• The Transactions of the Korea Information Processing Society
• /
• v.5 no.12
• /
• pp.3047-3062
• /
• 1998

This paper deseribes the desihn and the implementation of the Realtime Transport Protocol(RTP)/ Rdaltime Control Protocol(RTCP) (RFC 1889,1890) that is used to transmit the audio/video data to any destination and to feedback the Quality of Service (QoS) information of the received media data to the sender, in the teleconferencing systems proposed by ITU-T. These protocols are implemented with multi thead technique and run on top of UDP/IP-Multicast through the socket interface as the underlying protocol. The upper layer is impelmented such that in can be accessed by the H245 comference control protocol. The RTP packetizes the digitized audio/video data from the encoder info a fixed format, and multieast to the participants. The RTCP monitors RTP packets and extracts the QoS values from it such as round-trip delay, jiter and packet loss to form RTCP packets and non periokically sends them to the sender site. In this Paper, we also descritx the study of measurement and analysis for QoS factors that observed on performing teleconferencing system over Internet. The results from this experiment is indicate that RTT and Jitter value are acceptable even entwork load is high. However, it appears that packet loss rate is high in daytime and most losses periods have length one or two.

• KIPS Transactions on Computer and Communication Systems
• /
• v.4 no.11
• /
• pp.369-382
• /
• 2015

Energy aware server clusters aim to reduce power consumption at maximum while keeping QoS(quality of service) compared to energy non-aware server clusters. They adjust the power mode of each server in a fixed or variable time interval to activate only the minimum number of servers needed to handle current user requests. Previous studies on energy aware server cluster put efforts to reduce power consumption or heat dissipation, but they do not consider energy efficiency well. In this paper, we propose an energy efficient cluster management method to improve not only performance per watt but also QoS of the existing server power mode control method based on autonomous learning. Our proposed method is to adjust server power mode based on a hybrid approach of autonomous learning method with multi level thresholds and power consumption prediction method. Autonomous learning method with multi level thresholds is applied under normal load situation whereas power consumption prediction method is applied under abnormal load situation. The decision on whether current load is normal or abnormal depends on the ratio of the number of current user requests over the average number of user requests during recent past few minutes. Also, a dynamic shutdown method is additionally applied to shorten the time delay to make servers off. We performed experiments with a cluster of 16 servers using three different kinds of load patterns. The multi-threshold based learning method with prediction and dynamic shutdown shows the best result in terms of normalized QoS and performance per watt (valid responses). For banking load pattern, real load pattern, and virtual load pattern, the numbers of good response per watt in the proposed method increase by 1.66%, 2.9% and 3.84%, respectively, whereas QoS in the proposed method increase by 0.45%, 1.33% and 8.82%, respectively, compared to those in the existing autonomous learning method with single level threshold.

• Fire Science and Engineering
• /
• v.34 no.3
• /
• pp.43-48
• /
• 2020

The purpose of this study is to develop an earth leakage alarm circuit breaker, equipped with a leakage alarming function (JER-E2S, ETECKOREA Co., Korea), and to analyze its characteristics. The developed mechanism is exclusively used for single-phase and 220 V circuits, with a rated current of 32 A, 20 A, 20 A (for restrooms), 16 A, etc. It satisfies all characteristics of existing earth leakage circuit breakers (ELB). If a fire current, which is a resistive leakage current (Igr), flows through an electric line, the device detects the leakage current in real time and warns against the leakage through a blinking LED lamp. Since the developed device displays a tolerance to a capacitative leakage current (Igc) that inevitably occurs in LED lamps, communication devices, etc., it ensures a stable power supply. In addition, the earth leakage alarm circuit breaker protects against power failure due to a momentary ground fault. Therefore, it can supply power without the risk of the circuit breaker malfunctioning due to a momentary ground fault caused by water droplets, leaves, etc. Moreover, with a standby power of less than 0.1 W, the developed earth leakage alarm circuit breaker exhibits a power saving performance that is 3~8 times greater than that of other ELBs. Installation of approximately 10 earth leakage alarm circuit breakers in one apartment household, with an area of 120 ㎡, can save 2~5 kWh per month. Therefore, the developed earth leakage alarm breaker not only satisfies the characteristics of existing earth leakage breakers, but also exhibits outstanding power supply quality since it has the functions of electric fire prevention and malfunction prevention. Therefore, this device can innovatively contribute to electric fire prevention.

