructive measurement and yield of sweet pepper, cv. 'Derby', was obtained from January to May, 2008. Averaged light transmissivity over 20 times observed 65% in G and 51 % in PG. The averaged daily radiation sum of greenhouses during whole growing period was $9.03MJ/m^2/day$ for G and $7.37MJ/m^2/day$ for PG Leaf area index (LAI) in G crop was 36% higher than the crop in PG at the end of experiment (247days after planting: DAP), whereas there was no significantly difference for 212 DAP in both greenhouses. Total dry matter production was $1759.9g{\cdot}m^{-2}$ for G and $1308.5g{\cdot}m^{-2}$ for PG Fruit production observed $14.1kg{\cdot}m^{-2}$ in G and $7.8kg{\cdot}m^{-2}$ in PG. There was slightly difference measurement of dry matter distribution of generative or vegetative parts to total dry matter between G and PG.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.202-202
• /
• 2012

유연성 투명 전도막은 현대 전자산업의 발전에 있어 필수적인 부품소재로서, 가시광선의 투과율이 80% 이상이고 면저항이 $100{\Omega}/sq.$ 전후이며 휘거나 접히고 나아가 두루마리의 형태로도 응용이 가능한 소재를 일컫는다. 이러한 유연성 투명 전도막은 차세대 정보디스플레이 산업 및 유비쿼터스 사회의 중심이 되는 유연성 디스플레이, 터치패널, 발광다이오드, 태양전지 등 매우 다양한 분야에 응용이 기대된다. 이러한 이유로 고 신뢰성 유연성 투명 전도막 개발기술은 차세대 산업에 있어서의 핵심기술로 인식되고 있다. 현재로서는 인듐 주석 산화물(indium tin oxide; ITO) 및 전도성 유기고분자를 사용하여 투명 전도막을 제조하고 있으나, ITO 박막의 경우 인듐 자원의 고갈로 인한 가격상승 및 기판과의 낮은 접착력, 열팽창계수의 차이로 인한 공정상의 문제, 산화물 특유의 취성으로 인한 유연소자로서의 내구성 저하 등의 문제가 제기되고 있다. 전도성 유기고분자의 경우는 낮은 전기전도도와 기계적강도, 유기용매 처리 등의 문제점이 지적되고 있다. 따라서 높은 전기전도도와 투광도 뿐만 아니라 유연성을 지니는 재료의 개발이 요구되고 있는 실정이다. 최근 이러한 재료로서 그래핀(graphene)과 탄소나노튜브(carbon nanotube; CNT)를 중심으로 하는 탄소나노재료가 주목받고 있으며 많은 연구가 활발히 진행되고 있다. 본 연구에서는 열화학기상증착법(thermal vapor deposition; TCVD)으로 합성된 그래핀 및 CNT를 이용하여 탄소나노재료 복합체 기반의 유연성 투명 전도막을 제작하고 그 특성을 평가하였다. 그래핀과 CNT합성을 위한 기판으로는 각각 300 nm 두께의 니켈과 1 nm 철이 증착된 실리콘 웨이퍼를 이용하였으며, 원료가스로는 메탄(CH4)과 아세틸렌(C2H2)등의 탄화수소가스를 이용하였다. 그래핀의 경우 원료가스의 유량, 합성온도, 냉각속도를 변경하여 대면적으로 두께균일도가 높은 그래핀을 합성하였으며, CNT의 경우 합성시간을 변수로 길이 제어합성을 도모하였다. 합성된 그래핀은 식각공정을, CNT는 스프레이 증착공정을 통해 고분자 기판(polyethylene terephthalate; PET) 위에 순차적으로 전사 및 증착하여 탄소나노재료 복합체 기반의 유연성 투명 전도막을 제작하였다. 제작된 탄소나노재료 복합체 기반의 유연성 투명 전도막은 물리적 과부하를 받았을 때 발생할 수 있는 유연성 투명 전도막의 구조적결함에 기인하는 전도성 저하를 보상하는 특징이 있어, 그래핀과 탄소나노튜브 각각으로 제조된 유연성 투명 전도막보다 물리적인 하중이 반복적으로 인가되었을 때 내구성이 향상되는 효과가 있다. 40% 스트레인을 반복적으로 인가하였을 때 그래핀 투명 전도막은 20 사이클 이후에 면저항이 $1-2{\Omega}/sq.$에서 $15{\Omega}/sq.$ 이상으로 급증한 반면 그래핀-CNT 복합체 투명 전도막은 30사이클까지 $1-2{\Omega}/sq.$ 정도의 면저항을 유지하였다.

• Current Research on Agriculture and Life Sciences
• /
• v.16
• /
• pp.84-95
• /
• 1998

Apple Marssonina blotch, caused by Diplocarpon mali, which has been increasing on apple trees and become one of the most serious diseases on apple trees in Korea since the begining of 1990's. In this study, ecology of Marssonina blotch including disease incidence and spore dispersals was surveyed from 1992 to 1995 in Kyungpook, and factors influencing the incidence of the disease were analyzed. Marssonina blotch began to occur on apple leaves in June and was observed commonly in most of apple orchards after August, and increased rapidly in September. The incidence of this disease was high at the year of low temperature and a lot of precipitation. The conidia discharge began to occur in May and continued to October, and the peak period of spore release was in August and usually more than 70% of total spore release of the year released from August to September. The incidence of the disease was high in the northern and mountain are as such as Yeongjoo, Chungsong, Andong, and relatively low in the southern areas such as Kunwi, Yongchon. Jonathan cultivar was the most susceptible to Marssonina blotch, and Jonagold, Sekaiichi was secondly susceptible and the next Fuji was more susceptible than Tsugaru. The incidence of the disease was relatively high in orchards which cultivation management of irrigation, drainage, air circulation, fertilization, and fungicide spraying were poor.

