• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.9
• /
• pp.2481-2493
• /
• 1996

A simple iterative design method is presented for the miniaturized dielectric filter with finite transimmission zeros. Circuit-network transformations are used to place transission zeros in the stop band. This method is simple and quick compared with conventional pole-synthesis methods. the design of the coupling EM patternof the filter needs the much computation time because its design is carried out through the field simulatior. In this paper, an efficient implementation technique of coupling circuit parameters is presented. This technique uses a linear mapping function between the circuit parameter domain and EM parameter domain to save the high computational time of EM simulator. A narrow band asymmetric filter with a transmission zero is designed and fiblicated through these technique in 1900 MHz band.

• Journal of Satellite, Information and Communications
• /
• v.12 no.2
• /
• pp.33-37
• /
• 2017

This paper suggests a new reliable push pull converter. The proposed push-pull converter have additional two diodes comparing with conventional push-pull converter. When one of two MOSFETs of the push-pull converter is on state, the other MOSFET is automatically off state due to adding additional diodes. Therefore, the converter is under electric noise environments, the converter avoids short circuit due to turning on of two MOSFETs. In this paper, the suggested converter has been simulated by PLECS software for 100 kHz switching frequency. In simulation, the current of the converter switches increases about 10 % for $20{\mu}sec$ electric noise environments. However, the converter operates very reliably without any short circuit conditions.

• Journal of Digital Convergence
• /
• v.13 no.8
• /
• pp.281-288
• /
• 2015

The container terminals use convergence technology that exchange information for cargo work, using wireless communication between the TOS(Terminal Operations System) and the handling equipments(CC, TC, YT). But if the container cargoes pile up high in the container yard, delayed cargo work and cargo working list information error happen because of communication dead spots(the worker can not receive the information) which wireless communication is disconnected. At this time the driver of the yard tractor(YT) must be able to recognize the communication state. If then, delayed cargo work and cargo working list information errors that occur in the shaded communication area can be avoided, and can process the delayed work due to wireless communication break. In this project, we have built wireless communication environment to increase the efficiency of the loading and unloading operations which the operator can respond actively, when the work is delayed and work orders result in errors. That is, the flow of the wireless communication module has been changed.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.8
• /
• pp.33-44
• /
• 2000

The lightning with high voltage and current can enter the basestations for mobile communication through their antenna. The device which can protect the basestation against the lightning, is surge arrestor. In this paper, the concept, kind, operating mechanism, design and fabrication of surge arrestor were studied. Based on the studied data, variable surge arrestors were designed for the current mobile communication service like a cellular, GSM and PCS and the next generation mobile communication like a IMT-2000. Computer simulation for the prediction of their characteristics and inner structure optimization for the improvement of their electrical characteristics were carried with high frequency 3D structure simulator. Quarter wave short stub surge arrestors for IMT-2000 were fabricated with their final design and then the measurement of electrical characteristics and the lightning test were executed. As a results of measurement, we obtained below 1.05 of VSWR, -0.035 dB of insertion loss, -150 dBc of intermodulation and 7∼ll V of residual voltage.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.10 s.101
• /
• pp.973-981
• /
• 2005

A modified half wavelength loaded line antenna is designed and implemented for mobile terminal applications. The antenna is constructed with a radiating element of half wavelength loaded line structure, dielectric substrate, feeding post and two shorting posts on the experimental PCB. The shorting posts are located at each side of the radiating element and lumped inductance elements are on between each shorting post and ground of PCB. By controlling value of inductors, one can adjust resonant frequency and input impedance respectively. Within inductance value of 12 nH, the antenna can have wide operating range of $1,470\~2,660\;MHz$ and good impedance matching. The measured peak gains are between -0.45 dBi and 2.03 dBi for the operating band.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.9
• /
• pp.814-820
• /
• 2015