• Journal of KIISE:Information Networking
• /
• v.29 no.1
• /
• pp.65-76
• /
• 2002

QoS routing is a routing technique for finding feasible path that satisfies QoS requirements required by application programs. Since QoS routing determines such paths in terms of dynamic network state, it satisfies the requirement of applications and increases the utilization of the network. The overhead is, however, generated by routers to exchange the information of the dynamic state of network. In order to reduce this protocol overhead, a timer based update mechanism is proposed in which router checks the change of the network status periodically and network state information is exchanged if the change is greater than a certain value. Using large update period makes, though, routing performance irresponsive to the parameters which determine the update of the network state of the router. In addition to this, large update period may result in inaccurate network state information at routers and cause resource reservation failure. The resource reservation failure generates additional overhead to cancel the resource reservation of the part of the path. In this paper, we propose mechanisms enhancing the existing network state update policy with respect to these two problems. Performance of the proposed schemes are evaluated through a course of simulation.

• Journal of KIISE:Information Networking
• /
• v.29 no.1
• /
• pp.1-14
• /
• 2002

The most important issue in providing multimedia traffic on a mobile computing environments is to guarantee the mobile host(client) with consistent QoS(Quality of Service). However, the QoS negotiated between the client and network in one cell may not be honored due to client mobility, causing hand-offs between cells. In this paper, a call admission control mechanism is proposed to provide consistent QoS guarantees for multimedia traffics in a mobile computing environment. Each cell can reserve fractional bandwidths for hand-off calls to its adjacent cells. It is important to determine the right amount of reserved bandwidth for hand-off calls because the blocking probability of new calls may increase if the amount of reserved bandwidth is more than necessary. An adaptive bandwidth reservation based on an MPP(Mobility Pattern Profile) and a 2-tier cell structure has been proposed to determine the amount of bandwidth to be reserved in the cell and to control dynamically its amount based on its network condition. We also propose a call admission control based on this bandwidth reservation and "next-cell prediction" scheme using an MPP. In order to evaluate the performance of our call admission control mechanism, we measure the metrics such as the blocking probability of our call admission control mechanism, we measure the metrics such as the blocking probability of new calls, dropping probability of hand-off calls, and bandwidth utilization. The simulation results show that the performance of our mechanism is superior to that of the existing mechanisms such as NR-CAT1, FR-CAT1, and AR-CAT1.

• Journal of Broadcast Engineering
• /
• v.9 no.4 s.25
• /
• pp.411-423
• /
• 2004

In Korea, Eureka-147 DAB (Digital Audio Broadcasting) temporarily decided as the standard system for digital audio broadcasting was evolved into DMB (Digital Multimedia Broadcasting) to complement the technical vulnerability in mobile reception of terrestrial DTV. According to introducing video service in T-DMB (Terrestrial DMB), 'Terrestrial DMB Experimental Broadcasting for Video Service', a national project of the MIC (Ministry of Information and Communication), was done for verifying the possibility of video service via T-DMB. The main objective of the project is computing the effective field strength and coverage for making a plan to build T-DMB broadcasting network and developing transmitting and receiving equipment. In case of digital broadcasting, it is absolutely essential to measure BER (Bit Error Rate) and electric field strength in order to evaluate coverage and quality of received signal. In this paper, we implement an integrated mobile measurement system for T-DMB. For this purpose, we propose efficient data structure and algorithm for BER measurement. By adding GPS (Global Positioning System) and electric field strength measurement parts into BER measurement part, we complete the integrated mobile measurement system, and then verify it by experiments and field tests. The developed system was used in a national project, 'Terrestrial DMB Experimental Broadcasting for Video Service' and measurement results will be used as fundamental data for building T-DMB broadcasting network.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.70-80
• /
• 2020

