• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.97-97
• /
• 2015

최근 몇 년간 발생한 도시홍수 피해의 주요 원인은 배수관망의 통수능 부족 때문이다. 2010년과 2011년에 연이어 발생한 서울시 침수피해의 주된 원인도 통수능 부족이라는 것을 관련된 보고서 등에서 확인할 수 있다. 따라서 현재 진행중이거나 계획중인 주요 침수지구의 '하수관거 종합정비 사업'은 주로 합류식 우수관거의 통수능 확보를 위한 사업으로 진행되고 있다. 하지만 침수지역의 관거 통수능 확보를 위한 관경확대는 관거확대 공사비용, 공사에 따르는 교통정체, 주거지역 시민의 피해, 제한된 공사비 등 여러 측면에서 제한될 수 있다. 배수망의 평면계획은 배수망의 유출반응과 밀접한 관련이 있다. 따라서 이 경우 관경확대 이외의 다른 대안으로 합류식 우수관거의 평면계획을 새로이 검토할 수 있다. 본 연구에서는 여덟 방향 깁스모형을 개발하여 기존의 네 방향 깁스모형과 비교하여 배수관망을 더욱 정확히 표현하도록 하였으며, 개발된 깁스모형을 활용하여 신월지구의 배수망 특성을 분석하였다. 또한 깁스모형을 이용하여 분석한 신월지구의 최적 배수관망 평면계획을 SWMM 모델에 적용하여 기존 배수관망 시스템과 최적 배수관망 시스템의 효율성을 검토하고 도시유역 적용성을 검토하였다. 따라서 본 연구의 결과는 깁스모형의 도시 배수망에의 적용성을 높임과 동시에 배수망의 평면계획을 이용하여 유출량 저감을 도모할 수 있는 새로운 대안을 제시할 수 있을 것으로 기대된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.92-92
• /
• 2016

최근 도시유역의 홍수들이 빈번히 발생하고 있다. 2010년 2011년에는 서울 지역에서 연이은 도시 홍수피해가 발생하였고, 2015년 미국 South Carolina, 프랑스, 중국 지역에서 많은 홍수 피해가 발생 했다. 도시유역에서 홍수피해가 증가하고 있는 주요 원인은 기후변화로 인한 극한 홍수의 증가, 도시화로 인한 불투수면적의 증가, 배수관망의 통수능 부족 등이라 할 수 있다. 본 연구는 앞서 제시한 세가지 원인들 중 불투수면적의 증가 및 배수관망의 통수능 부족 부분에 대하여 기존 연구와는 다른 시각으로 접근하여 도시유역의 홍수유출 저감방안에 대한 연구를 수행하였다. 본 연구에서는 서울의 신월 배수분구를 대상으로 첫 번째 불투수지역들 중 강우발생시 홍수유출에 직접적인 영향 미치는DCIA(Directly Connected Impervious Area)지역과 IIA(Isolated Impervious Area)를 분리하여 홍수유출 특성을 분석하였고, 두 번째는 배수 관망의 통수능 부족 문제를 해결하기 위해서 관망의 통수능을 증가시키는 방법이 아닌 홍수 유출을 저감할 수 있는 적정 배수관망 레이아웃을 산정한 후 이를 SWMM 모형에 적용하여 기존 배수관망 시스템과 적정 배수관망 시스템의 홍수저감량을 비교하였다. 마지막으로는 첫번째 방법과 두 번째 방법을 동시에 적용하였을 때의 홍수저감량을 검토하여 최적의 도시유역의 홍수유출 저감방법을 제시하고자 한다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5C
• /
• pp.313-320
• /
• 2008

The discharge capacity testing apparatus using penetration method, being able to simulate in laboratory the condition of embedding plastic board drains in field, was developed to investigate consolidation characteristics of ground and to figure out discharge capacity of drains. The developed apparatus with a mandrel and penetrating device was designed to insert PBD into the ground prepared by previously applied pressure, being different from the conventional testing method that the drain was installed and the ground material was poured subsequently. Discharge capacity tests with the conventional apparatus as well as the newly developed one were performed to assess the applicability of the latter. As a result of tests, the conventional method showed delayed consolidation due to overall disturbance of ground and local deformation of drain caused by inhomogeneity of ground. Therefore discharge capacity of drain with the conventional apparatus was measured more or less larger than the expected values whereas discharge capacity with new one could be measured similar to the actual value in field.

• Journal of the Korean Geotechnical Society
• /
• v.25 no.8
• /
• pp.33-45
• /
• 2009

The conventional single-core PBDs have been widely used in order to accelerate consolidation settlement of soft grounds. When using the single-core PBD in a thick clay deposit, a delay of consolidation may occur due to high confining pressure in the thick deposit and necking of drains. This study is to compare the performances of soil improvement by the single-core and double-core PBD installed at a site in Busan New Port which exhibits approximately a 40m-thick clay layer. An in-situ test program was performed at the test site where a set of the double-core PBDs and single-core PBDs were installed to compare the efficiency of each drain. In addition, the discharge capacity of each PBD has been measured using the modified Delft Test. A series of laboratory tests for estimating in-situ soil properties have also been performed in order to obtain input parameters for a numerical program ILLICON. The discharge capacity of the double-core PBD is higher than that of the single-core PBD in the modified Delft Test. However it is observed from the comparative in-situ test and numerical analysis that there is no difference in the performance of ground improvement between the two drain systems. This discrepancy comes from the fact that the amount of water released during consolidation in most common field conditions is much smaller than the capacity of even the single core PBD. And thus, considering actual field conditions, it can be concluded that the single-core PBD has enough discharge capacity even in the thick clay deposit such as this test site.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.515-518
• /
• 2006