In this paper, A high selective dual-band bandpass filter was proposed using a dual-mode ring resonator with two short-circuited stubs. For dual-mode resonance, the ring resonator is directly connected with non-orthogonal feed-lines via coupling capacitors. Two short-circuited stubs which are unequal lengths are simultaneously placed at two corners along the two symmetry plane of the ring resonator in order to obtain dual-band responses. Because the feeding angle perturbated ring resonator of the proposed dual-band bandpass filter has the symmetrical structure, Even/Odd mode analysis can be well applied to extract the scattering parameters and transmission zero frequencies. The proposed dual-band bandpass filter was designed and fabricated for WLAN(Wireless Local Area Network) application of IEEE 802.11n standard. The measured results showed a good agreement with the simulation results, and it should be well applied not only for WLAN applications but also for any other communication systems.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.8
• /
• pp.855-862
• /
• 2003

This paper suggests the PIFA structure modified antenna in which short-circuit plate is located between planar element and ground plane, in order to solve the problem of narrow band of existing internal antenna, PIFA. It is also suggested that internal antenna has the perturbation in the patch to broaden the frequency bandwidth. It is possible that the antenna is installed into the mobile telephone with a low profile condition(h=0.015 λ) to use internally, and acquired desired bandwidth(5.2 %) through double resonance structure, remodeling the PIFA that is already well-known as an internal antenna. This paper investigated how characteristic is affected by the feeding point(Yf, Zf), short strip plate(Zs), short strip width(Ws), perturbation width(w), length(d), short plate height(h), dielectric($\varepsilon$$\_$r/) to be slim type antenna. It is compared with existing PIFA bandwidth, and is suggested pattern as the H.E plane. It is simulated using the Microwave Studio of the CST Inc. based on FIM(Finite Integration Method) method and analyzed antenna characteristic following the variation each parameters. The result proved the practical use of PIFA antenna by comparing the measured and simulated data of the antenna.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1205-1206
• /
• 2007

철도시스템에서 열차운행의 안전성과 효율성은 열차제어시스템에 의해 결정된다. 기존의 열차제어는 일반적으로 궤도회로를 기반으로 이루어졌으나, 궤도회로의 문제점으로 부각되는 단락감도, 유지보수 비용증대 등을 해소하기 위해 궤도회로를 대신할 새로운 방법으로 무선통신기술을 기반으로 하는 새로운 형태의 열차제어로 변화를 서두르고 있다. 그러나 이러한 방식으로의 변화는 중저속구간인 도시철도에서는 일부 실용화를 추진하고 있으나 도시간을 이동하는 철도에서는 유럽에서 개념을 정립하여 시험중에 있다. 따라서 본 논문에서는 현 상황에서 도시간 및 고속용 열차제어에 적용하기 위한 무선통신기술에 대하여 선행검토를 수행한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.931-934
• /
• 2009

본 논문은 $24{\mu}m$ 이하의 미세 폭 및 $30{\mu}m$ 이하의 피치와 같이 미세 패턴을 가진 칩 온 필름(chip-on-film, COF)에 발생한 결함들을 자동으로 검출할 수 있는 시스템을 제안한다. 개발된 검출시스템은 미세 패턴의 COF에서 발생한 개방 (open), 단락 (hard short), mouse bite 및 near short (soft short)과 같은 다양한 결함들을 자동으로 빠르게 검출할 수 있는 기술이 적용되어 있다. 본 논문에서 제안하는 결함 검사 기술의 기본 원리는 미세 패턴내의 결함으로 인해 발생한 저항의 미세 변화를 고주파 공진기 (resonator)를 이용하여 측정 주파수에서 증폭시키고 증폭된 결함 신호와 결함이 없는 경우의 신호와의 전압차를 읽어서 0이 아니면 결함이 있음을 판단한다. 제안된 시스템은 미세 패턴 COF 검사 과정에서 결함들을 신속히 측정할 수 있으므로 불필요한 COF 복사를 위해 소요되는 경비를 줄일 수 있으리라 기대한다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.9
• /
• pp.829-834
• /
• 2009

In this paper, a HediaFLO/GPS/Bluetooth antenna is designed for mobile handset with metallic chassis. It is consisted of two metal plates with 7.6 mm gap, a connection plate and source between two plates. It can be analyzed as U-slot antenna of $0.5\;{\lambda}$, array of shorted patches each application bands. Simulated and measured performance of the proposed antenna show that it has enough possibility to reuse metallic chassis itself as radiator without any additional space for antenna.