• Journal of the Korean Society for Railway
• /
• v.20 no.5
• /
• pp.602-611
• /
• 2017

In railway systems, the exchange of information between running trains and wayside equipment is a very important role in various applications such as position detection and train control. Track circuits have been used as the medium for information transmission between trains and wayside. However, track circuits must be installed continuously along the track on the ground, resulting in an inevitable increase in installation and maintenance costs. One of the most promising solutions to reduce these costs is to mix continuous information transmission (via wireless communication) and discontinuous information transmission (via transponder). In this study, we designed antennas of railway high-speed transponder readers and tags for wireless power transmission, which can be used to transmit information from ground to high-speed trains with a maximum speed of 400km/h. We also verified system performance through computational simulation and prototyping.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.1 s.45
• /
• pp.137-144
• /
• 2007

Advances in networking technology digital media, and codecs have made it possible for the Internet evolves into a Broadband convergence Network (BcN) and provides various services including Voice over Internet Protocol (VoIP) and IPTV over their high-speed IP networks. In order for the Internet to make a profit as traditional Public Switched Telephone Network (PSTN), it must provide high qualify VoIP services. Therefore, real time qualify measurement framework is the most important requisite to provide VoIP service. For this, IETF (Internet Engineering Task Force) defined RTCP-Extended Reports (RTCP-XR) that extend RTCP (Real-Time Transport Protocol Control Protocol). However, procedure and method tot actually VoIP qualify measurement did not recommended nothing but defined item to measure voice quality. Our objective in this paper is to describes a practical measuring framework for end-to-end QoS of switched voice packet in an IP environment. It includes concepts as well as step-by-step procedures for measuring packetized voice streams. It also proposes new formats that extend RTCP-XR's concept.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.12
• /
• pp.85-92
• /
• 2010

There is an authentication method for participants with an encrypted ID and password as a symmetric-key in multilateral video conferencing. It is hard to manage when the security-keys makes many while the transportation processing for the encryption and decryption get complicated when the video conferencing involves a number of participants and the third party as an attackers to gain unauthorized symmetric-key to access video conference which makes a problem less secrecy. This study suggests three ways to enhance security in video conference: first, we present PKI-based X.509 certificate for authenticating the participants of multilateral conferencing and we suggest to encode and decode the video conference media data using a secrecy key created by each of the conference participants; second, a more secured multilateral video conferencing can be expected in a group communication by using the participants secrecy key in creating and distributing group keys, where the group key will be renewed whenever there is change in the group member; and finally, we suggest to encode the RTP payload of the media data before transmission.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.3
• /
• pp.75-87
• /
• 2011

Tactical Data Links are standardized radio communication data links for military armed forces and used to transmit and receive data. Because they are the core elements of achieving information superiority in a NCW environment, various kinds of TDL are used by the Korean armed forces. Operating various types of TDL is very helpful in getting more information; however, at the same time, it is hard to integrate and make them co-operate with other TDLs or C4ISR systems. In this paper, we propose a XML based messaging system to make various types of TDL interoperable in a NCW environment. For the messaging system between TDL and C4ISR systems, we define XML message processing interfaces and suggest binary XML for serialization to save transmission loads over constrained military communication bandwidth. Our experiment results show that the TDL message can be transformed into generalized XML data that is interoperable with other TDLs and binary XML serialization, and it saves parsing and transmission time.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.20 no.1
• /
• pp.69-75
• /
• 2002

The important issues of facility database management in GIS are to collect up-to-date information and to update information in accordance with new-establishment, repair and replacement of the facilities. Therefore, it is necessary to develop a system which has capability of monitoring facilities as well as managing database efficiently. The purpose of this study is to propose possibility of implementation of mobile GIS solution for the facility management. In order to achieve the goal, to process existing digital maps and to receive on-site information through the wireless communication service are required. In addition, the system is required to process spatial information obtained by GPS and digital photogrammetric technique with real-time updating database in server. The system increases efficiency both in work flow and monitoring for facility management by providing optimal routing information to the sites and real-time two-way communication using VoIP(Voice over Internet Protocol). The system is expected to perform real-time database management effectively. In consequence, the system could appropriately response on-site situations in various practical applications. The proposed technology could contribute to improve nation's leading-edge technology.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.16 no.2
• /
• pp.131-137
• /
• 2006