• Korean Journal of Soil Science and Fertilizer
• /
• v.5 no.2
• /
• pp.65-74
• /
• 1972

A local rice variety, Jinheung and newly bred IR667-Suwon 214 were grown in $5m^2$ concret pot with two spacings and two nitrogen levels and their ripening structure and its function were comparatively investigated to elucidate the causes of unusually low ripened grain ratio of IR667 lines. The following differences between two varieties were found. 1. Though IR667 had much lower ripened grain ratio (64%) than Jinheung (85%) grain yield(790 kg/10a) of IR667 was higher than that (760 kg/10a) of Jinheung. 2. Number of ripined grain per net assimiration rate (NAR) at 10 days after heading was a little higher in IR667 (6,490) than in Jinheung (6,360) consiting to lower grain weight ($29.9{\times}10^{-3}g$) in IR667 than $31.2{\times}10^{-3}g$ of Jinheung. But number of total grain per NAR was much higher (10,530) in IR667 than 7,290 of Jinheung indicating that it was the probable cause of low ripened grain ratio of IR667. 3. Extinction coeificient (K) was 0.115 in IR667 and 0.200 in Jinheung, thus IR667 could construct greater ripening structure per unit area. 4. Number of grain per LAI was decreased with increasing LAI at heading and the decreasing rate was similar for both IR667 and Jinheung. 5. Critical leaf area index at which crop growth rata (CGR) is maximum was 6.5 for IR667 and 5.2 for Jinheung. Below 5.2 of LAI net assimilation rate was always higher an Jinheung throughout the growing season. 6. The estimated optimum leaf area index having maximum grain yield was 7.4 for IR667 and 6.2 for Jinheung at 10 days after heading. However, actual leaf area index was 6.2 for IR-667 and 4.7 for Jinheung and these were even below critical leaf area index. 7. The decrease of LAI during ripening period was great in IR667 but photosynthesis per $m^2$ was decreased more rapidly in Jinheung. 8. Net assimilation rate (NAR) decreased with the increase of LAI at any time of ripening period. The decreasing rate of NAR with the increase of LAI was greater in IR667 with ripening. The greater decreasing rate of NAR in IR667 seemed to be attributed to low photosynthetic activity and high respiratory loss due to the requirement of higher optimum temperature of ripening. 9. Grain yield-ripened grain ratio curve showed less contribution of dry matter yield after heading to grain yield in IR667 than in Jinheung due to unfavorable ripening environment(specialy air temperature) indicating that yield of IR667 could most effectively increased through the improvement of ripening environment.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.54 no.4
• /
• pp.390-396
• /
• 2009

To select optimal shade material in paddy soil, growth characteristics and ginsenoside contents were investigated in new cultivar, 'Cheonpoong' of three-year-old ginseng cultured under three kinds of shade materials such as three-layered blue and one-layered black PE (polyethylene) net (TBPN), blue PE sheet (BPSS), and aluminium-coated PE sheet (APSS). The order of light transmission ratio and air temperature by shade materials were BPSS > APSS > TBSB among three shade materials. Average soil water tension in PDC and IDC was 64 mbar (absolute soil moisture, 25%) and 123 mbar (absolute soil moisture, 17%), respectively, and soil water tension in IDC was changed more distinctly than that of PDC by season and shade materials. Yield in PDC was distinctly decreased more than that in IDC because of the increase of discolored-leaf and rusted-root ratio. BPSS and TBPN among three shade materials were the most effective on the increase of yield in PDC and IDC, respectively. Ratio of rusty-colored root showed not significant difference by drainage class and shade materials. Contents of panaxatriol ginsenoside (Rg1, Re and Rf) were decreased in PDC, while it of panaxadiol ginsenoside (Rb1, Rc and Rd) were increased in IDC. Total ginsenoside contents of IDC was distinctly higher than that of PDC, and BPSS showed the highest contents among three shade materials regardless of poorly and imperfectly drainage class.

• Journal of Bio-Environment Control
• /
• v.25 no.4
• /
• pp.249-254
• /
• 2016

This study was carried out to evaluate the efficiency of white shading agent for reduction of greenhouse air temperature and to develop cost-effective cooling strategies for strawberry seedling production during hot seasons. Experiment results showed that solar radiation ($W/m^2$) was reduced by 14~17% and 33~37% for 15% and 35% white wash shading treatments, respectively, in black shading net treatment solar radiation was reduced by 39~44% compared to non-shaded treatment. Measured greenhouse air temperatures in 15% and 35% white wash shading treatments were $38.4^{\circ}C$ and $36.5^{\circ}C$, respectively, whereas in black shading net covered greenhouses air temperature was $35.1^{\circ}C$, thereby 35% and 15% shading treatments showed 3.3 and $1.9^{\circ}C$ higher air temperatures than black net shading treatment. Crown diameter of strawberry plants in black net shading treatment was 7.5mm, and in 15% and 35% white wash shading treatments were 8.6mm and 8.3mm, respectively. Strawberry transplants grown in 35% white wash shading treatment produced the highest above ground fresh weight(7.8g), followed by 15% white wash shading(6.7g) and black net shading treatments(5.8g). Also, both 15% and 35% white wash shading treatments produced higher root fresh weight(4.1g and 4.3g) compare to black net shading treatments(2.7g).