• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.3
• /
• pp.45-56
• /
• 2000

An experimental and numerical investigation was made to examine the characteristics of pontoon type floating breakwaters(FBW) in regular waves. Motion responses of FBW and wave transmission coefficients are observed and compared with the results based on the linear potential theory. The linear potential theory is found to be a successful tool to investigate the characteristics of the floating breakwaters. We confirm that there exists a minimum wave transmission coefficient which is a function of wave-length/beam and beam/draft ratio. As beam/draft ratio increases the value of wave-length/beam ratio where the minimum, wave transmission coefficient occurs increases. Excessive mooring stiffness can deteriorate the performance of the floating breakwaters.

• Membrane Journal
• /
• v.7 no.2
• /
• pp.95-109
• /
• 1997

The effects of varing axial flow rate and solute concentration on the performance of both module sets made by different methods for active layer formation were compared and determined. All experiments were conducted simultaneously at the same transmembrane pressure and energy consumption per membrane area. In every comparative run between the presence of Dean vortices in a helical module and absence of such vortices in a linear module from the first module set, the solution fluxes and permeabilities were higher, and in some cases substantially higher for the vortex flow. With pure water, the permeabilities of both modules from the second module set were different and the flux in a linear module was 150% higher than in the helical module. This explained both module membranes were totally different.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.2 no.1
• /
• pp.50-58
• /
• 1998

Water vapor transmission was tested in water bath controlled by $20^{\cire}C$, 90%RH for T800/AD6005 based composite motor case which made by filament winding method. We detected internal relative humidity of composite motor case by inserting the humidity detector through the head of motor case for the study of humidity transmission through the wall of composite motor case. We found out that this composite material appears the water vapor flux of 2.88${\times}$$10^{-9}$g/$\textrm{m}^2$sec and diffusivity of 7.98${\times}$$10^{-7}$$\textrm{mm}^2$/sec at $20^{\cire}C$, 90%RH water vapor condition.

• Membrane Journal
• /
• v.32 no.1
• /
• pp.74-82
• /
• 2022

The objective of this work was to investigate the gas permeation properties of CO₂ and CH₄ for PEBAX^®/TS-530 hybrid membranes and compare with pure PEBAX^®-1657 membrane. With FTIR and XRD it was possible to confirm that TS-530 was dispersed well in PEBAX^® matrix. Compared with pure PEBAX^® membrane, ideal separation factor for PEBAX^®/TS-530 (10 wt%) hybrid membrane was enhanced a little. As the amount of TS-530 was increased, the gas permeability coefficients of both CO₂ and CH₄ were increased, while the ideal separation factor was decreased. This results were explained by the reduction of crystallinity of polyamide block and interchain distance caused by introduction of inorganic nanoparticles. And fumed silica might tend to agglomerate, resulting in forming nonselective nanogaps in the hybrid materials, thus the diffusivity would be enhanced at the expense of diffusivity selectivity.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1996.04a
• /
• pp.271-271
• /
• 1996

PG의 농도가 AM의 경피투과에 미치는 영향은 용해도곡선과 유수분배곡선의 교점인 40% 농도에서 투과극대를 보였다. 지방산 및 지방산 알코올의 촉진효과는 리놀레인산＞올에인산＞올레일알코올＞ DHA=EPA=라우린산의 순이었고 PG에 리놀레인산 또는 올레인산을 첨가한 경우는 PG 단독에 비해 129.9 및 43.0배의 투과를 나타냈다. 또, 리놀레인산의 농도증가 (2,5,10%)에 따라 피부/매질 간의 분배계수가 가장 큰 5% 농도의 리놀레인산을 사용했을 때 투과효과가 최대로 나타났다. 한편, AM의 농도증가에 따른 투과효과에 있어서는 포화용해상태인 2% 약물농도에서 투과 flux가 가장 컸다. 라우릴황산타트륨의 첨가는 유의성 있는 효과를 발현하지 못했고 지방산과 병용시에도 지방산 단독 사용시에 비해 오히려 투과를 감소시켰다. 종차에 따른 AM의 피부투과에 있어서는 리놀레인산을 투과촉진제로 사용한 결과 흰주와 무모마우스의 투과 flux가 각각 23.78 및 213.29 $\mu\textrm{g}$/$\textrm{cm}^2$/hr로 무모마우스가 8.97배 높았다. 흰주의 추출액 및 호모지네이트 중에서의 AM의 대사에 있어서는 겉보기 1차 분해속도정수가 표피측추출액, 장막측추출액, 호모지네이트에서 각각 0.0105, 0.572 및 6.153$hr^{-1}$로 호모지네이트 중의 분해속도가 가장 빨라 AM은 피부투과 중에 가장 많이 분해됨을 알았다.

• Food Science and Preservation
• /
• v.6 no.4
• /
• pp.424-428
• /
• 1999

The performance of a 30K polysulfone membrane for clarification of depectinized peach juice was studied Ultrafiltration of peach juice could minimize to loss of flavor and many compounds and was expected to effectively remove precipitation and suspended solid. The results showed that permeate flux increased with the increase of operating pressure and temperature. The permeate flux declined continuously as the process time increased. The values of soluble solid and titratable acidity of permeate were decreased or were at the same level, the turbidity was largely decreased. Total resistance decreased with lower temperature and lower pressure.

