• Science of Emotion and Sensibility
• /
• v.5 no.4
• /
• pp.59-66
• /
• 2002

This study was proposed as an exploratory study for understanding the biological bases and structures of three personality models: Eysenck's PEN model, Gray's BIS/BAS model, and Costa & McCrae's Five Factor Model, which was chosen as the major descriptive model regardless of its biological bases. Besides, Eysenck's impulsivity scale, IVE, was added to demonstrate the relationship of P and impulsivity. Concerning personality, most previous reports have explored the relationships between P300 and the introversion-extraversion of Eysenck's theory because of its putative biological bases. In the present study, forty-eight undergraduate took four personality batteries (ERQ-R, NEO-Pl-R, BIS/BAS, and IVE). Two types of oddball tasks including different stimulus duration were used to induce ERPs (50ms for task 1, 300ms for task 2). Distributional topographies of correlation coefficients with personality traits and ERP components were drawn, and considered for the consistent interpretation of the personality model structures. Even though all equivalences for extraversion of personality batteries showed similarities for their intra-correlation, their correlations with P3 amplitudes were dissociate. Eysenck's E might not be the proper psychometric measure for elucidating its biological bases. The present study supported the negative relationship of P3 amplitude and extraversion, which is the consensus of previous studies. Neuroticism and Psychoticism showed correlations with the earlier sensory processing components such as N1 and P2. This result might explain the reason why most of studies have failed to find biological connections relating them. Interaction between gender and personality traits should be considered for the interpretation of correlations. Two types of auditory stimulus duration had different sensitivity to personality traits.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.3
• /
• pp.14-26
• /
• 2018

The Biotope Area Ratio (BAR) is a quantitative pre-planning index for sustainable development and an integrated indicator for the balanced development of buildings and outdoor spaces. However, it has been pointed out that there are problems in operations management: errors in area calculation, insufficiency in the underground soil condition and depth, reduction in biotope area after construction, and functional failure as a pre-planning index. To address these problems, this study proposes implementing LIM. Since the weights of the BAR are mainly decided by the underground soil condition and depth with land cover types, the study focused on the terrain and pavements. The model should conform to BIM guidelines and standards provided by government agencies and professional organizations. Thus, the scope and Level Of Detail (LOD) of the model were defined, and the method to build a model with BIM software was developed. An apartment complex on sloping ground was selected as a case study, a 3D terrain modeled, paving libraries created with property information on the BAR, and a LIM model completed for the site. Then the BAR was calculated and construction documents were created with the BAR table and pavement details. As results of the study, it was found that the application of the criteria on the BAR and calculation became accurate, and the efficiency of design tasks was improved by LIM. It also enabled the performance of evidence-based design on the terrain and underground structures. To adopt LIM, it is necessary to create and distribute LIM library manuals or templates, and build library content that comply with KBIMS standards. The government policy must also have practitioners submit BIM models in the certification system. Since it is expected that the criteria on planting types in the BAR will be expanded, further research is needed to build and utilize the information model for planting materials.

• Archives of design research
• /
• v.15 no.4
• /
• pp.57-66
• /
• 2002

With the advanced localization followed by the settlement of the local autonomous systems, every city has faced new realities that it is inevitable to change its environment and image designs which have been uniformly made without consideration of its characteristics. Accordingly, they have failed to effectively achieve the development goal which make them distinctive.. The identity of a city means an image rather than its attribute. It can be drawn only when the city has its own municipality as well as the superiority to others. For Corporate Identity(CI) to function effectively as a comprehensive medium of communication, We should take into consideration all the situations which surround the city. It should be emphasized on the culture and environment oriented image. To do so we first of all have to analyze in detail the current situations and characteristics of the city. Hence, this paper tried to propose the strategies of making the CI which expresses the unique identity and communication of the city applying the CI program which have been used as the way of business management. The creation of the CI of the city takes the following steps. First, find the potentials for the image of the city through the survey of its resources. Second, provide the motive for citizens to actively participate in making plans with a dear vision for the improvement of the city image, physical development and so on. Third, provide with the events and the projects for specialized goods of the city to strengthen the ability of delivering the information, to design the city image and the street environment of the city. Fourth, apply the communication design system to use actively the administration organization, to enhance the citizenship, and to differentiate the city image. To do so, a variety of efforts should be followed to integrate and promote the regional culture, develope the structure and the facility functions of the city connecting those factors effectively. The establishment of the city identity is required a variety of activities to make the environment of the city, and the agreeable residential environment for a better life by differentiating the characteristics the city has.

• Journal of the Korean Geographical Society
• /
• v.41 no.1 s.112
• /
• pp.106-120
• /
• 2006

Natural or man-made disaster has been expected to be one of the potential themes that can integrate human geography and physical geography. Typhoons like Rusa and Maemi caused great loss to insurance companies as well as public sectors. We have implemented a natural disaster management system for a private insurance company to produce better estimation of hazards from high wind as well as calculate vulnerability of damage. Climatic gauge sites and addresses of contract's objects were geo-coded and the pressure values along all the typhoon tracks were vectorized into line objects. National GIS topog raphic maps with scale of 1: 5,000 were updated into base maps and digital elevation model with 30 meter space and land cover maps were used for reflecting roughness of land to wind velocity. All the data are converted to grid coverage with $1km{\times}1km$. Vulnerability curve of Munich Re was ad opted, and preprocessor and postprocessor of wind velocity model was implemented. Overlapping the location of contracts on the grid value coverage can show the relative risk, with given scenario. The wind velocities calculated by the model were compared with observed value (average $R^2=0.68$). The calibration of wind speed models was done by dropping two climatic gauge data, which enhanced $R^2$ values. The comparison of calculated loss with actual historical loss of the insurance company showed both underestimation and overestimation. This system enables the company to have quantitative data for optimizing the re-insurance ratio, to have a plan to allocate enterprise resources and to upgrade the international creditability of the company. A flood model, storm surge model and flash flood model are being added, at last, combined disaster vulnerability will be calculated for a total disaster management system.