In swarm robot systems, each robot must behaves by itself according to the its states and environments, and if necessary, must cooperates with other robots in order to carry out a given task. Therefore it is essential that each robot has both learning and evolution ability to adapt the dynamic environments. In this paper, the new learning and evolution method based on reinforcement learning having delayed reward ability and distributed genetic algorithms is proposed for behavior learning and evolution of collective autonomous mobile robots. Reinforcement learning having delayed reward is still useful even though when there is no immediate reward. And by distributed genetic algorithm exchanging the chromosome acquired under different environments by communication each robot can improve its behavior ability. Specially, in order to improve the performance of evolution, selective crossover using the characteristic of reinforcement learning is adopted in this paper. we verify the effectiveness of the proposed method by applying it to cooperative search problem.

• KIPS Transactions on Computer and Communication Systems
• /
• v.1 no.3
• /
• pp.171-180
• /
• 2012

In the development of MDMS(Meter Data Management System) based on CIM(Common Information Model), which is international standard in information model and data exchange on power system, the two focused issues are the effective management of data collected in a shorter time period and the way to integrate services supporting legacy system to use the AMI(AMI, Advanced Metering Infrastructure) data. In this paper, we propose MDMS implementation methods and functions in AMI environment which are differ from existing AMR system environments in that the methods support bi-directional service infrastructure. The proposed MDMS in this paper has two unique features, one is the secure of interoperability by utilizing the CIM and ESB, the other is the improvement of field application by implementing system module based on components. On an implementation of smart grid, the result of proposed methods is expected to contribute to the efficient development and operation of CIM-based power system.

• KIPS Transactions on Computer and Communication Systems
• /
• v.1 no.2
• /
• pp.99-102
• /
• 2012

The performance of P2P application services may be improved by reducing unnecessary inter-network traffic through intelligent peer selection. However, since a logical link between peers in a P2P overlay network is composed of a set of physical links in an underlay network, the traffic pattern determined by the sending rates of selected peers imposes loads on each underlay links. Thus, if the sending rates are not determined carefully, the loads between underlay links may not be balanced, which means some links are underloaded while the other links are congested. In this paper, we take an optimization approach to determine the sending rates of peers strategically to avoid the inefficient use of underlay links. The proposed scheme also guarantee the minimum receiving rates of peers while minimizing the maximum link utilization of underlay links, which is beneficial both to P2P applications and an underlay network.

• KIPS Transactions on Computer and Communication Systems
• /
• v.7 no.6
• /
• pp.137-144
• /
• 2018

Vehicular Ad-hoc Networks (VANETS) have enabled to provide a variety of applications such as accident notification, content usage, etc. These applications have spatio-temporal data which have an interesting region and a lifetime according to their properties. However, geocasting protocols to deliver data to an interesting region can provide data to all vehicles in the region through a single transmission only at the current time, but cannot provide data to vehicles passing through the region during the lifetime of the data. Thus, we propose a spatio-temporal geocasting protocol called STGP using a regional caching scheme to send data to vehicles in an interesting region during a data lifetime in VANETs. For efficient and reliable regional caching, the proposed protocol uses the beacon-based data sharing, the extra caching elimination, and the distance-based caching exchange. Simulation results verify that the proposed protocol achieves more reliable and efficient data delivery compared with the existing protocol.

• The Journal of Information Technology
• /
• v.7 no.1
• /
• pp.43-56
• /
• 2004

The purpose of this paper is to study the send and receive of the message in the TEDI System. The TEDI System replaces a series of trade documents with electronic date, and it realizes secure and reliable transactions of data among parties by means of open networks, such as the Internet. The TEDI system is composed of Web browsers, TC Serves, a RSP Server, and Certification Servers. TEDI has development the system and legal frame work. Exporters, importers, carriers, banks insurance and companies those who engage in the trade releated business have tested TEDI system and evaluated the legal frame work from the practical point of view. TEDI is now refining the system and preparing for the service. A fundamental feature of the TEDI System is the attribution to participants of data messages through public key certificates issued by certification authorities that allow for verification of digital signatures. Access to servers maintained by such certification authorities also takes place through the internet. In principle, certificates used by any reputable certification authority may be employed as long as they are compatible with X.509 V3.