• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.649-651
• /
• 2014

The Digital Living Network Alliance (DLNA) standard enables easy sharing of multimedia contents in the home network environment. However, with the proliferation of mobile computing devices such as smartphones and tablets, the need for media sharing to expand beyond the boundaries of the home network arose. In this paper, a method for accessing DLNA based home network from the mobile environment is proposed. The proposed method uses mobile Virtual Private Network (VPN), and enables easy access to the resources in the home network from the wireless mobile environment.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.1
• /
• pp.239-245
• /
• 2019

RISC-V is a free and open ISA enabling a new era of processor innovation through open standard collaboration. Born in academia and research, RISC-V ISA delivers a new level of free, extensible software and hardware freedom on architecture, paving the way for the next 50 years of computing design and innovation. In this paper, according to the emergence of RISC-V architecture, we describe the RISC-V processor instruction set constituted by arithmetic logic, memory, branch, control, status register, environment call and break point instructions. Using ModelSim and Quartus-II, 38 instructions of RISC-V has been successfully simulated and synthesized.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.227-230
• /
• 2009

This paper presents an architecture of various devices convergence for ubiquitous network. Integration of a variety of devices be can connect to every kind of device should not be constrained. We construct PLC to UPnP protocol architecture and UPnP Bridge Module for interconnecting Non-IP devices with heterogeneous network interfaces to UPnP devices on UPnP networks.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.8
• /
• pp.19-24
• /
• 2018

The IP Multimedia Subsystem(IMS) is an architectural framework for delivering IP multimedia services to mobile users. In order to guarantee the reliability and Quality of Service(QoS) of a variety of multimedia services, we need a new evolutionary approach that maintains the IMS based signaling platform which can perform the processing of flow through distributed controllers. Software Defined Network(SDN) is an architecture purporting to be distributed, dynamic, cost-effectives as well as adapting and seeking to be suitable for the high-bandwidth, dynamic nature of today's applications. It requires some methods for the control plane to communication with the data plane. One of such mechanisms is OpenFlow which is a prominent standard protocol and interface that is responsible for managing the network resources by using the remote SDN controller. In this paper, we propose a straightforward approach for integrating SDN technology together with the IMS architecture. Therefore we propose and construct a combined architecture model that performs flow processing using OpenFlow via the IMS based signaling platform, which maintains the existing telecom call service. Additionally, we describe some relevant experimentation results from the proposed architecture.

• Journal of Aerospace System Engineering
• /
• v.16 no.5
• /
• pp.49-56
• /
• 2022

S-STEP is a small SAR satellite mission that monitors time-limited emergency targets and military anomalies in areas of interest, achieving the average revisit in less than 30 minutes by deploying a constellation of 32 satellites in low orbit at an altitude of 510 km. The mission operation mode of S-STEP is divided into normal mode, observation mode, communication mode, and orbit maintenance mode. Further,, the attitude control mode is subdivides into initial detumbling, sun pointing, target pointing, ground station pointing, and thrust direction maintenance. Based on the preliminary mission operational scenario and the satellite's characteristics, this study analyzed the attitude control performance during initial detumbling and observation modes. It verifies that each mode's attitude control accuracy requirements within the time allotted by the scenario of the S-STEP achieved.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.2
• /
• pp.205-212
• /
• 2011

The high performance intelligent robots have become to use a lot of sensors, actuators and controllers which are connected via bus-type networks while the point to point connection was widely used in-robot networks of existing robots. The bus topology makes the robot system share data internally and it can also reduce the weight of the robot because of smaller wiring harness. The CAN is one of serial bus communication protocols typically used for in-vehicle networks and now it can also be used for in-robot networks because of its low cost and reliability. A performance evaluation system for this type of networked system is developed to analyze the real-time operation and the reliability of a serial-bus network, and the usefulness of the developed evaluation system is shown by some experiments for a network of many CAN nodes.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.7
• /
• pp.1445-1451
• /
• 2005

Home-Network is an integrated network of the PC and all electric home appliances in the home so that they can communicate with each other. In the 21th century, here are various technology for Home Network environment such as HomePNA, IEEE 1394, Ethernet Lan and Bluetooth. For Home Network construction, generally, the standard series interface 'RS232' is used to make communication possible between electric home appliances. However Home network using RS232 has a problem. That is, All machines have to be connected to each other with RS232 using Point-to-Point mode. In this case, the system becomes complicated because we have to use circuits as much as there are machines and increased expenses. To improve this problem, In this thesis, designed home network using RS422 Multi-drop mode serial communication and controled it with embedded linux system. And connected RS422 with motors and sensors using PIC to make the home network virtual environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.4C
• /
• pp.295-307
• /
• 2002

The IEEE 1394 protocol is a de facto standard in multimedia digital home network. It supports several advanced features such as hot plugging, dynamic network reconfiguration, isochronous transmission and so on. Since the IEEE 1394 was adapted in the field of multimedia service with QoS guarantee, back bone network protocol with reel-time digital instrumentation and control sub networks, and physical layer protocol for real-time middleware such as real-time CORBA, the additional real-time features has been required in device driver implementation because of the necessity of the predictability enhancement. To guarantee the real-time features, the device driver of the IEEE 1394 should support the priority based packet processing and also need a isochronous buffer management mechanism to deal with the periodic isochronous communication. In this paper, we proposed a new software architecture of the IEEE 1394 device driver for supporting the real-time characteristics such as priority based packet processing, priority based scheduling and so on.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.512-516
• /
• 2005

Home-Network is an integrated network of the PC and all electric home appliances in the home so that they can communicate with each other. In the 21th century, here are various technology for home Network environment such as HomePNA, IEEE1394, Ethernet Lan and Bluetooth. For Home Network construction, generally, the standard series interface 'RS232' is used to make communication possible between electric home appliances. However Home network using RS232 has a problem. That is, All machines have to be connected to each other with RS232 using Point-to-Point mode. In this case, the system becomes complicated because we have to use circuits as much as there are machines and increased expenses. To improve this problem, In this thesis, designed home network using RS422 Multi-drop mode serial communication and controled it with embedded linux system. And connected RS422 with motors and sensors using PIC to make the home network virtual environment.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.13 no.6
• /
• pp.85-96
• /
• 2003

Wireless LAM in itself is vulnerable to eavesdropping and modification attack, and thus, IEEE 802.11i and IEEE 802. 1x/1aa have been defined to secure the wireless channel. These protocols accompanied by RADIUS and EAP-TLS provide users of wireless LAM with integrity and confidentiality services, and also they perform authentication and access control of wireless ports. In this paper, we suggest a method to implement accounting session using authentication session of IEEE 802. 1x and accounting state machine is designed with the accounting session. Also, we propose a key exchange mechanism to establish secure channel between stations and an access point. The mechanism is designed to be inter-operable with IEEE 802. 1aa.