• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.572-578
• /
• 2017

Haptic systems help users feel a realistic sensation when they manipulate virtual objects in the remote virtual environment. However, there are communication time delays that may make the haptic system unstable. This paper shows the relationship between communication time delay, properties of a haptic device, and the stability of the haptic system with the first-order hold method in a simulation. The maximum available stiffness of a virtual spring with the first-order hold method is larger than in the zero-order hold method when there is no time delay. However, when the communication time delay is much larger than the sampling time, the maximum available stiffness to guarantee the stability becomes the same, irrespective of the sample-hold methods. Besides, the maximum available stiffness increases in inverse proportion to the communication time delay and in proportional to the damping coefficient of the haptic device.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.11a
• /
• pp.525-529
• /
• 1999

본 논문에서는 고속 FPGA 설계를 위한 논리 수준의 조합회로 합성 알고리듬을 제안한다. 제안 된 알고리듬은 회로의 지연시간을 줄이기 위해 critical path를 분할한 후 분할된 회로를 동시에 수행하는 구조의 회로를 생성한다. MCNC 표준 테스트 회로에 대한 실험에서 제안된 지연시간 최적화 알고리듬이 기존 알고리듬에 비해 지연시간이 평균 33.3 % 감소된 회로를 생성함을 보였다.

• Journal of Korea Multimedia Society
• /
• v.10 no.8
• /
• pp.1039-1051
• /
• 2007

In this paper, a new lip synchronization control method is proposed to achieve very low delay in the video communication. The lip control is so much vital in video communication as delay reduction. In a general way, to control the lip synchronization, both the playtime and capture time calculated from RTP time stamp are used. RTP timestamp is created by stream sender and sent to the receiver along the stream. It is extracted from the received packet by stream receiver to calculate playtime and capture time. In this paper, we propose the method of searching most adjacent corresponding frame of the audio signal, which is assumed to be played with uniform speed. Encoding buffer of stream sender is removed to reduce the buffering delay. Besides, decoder buffer of receiver, which is used to correct the cracked packet, is resulted to process only 3 frames. These mechanisms enable us to achieve ultra low delay less than 100 ms, which is essential to video communication. Through simulations, the proposed method shows below the 100 ms delay and controlled the lip synchronization between audio and video.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.6
• /
• pp.81-91
• /
• 2008

In this study, data collection delay time generated in bus information system is analysed and improvement on system reliability by minimizing the delay time is suggested. To minimize the data collection delay time (call setup time), factors on data collection phase are analyzed. Each connecting time that it occurs from wireless communication during data collection phase, is selected as a main effective variable and a model for selecting an optimum communication point to minimize the effect of data delay time by each connecting time is suggested. In this model, minimization of the point between the time carrying out wireless communication and vehicle moving time, is calculated and the difference between the bus arrival time and information delivered time to the passenger is reduced. The test results for the proposed model in BIS using a CDMA (Code Division Multiple Access) communication show that delay time in real system operation has been improved. The minimum data collection delay time based on optimal communication position leads to the better reliability for Bus Information System. This study can be applied to the selection of optimal communication position and detection position instead of empirical methods.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1995.04a
• /
• pp.19-31
• /
• 1995

본 연구에서는 현재 개발중인 이동통신 교환기 CMS-MX의 성능 분석에 적용될 수 있는 큐잉 네트워크 모형을 제시하고 부과되는 트래픽에 따른 여러가지 지연시간의 분포를 구하는 분석적인 방법을 제시한다. 전체적인 분석은 메시지들이 교환기내의 여러 프로세서 사이를 이동하는 과정을 세마이 마코프 과정으로 단순화시키고, 이 세마이 마코프 체인에서 특정 상태로 전이되는 시간의 분포를 구하는 방식으로 이루어진다. 이 때 각 프로세서에서의 체류시간 분포는 GPH/GPH/1 큐로 근사화하여 구해진다. 본 연구에서 제시되는 방법은 이동통신 교환기를 포함한 일반적인 교환기의 성능 분석 및 일반적인 상황에서의 통신망의 성능분석에 이용될수 있다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.8
• /
• pp.1420-1426
• /
• 2008

This paper derives medium access delay of each AC(Access Category) in a stationary station using inter-departure time of IEEE 802.11e WLAN(Wireless LAN). Inter-departure time of IEEE 802.11e WLAN is obtained using saturation throughput of IEEE 802.11e WLAN which was the topic of our prior work. By using a simple queueing model, we evaluate mean queue length and mean delay for each AC on stationary condition. We calculate performance of each AC using this simple model and validate results using simulation.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2016.01a
• /
• pp.103-104
• /
• 2016

사물 인터넷에서는 대부분의 기기가 와이맥스와 같은 무선 통신을 사용하는데 음영지역이 발생할 경우 펨토셀이 필요하다. 펨토셀은 안전적인 통신을 제공하지만 외부에서 무선 송신을 통해 접근할 수 있어 중간자 공격이 발생하기 쉽다. 강제 지연 인터락 프로토콜은 중간자 공격을 탐지하지만 고정된 지연 시간을 통해 패킷 전송 시간은 일정하다. 본 논문은 평가 함수를 사용하여 동적 지연 시간 결정을 통해 패킷 전달 시간에 대해 감소하는 방법을 제안한다. 이로 인해 제안 기법에서는 지연 시간이 효율적으로 감소하여 전송 속도를 향상한다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.7
• /
• pp.1259-1265
• /
• 2006

In this paper, we propose a combined synthetic algorithm of the logic level for high speed FPGA design. The algorithm divides critical path to reduce delay time and generates a circuit which the divided circuits execute simultaneously. This kernel selection algorithm is made by C-langage of SUN UNIX. We compare this with the existing FlowMap algorithm. This proposed algorithm shows result on 33.3% reduction of delay time by comparison with the existing algorithm.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.174-177
• /
• 2016

Wireless network-on-chip (WNoC) can alleviate critical path problem of existing typical NoCs by integrating radio-frequency module on router. In this paper, core-connection-aware genetic algorithm-based core and WIR mapping methodology at small world WNoC is presented. The methodology could optimize the critical path between cores with heavy communication. The 33% of average latency improvement is achieved compared to random mapping methodology.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.10C
• /
• pp.1370-1377
• /
• 2004

Optimal control gain for time-delay systems is made by an optimal control gain for delay-free systems multiplied by a state transition function for the delay time. The optimal control gain for delay-free systems is obtained by pushing two zeros of the PID controller closely to a larger pole of the second order plant. Thus the optimal tuning of PID controller for time-delay second order system is able to be obtained by calculation for the state transition function.