This study examined the effects of the R&D project managers' leadership on the product development performance. A survey was carried out empirically on a group of 175 experts associated with project management R&D operations in the field of manufacturing, construction engineering, shipbuilding, plant, and IT. The survey results showed that the effects of the R&D project managers' leadership on the product development performance were not significant, and the mediating effects of the project sponsor roles were significant. This means that the leadership of leaders, which requires efficient control and management based on complicated intergroup relationships and roles, is important in a project involving experts from the professional field. This suggests that the efficient leadership of leaders can improve the performance through the cooperation of members in the organization and aggregation of their core competencies in a limited time. Overall, the key results of this study mean that project leaders should play an active mediating role to maximize their leadership and enhance the role of project sponsors. In addition, the mediating role of project sponsors has an effect on the leadership of project managers, affecting the project performance quality.

• Journal of KIISE:Information Networking
• /
• v.30 no.4
• /
• pp.535-544
• /
• 2003

Integrated services networks should guarantee end-to-end delay bounds for real-time applications to provide high quality services. A real-time scheduler is installed on all the output ports to provide such guaranteed service. However, scheduling algorithms studied so far have problems with either network utilization or scalability. Here, network utilization indicates how many real-time sessions can be admitted. In this paper, we propose service curve allocation schemes that result in both high network utilization and scalability in a service curve algorithm. In service curve algorithm, an adopted service curve allocation scheme determines both network utilization and scalability. Contrary to the common belief, we have proved that only a part of a service curve is used to compute deadlines, not the entire curve. From this fact, we propose service curve allocation schemes that result in a constant time for computing deadlines. We through a simulation study that our proposed schemes can achieve better network utilizations than Generalized processor Sharing (GPS) algorithms including the multirate algorithm. To our knowledge, the service curve algorithm adopting our schemes can achieve the widest network utilization among existing scheduling algorithms that have the same scalability.

• Journal of KIISE:Information Networking
• /
• v.37 no.5
• /
• pp.317-326
• /
• 2010

Nowadays, transmission bandwidth for network traffic is increasing and the type is varied such as peer-to-peer (PZP), real-time video, and so on, because distributed computing environment is spread and various network-based applications are developed. However, as PZP traffic occupies much volume among Internet backbone traffics, transmission bandwidth and quality of service(QoS) of other network applications such as web, ftp, and real-time video cannot be guaranteed. In previous research, the port-based technique which checks well-known port number and the Deep Packet Inspection(DPI) technique which checks the payload of packets were suggested for solving the problem of the P2P traffics, however there were difficulties to apply those methods to detection of P2P traffics because P2P applications are not used well-known port number and payload of packets may be encrypted. A proposed algorithm for identifying P2P heavy traffics based on flow transport parameters and behavioral characteristics can solve the problem of the port-based technique and the DPI technique. The focus of this paper is to identify P2P heavy traffic flows rather than all P2P traffics. P2P traffics are consist of two steps i)searching the opposite peer which have some contents ii) downloading the contents from one or more peers. We define P2P flow patterns on these P2P applications' features and then implement the system to classify P2P heavy traffics.

• The KIPS Transactions:PartC
• /
• v.13C no.4 s.107
• /
• pp.427-434
• /
• 2006

Broadband Convergence Network(BcN) is a critical infrastructure to provide wired-and-wireless high-quality multimedia services by converging communication and broadcasting systems, However, there exist possible danger to spread the damage of an intrusion incident within an individual network to the whole network due to the convergence and newly generated threats according to the advent of various services roaming vertically and horizontally. In order to cope with these new threats, we need to analyze the vulnerabilities of BcN in a system architecture aspect and classify them in a systematic way and to make the results to be utilized in preparing proper countermeasures, In this paper, we propose a new classification of vulnerabilities which has been extended from the ITU-T recommendation X.805, which defines the security related architectural elements. This new classification includes system elements to be protected for each service, possible attack strategies, resulting damage and its criticalness, and effective countermeasures. The new classification method is compared with the existing methods of CVE(Common Vulnerabilities and Exposures) and CERT/CC(Computer Emergency Response Team/Coordination Center), and the result of an application to one of typical services, VoIP(Voice over IP) and the development of vulnerability database and its management software tool are presented in the paper. The consequence of the research presented in the paper is expected to contribute to the integration of security knowledge and to the identification of newly required security techniques.