• Korean Journal of Optics and Photonics
• /
• v.21 no.4
• /
• pp.161-167
• /
• 2010

We suggest an effective expression of transmission coefficients between uniaxial anisotropic media. To study the transmission of oblique incident light by stratified anisotropic planar structures, we included an imaginary isotropic layer sandwiched between those anisotropic media, and then considered multiple reflection within the imaginary layer. The adequacy of this expression is confirmed by comparing the polarization analysis of light passing through the anisotropic medium and the multi.layered anisotropic media.

• Membrane Journal
• /
• v.13 no.3
• /
• pp.154-161
• /
• 2003

We measured the permeation characteristics of water with the hydrophobic PTFE membranes dependent on water temperature to confirm the separation of oxygen isotopes using Air Gap Membrane Distillation (AGMD) and Vacuum Enhanced Membrane Distillation (VEMD). Isotopic concentrations of $H_2^{16}O$ and $H_2^{18}O$ of the permeated water vapor were measured by Diode Laser Absorption Spectroscopy. Concentrations of the heavy oxygen isotopes in the permeated water vapor were decreased. Isotope separation coefficients for the hydrophobic PTFE membranes were 1.004∼1.01 depending on the experimental conditions. We observed the effects of air in membrane pores on the oxygen isotope separation. Isotope separation coefficients for the hydrophobic PTFE membranes without air in pores are higher than those for the membrane with air in pores.

• Progress in Medical Physics
• /
• v.8 no.2
• /
• pp.3-17
• /
• 1997

Because a wedged beam consists of attenuated primary photons and scattered radiations from wedge, the spectrum of the wedged beam does not coincide with that of an open beam with same geometry. The aims of current report are to get exact information about whether effects of 15-60$^{\circ}$ wedge for 4 -10 MV photon beams should be considered for dose calculation or not, and to suggest a reference condition for measurement of wedge transmission factor. Percent depth dose of both open and wedged fields with angles of 15, 30, 45, 60$^{\circ}$ for beams of 4 MV(Clinac 4/100, Varian), two 6 MV(Clinac 6/100 and Clinac 2100C, Varian), 10 MV(Clinac 2100C, Varian) X-rays were measured to 30cm deep in water using ionization chambers. Hardening factors of photon beams were calculated with measured PDDs. Both field size factors and transmission factors of wedge filters were measured at d$_{max}$ in water. Beam hardening factors of wedged fields of 4 and 6 MV X-ray were larger than 1 for all wedge angles, field sizes and depths deeper than d$_{max}$ Beam hardening factors for wedge angles 15, 30, 45, 60$^{\circ}$ for 10$\times$10cm were respectively 1.010, 1.014, 1.023 and 1.034 for 4MV X-ray, 1.005, 1.008, 1.019, and 1.024 for 6MV X-ray of Clinac 6/100, 1.011, 1.021, 1.032, 1.036 for 6MV X-ray of Clinac 2100C, and 1.008, 1.012, 1.012 and 1.012 for 10MV X-ray. Beam hardening factors of 10MV X-ray were 1 within 1.2％ difference for all wedge angles, depths and field sizes. It was made clear that for 6MV X-rays, the beam hardening factor depends on treatment machine. The relationship of the factor and depth was linear. Field size factor at d$_{max}$ was independent of wedge angle except for the field of 15$\times$15cm. and maximum difference of the field size factors for the field size was 1.4％ for 4MV X-ray. When the wedge factor is determined, dependence of the factor on field size is negligible at d$_{max}$ but should be considered at deeper depth. Calculating dose distribution or MU, the beam hardening factor should be applied for 4~6MV X-ray beams, but might not be considered for 10MV beam. When wedge transmission factor was determined at d$_{max}$ or in air, field size factors for open field are also applicable to wedged fields, but otherwise, field size factor for each wedge or wedge factor depending on field size should be applied.

• Membrane Journal
• /
• v.8 no.2
• /
• pp.86-93
• /
• 1998

A permeation apparatus has been devdoped which could make the on-line measurements of both flux and permeate composition. Pervaporative experiment of a single component, i.e. water was performed by using poly(vinyl alcohol) membrane crosslinked with glutaraldehyde to confirm the validity of the apparatus. In the experiment, steady-state permeation was obtained in 15 minutes and the measurement could be completed within 20 minutes. A comparison of the on-line measurement was made with the fluxes measured simultaneously by the conventional method in which the permeates were collected by liquid nitrogen. The on-line measurement by the apparatus showed an excellent agreement with the conventional measurement within a difference of $\pm$2%. From the flux data with operating time, 3 kinds of diffusion coefficients of water $D_{slope}, D_{1/2}$, and $D_t$ were determined, which were also coincident with values in a literature. It was confirmed that accurate measurements of fluxes could be obtained from the apparatus.