수많은 교각들이 규칙적으로 배치되어 있는 복개하천이나 하천종단교량 등의 경우 개별적인 교각의 후면부에서 발생하는 와류로 인한 에너지 손실이 누적되어 흐름에 큰 저항요인으로 작용한다. 격자기둥의 형상과 종방향 및 횡방향 배치간격이 배수시스템의 통수능에 미치는 영향을 파악하기 위해 본 연구에서는 사각형 및 둥근장방형 격자기둥에 대한 기초적인 수리 실험을 실시하고 그 결과를 분석하였다.

• Journal of the Korean Geosynthetics Society
• /
• v.17 no.4
• /
• pp.239-249
• /
• 2018

Typically, soft clay improvement is carried out using installation of PVD and surcharge method. According to circumstances, installed PVD has left for a long time due to the change in construction schedule. Therefore, for simulation of this kind of condition, discharge capacity tests were carried out under a series of temperature condition (30, 35, $40^{\circ}C$). The results indicated that under water confinement, the discharge capacities significantly reduced with elapsed time. And, the empirical equation by Miura and Chai (2000) was used for estimating the long-term in-clay discharge capacity. Based on the test results, it is recommended that in term of long-term discharge capacity, Miura and Chai's equation and reliability evaluation using discharge capacity tests under a series of temperature condition may be used.

• Water for future
• /
• v.29 no.4
• /
• pp.223-231
• /
• 1996

For the most efficient operation of water mains, 124 head losses in domestic water supply steel mains were measured to provide the values of friction coefficient and the variable affecting the deterioration rate of Hazen Williams' and Darcy-Weisbach's friction coefficient. The experimental results show that pipe age is governing the friction coefficient of large mains (Diameter > 1100 mm). On the other hands, pipe age and pipe diameter are affecting the variation of carrying capacity for small mains (Diameter < 1100 mm). The friction coefficient of water mains in foreign countries is higher than that in Korea by about 5 to 10 in Hazen Williams' C value. The growing rate of roughness height of domestic water main is about 0.41 mm/year which is higher than the average of United States of America. So further study is required to find out what causes the serious deterioration rate.

• Journal of the Society of Disaster Information
• /
• v.13 no.4
• /
• pp.483-490
• /
• 2017

Recently, the demand for industrial and residental land are increasing with economic growth, but it is difficult to obtain the area for development with good ground condition. Various kinds of vertical drain technologies such as sand drain, sand compaction pile, packed drain, PVD are commercially available to improve the soft ground. Discharge capacity is the important factor of vertical drains. However, under field conditions, discharge capacity is changed with various reasons, such as soil condition, overburden pressure, and so on. In this paper, the experimental study was carried out to estimate the discharge capacity of four different types of PBD, PBD for double core PBD, deep type PBD, X type PBD, general type PBD. Characteristics of the discharge capacity for the surcharge load and hydraulic gradient were analysed. The double core PBD was excellent for discharge capacity in this study.

• Journal of the Korean Geotechnical Society
• /
• v.17 no.5
• /
• pp.83-96
• /
• 2001

선행압밀공법에서 지반으로부터 배출되는 물을 신속히 배수시키기 위해 연약지반상에 수평배수층을 설치한다. 종전의 연구에 의하면(예, Giroud(1981), 한국도로공사(1998)), 배수층의 통수능은 성토하중의 성토기간 또는 압밀속도의 영향을 받으며, 성토기간이 짧을 때에는 과다한 배수능이 요구된다. 이 논문에서는 선행압밀공법에 적용 가능한 새로운 압밀해석방법을 사용하여 소요통수능을 재검토하고 새로운 실용공식을 제안하였다. 전반적인 압밀침하량이 5%이내에서 지연될 때에는 소요통수능은 성토기간의 영향을 받지 않는다는 것을 알게 되었다. 또한 소요통수량은 압축지수, 압밀계수 및 수평배수층의 배수거리의 제곱에 비례한다는 것도 밝혀졌다.

• Journal of the Korean Geosynthetics Society
• /
• v.7 no.2
• /
• pp.15-21
• /
• 2008

The advantages of prefabricated vertical drains over conventional sand drains include their relatively low costs, less disturbance to the soil mass, the easinees of installation, and their flexibility which ensures the integrity of the drains during installation. This study tested the change of discharge capacities with respect to the hydraulic gradients for each lateral pressure. From the test results, as increases the overburden pressure, the clay soil is being consolidated, and also lateral pressure to the PVD specimen is increased. Therefore, the discharge capacity is decreased. The size of opening space in the core of PVDs is proportionally related to the discharge capacity. The numerical analysis was performed with utilizing computer simulation with considering field conditions. The results of numerical analysis are compared well with the field measurements.