• Journal of Science Education
• /
• v.43 no.1
• /
• pp.157-172
• /
• 2019

The purpose of this study is to analyze the influence of number of targets on common knowledge generation and brain activity during the common life science discovery task performance. In this study, 35 preliminary life science teachers participated. This study was intentionally made a block designed for EEG recording. EEGs were collected while subjects were performing common discovery tasks. The sLORETA method and the relative power spectrum analysis method were used to analyze the brain activity difference and the role of activated cortical and subcortical regions according to the degree of difficulty of common discovery task. As a result of the study, in the case of the Theta wave, the activity of the Theta wave was significantly decreased in the frontal lobe and increased in the occipital lobe when the difficult difficulty task was compared with the easy difficulty task. In the case of Alpha wave, the activity of Alpha decreased significantly in the frontal lobe when performing difficult task with difficulty. Beta wave activity decreased significantly in the frontal lobe, parietal lobe, and occipital lobe when performing difficult task. Finally, in the case of Gamma wave, activity of Gamma wave decreased in the frontal lobe and activity increased in the parietal lobe and temporal lobe when performing the difficult difficulty task compared to the task of easy difficulty. The level of difficulty of the commonality discovery task is determined by the cingulate gyrus, the cuneus, the lingual gyrus, the posterior cingulate, the precuneus, and the sub-gyral where it was shown to have an impact. Therefore, the difficulty of the commonality discovery task is the process of integrating the visual information extracted from the image and the location information, comparing the attributes of the objects, selecting the necessary information, visual work memory process of the selected information. It can be said to affect the process of perception.

• Journal of Intelligence and Information Systems
• /
• v.24 no.3
• /
• pp.177-198
• /
• 2018

Recently, as economic property it has become necessary to acquire and utilize the framework for water resource measurement and performance management as the property of water resources changes to hold "public property". To date, the evaluation of water technology has been carried out by feasibility study analysis or technology assessment based on net present value (NPV) or benefit-to-cost (B/C) effect, however it is not yet systemized in terms of valuation models to objectively assess an economic value of technology-based business to receive diffusion and feedback of research outcomes. Therefore, K-water (known as a government-supported public company in Korea) company feels the necessity to establish a technology valuation framework suitable for technical characteristics of water resources fields in charge and verify an exemplified case applied to the technology. The K-water evaluation technology applied to this study, as a public interest goods, can be used as a tool to measure the value and achievement contributed to society and to manage them. Therefore, by calculating the value in which the subject technology contributed to the entire society as a public resource, we make use of it as a basis information for the advertising medium of performance on the influence effect of the benefits or the necessity of cost input, and then secure the legitimacy for large-scale R&D cost input in terms of the characteristics of public technology. Hence, K-water company, one of the public corporation in Korea which deals with public goods of 'water resources', will be able to establish a commercialization strategy for business operation and prepare for a basis for the performance calculation of input R&D cost. In this study, K-water has developed a web-based technology valuation model for public interest type water resources based on the technology evaluation system that is suitable for the characteristics of a technology in water resources fields. In particular, by utilizing the evaluation methodology of the Institute of Advanced Industrial Science and Technology (AIST) in Japan to match the expense items to the expense accounts based on the related benefit items, we proposed the so-called 'K-water's proprietary model' which involves the 'cost-benefit' approach and the FCF (Free Cash Flow), and ultimately led to build a pipeline on the K-water research performance management system and then verify the practical case of a technology related to "desalination". We analyze the embedded design logic and evaluation process of web-based valuation system that reflects characteristics of water resources technology, reference information and database(D/B)-associated logic for each model to calculate public interest-based and profit-based technology values in technology integrated management system. We review the hybrid evaluation module that reflects the quantitative index of the qualitative evaluation indices reflecting the unique characteristics of water resources and the visualized user-interface (UI) of the actual web-based evaluation, which both are appended for calculating the business value based on financial data to the existing web-based technology valuation systems in other fields. K-water's technology valuation model is evaluated by distinguishing between public-interest type and profitable-type water technology. First, evaluation modules in profit-type technology valuation model are designed based on 'profitability of technology'. For example, the technology inventory K-water holds has a number of profit-oriented technologies such as water treatment membranes. On the other hand, the public interest-type technology valuation is designed to evaluate the public-interest oriented technology such as the dam, which reflects the characteristics of public benefits and costs. In order to examine the appropriateness of the cost-benefit based public utility valuation model (i.e. K-water specific technology valuation model) presented in this study, we applied to practical cases from calculation of benefit-to-cost analysis on water resource technology with 20 years of lifetime. In future we will additionally conduct verifying the K-water public utility-based valuation model by each business model which reflects various business environmental characteristics.