• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 2003.08a
• /
• pp.98-102
• /
• 2003

지금까지 실무에서는 경사식 방파제 적정 단면 결정시 피복재 산정 및 설계파에 대한 파력을 산정하여 상치콘크리트 구조물의 안정성을 검토하는 것이 전부였다 하지만 현장에서 발생하는 상황은 더 많은 변수들이 작용하는 것을 보여 주고 있다. 예를 들면 파에 의하여 발생하는 투과파 및 월파로 제체의 내부 및 배면 석재의 이탈이 발생하는 경우는 익히 보아 왔던 일이지만, 반대로 월파가 발생하지 않았는데도 불구하고 제체의 침하와 배면의 석재에 이탈 즉 세굴이 발생하는 경우도 있다. (중략)

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 2003.08a
• /
• pp.76-86
• /
• 2003

부방파제는 파랑에너지가 집중되어 있는 자유수면에서 수면하 20%정도에 부체를 띄워 부체에 의한 반사파와 투과파 및 부체동요에 의한 발산파에 의해 파랑을 제어한다. 부방파제의 장점은 무엇보다 대수심해역에 적합하고, 해수흐름을 방해하지 않아 항내오염을 줄일 수 있을 뿐만 아니라, 지진의 피해를 최소한으로 줄일 수 있고, 연약지반상에서도 쉽게 건설될 수 있다는 점이다. (중략)

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.2094-2097
• /
• 2007

본 연구에서는 사석경사제의 전면부에 불투과성 수중방파제를 설치하여, 불규칙파의 반사에 대한 수치모의와 수리모형실험을 수행하였다. 수치해석 모형에는 Reynolds Averaged Navier-stokes (RANS) 방정식을 지배방정식으로 사용하였고, 난류해석을 위하여 $\kappa-\varepsilon$ 방정식을 사용하였다. 자유수면변위의 정확한 예측을 위하여 VOF 기법을 적용하였다. 수리모형실험은 한양대학교 수리실험실의 조파수로에서 수행되었다. 본 연구에서는 입사파랑으로 불규칙파를 조파하였으며, Bretsch neider-Mistuyasu 스펙트럼을 목표스펙트럼으로 하여 재현하였다. 반사율의 산정에서 입사파와 반사파를 분리하기 위하여 수치모형실험에서는 3점법을 사용하였고, 수리모형실험에서는 2점법을 사용하였다. 수치모의를 통하여 예측된 반사율과 수리모형실험에서 관측한 결과는 서로 잘 일치하였다.

• Journal of Ocean Engineering and Technology
• /
• v.14 no.2
• /
• pp.1-6
• /
• 2000

Wave energy absorption by a flap equipped with a harbor in a water of finite depth is studied. The wave potential is calculated by a hybrid integral equation consisting of Green integral equations associated with Rankine and Kelvin Green functions. The absorbed wave energy is calculated by both the near-field and far-field methods. The present methods can be used for the design of a flap-harbor wave energy absorber since the numerical results by the two methods are in good agreement.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2006.06a
• /
• pp.101-106
• /
• 2006

Digital technology has been applied to marine seismic survey to develop data processing technology and multi-channel marine seismic survey. In result, high-resolution marine seismic survey ended in a success. Surveys are conducted for various purposes using various frequencies of acoustic sources. A low frequency source is used for deeper penetration and a high frequency source is used for higher resolution survey. In this study, a multi-source system was used for multi-channel marine seismic survey to acquire seismic sections of both low and high frequencies. Variations of depth of penetration and resolution would be used to achieve more accurate analysis of formations. In this study, the multi-source system consists of Bubble Pulser (400 Hz) for low frequency source and Sparker (1.5kHz) for high frequency source.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.2
• /
• pp.164-176
• /
• 2008

In order to assess the existing infrastructures, it is required to measure the crack depth of concrete members. This paper considers the surface wave transmission technique to measure the crack depth. In special, we demonstrate the effect of reinforced bar on surface wave propagation and conclude that the surface wave transmission technique has only the minor error by the reinforced bar. In addition, we propose and validate the optimal window size for eliminating various reflection waves from the boundary of members.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.29 no.6
• /
• pp.369-381
• /
• 2017

It has been presumed that highly nonlinear skewed waves frequently observed in a surf zone could significantly influence the transmission behaviour via a porous wave breaker due to its larger inertia force than its nonlinear counterparts of zero skewness [Cnoidal waves]. In this study, in order to confirm this perception, a numerical simulation has been implemented for 6 waves the skewness of that range from 1.02 to 1.032. A numerical simulation are based on the Tool Box called as the ihFoam that has its roots on the OpenFoam. Skewed waves are guided by the shoal of 1:30 slope, and the flow in the porous media are analyzed by adding the additional damping term into the RANS (Reynolds Averaged Navier-Stokes equation). Numerical results show that the highly nonlinear skewed waves are of higher transmitted ratio than its counterparts due to its stronger inertia force. In this study, in order to see whether or not the damping at the porous structure has an effect on the wave celerity, we also derived the dispersive relationships of Nonlinear Shallow Water Eq. [NSW] with damping at the porous structure being accounted. The newly derived dispersive relationships shows that the phase lag between the damping friction and the free surface elevation due to waves significantly influence the wave celerity.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.2175-2178
• /
• 2008

본 연구에서는 전면에 투과성 구조물이 위치한 직립케이슨 및 유공케이슨에 대해 수치모의를 실시하여 케이슨의 형태 및 투과성 구조물의 존재유무에 따른 반사율의 감소효과에 대하여 알아보았다. 수치모의에 사용된 모델은 비압축성 점성유체에 대한 복잡한 자유수면 변위의 표현이 가능한 VOF법을 적용하여 Navier-Stokes 방정식을 보다 정확하게 해석하는 CADMAS-SURF(수치파동수로)를 사용하였다. 상기 구조물에 규칙파를 입사하여 반사율을 산정한 결과 주기에 따라 차이가 있지만, 직립케이슨만이 존재하는 경우에 비해 직립케이슨 전면에 투과성 구조물이 위치한 경우 대략 5%정도의 반사율 감소효과를 얻을 수 있었고 유공케이슨만이 존재하는 경우에 비해 유공케이슨과 투과성 구조물이 조합 된 경우에는 20%이상의 감소효과를 얻을 수 있었다. 따라서, 방파제 전면에 위치한 구조물에 대한 반사파의 피해 감소 및 항만 내부 정온도를 고려한 안벽의 시공이 요구되어 질 경우에 투과성 구조물은 직립케이슨과의 조합보다는 반사율을 상대적으로 크게 감소시킬 수 있는 유공케이슨과의 조합이 적절함을 알 수 있었다.

• The Journal of the Acoustical Society of Korea
• /
• v.26 no.6
• /
• pp.286-292
• /
• 2007

The dominant source of noise in a sea-connected piping system is usually due to a seawater cooling pump which circulates seawater to operate onboard equipments normally, and so its water-borne noise with some tonal frequencies should be reduced using proper silencers. In order to obtain the transmission loss of water-borne noise silencers experimentally the present paper suggests a transfer function technique that acoustic wave in the piping system is decomposed into its incident and transmitted components when the reflection at the termination of the system exists. Good agreement in the interested frequency range with theory and the proposed technique shows the validity of the technique.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.18 no.2
• /
• pp.97-111
• /
• 2006

Using the eigenfunction expansion method, a mathematical model has been developed to calculate the reflection and transmission of regular waves from a multiple-row curtainwall-pile breakwater. In addition, hydraulic model experiments have been conducted with different values of porosities between the piles, drafts of the curtain walls, and distances between the rows of the breakwater. It is found that the reflection and transmission coefficients decrease and increase, respectively, with decreasing relative water depth, but they bounce to increase and decrease, respectively, as the relative water depth decreases further. When either the porosity between the piles or the draft of the curtain wall is changed with other parameters fixed, the relative magnitudes of the reflection and transmission coefficients have been changed, but the general trend remained the same. When the wavelength is the same as the distance between the rows of the breakwater, a rapid change was observed for the reflection and transmission coefficients. A good agreement between the measurement and prediction was also founded for three-row breakwaters.