• Journal of Korean Home Economics Education Association
• /
• v.23 no.2
• /
• pp.1-16
• /
• 2011

This study investigates the relationship between the purchasing behavior for hair-care products and the attitude toward hair-care products by adolescents. A total of 412 middle and high school students located in Seoul and Gyunggi-do province participated in this research. SPSS 12.0 for Windows Program was utilized for statistical analysis. As a result, the hair concerns and the satisfaction of adolescents as well as their attitudes towards hair-care products were significantly affected by gender, school level, and educational experiences. Female high school students with some degree of educational experiences had a more rational and brand-oriented attitude. Students having a higher rational and brand-oriented attitude bought hair-care products in regards to the quality of the product and environmental impact. On the other hand, those having a conspicuous and fashion pursuit attitude showed an image and fashion concern purchasing behavior. Adolescents usually purchased styling and dyeing products at a cosmetic specialty store and hair-care cleaning products from a discount store. They obtained the information about hair-care products from relatives, personal experiences, and TV advertisements.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.7
• /
• pp.1020-1027
• /
• 2012

The purpose of this study was to investigate the priority of menu management by importance-performance analysis (IPA) of school foodservice menu attributes. Questionnaires were distributed to 448 school dietitians with an official letter, and a total of 292 responses were used for analysis. From the 21 menu attributes, the factors of 'nutrition', 'educational effect', 'capability consideration', 'ease of quality management', 'efficiency', and 'preference of students' were induced from exploratory factor analysis. The levels of importance (p<0.01) and performance (p<0.05) of the 'nutrition' factor were significantly higher with nutrition teachers than school dietitians, while the importance of the 'preference of students' factor showed significantly higher score with school dietitians (p<0.05). As a result of gap analysis for IPA, only the 'efficiency' factor was located in the area where performance was higher than importance, whereas no menu attribute factors were included in the 'concentrate here' area by the usual IPA. Further analysis showed that there should be more effort to improve the performance of an 'educational effect' factor for a school foodservice menu.

• Korean Journal of Clinical Laboratory Science
• /
• v.36 no.1
• /
• pp.19-26
• /
• 2004

According to increase of domestic blood components use, the quality control of blood components is necessary to support good products. The purpose of this study is used to provide the producing index of the good product as compared with the accuracy and validity for the distribution of the quality control data. The value of mean, standard deviation, 95% confidence interval and degree of normal distribution of data were calculated by univariate procedure, the value of monthly mean of each blood centers per items were compared by Analysis of Variance(ANOVA) test for the degree of distribution. When there was difference among the mean values, the Duncan's multiple range test was done to confirm the difference. Finally, methods for accessing accuracy and validity of the quality data was done by the Contingency table test. The quality data of five blood centers was showed to the normal distribution and it was in a acceptable range. For each blood centers, the monthly means of Hematocrit(Hct), Platelet(PLT) and pH were not significantly different except Hct of C center, PLT of B, D center and pH of A center. The quality data per items was graded according to quality to six level. As a result of the comparative analysis, the monthly means of Hct of C and E center was significantly different higher than that of D, B and A center. The monthly means of PLT of A center and pH of C center was significantly different higher than that of the others. In the accuracy and validity of the quality control data, C center for Hct, A center for PLT and C center for pH were better than the other. The C blood center was most satisfiable and stable in the quality control for blood component. If the quality control method used in C blood center is adopted in other blood centers, the prepared level of the blood component of the center will be improved partly.

• Korean journal of communication and information
• /
• v.46
• /
• pp.177-211
• /
• 2009

The purpose of this study is to investigate how portal users recognize the role and function of the portal as a press. Furthermore, this study aims to analyze the pattern of portal news use among portal users and their recognition about replies to news. For this, we conducted online survey of 1,036 people aged from 15 to 45, who used portal site at least once a week. As a result, most users(70.8%) agreed that portal news played a role as a press with other media. In addition, six out of ten agreed that portal news set the agenda of society. These results suggest that portal users think highly of the social impact and responsibility of portal in society. However, about 40 percent of respondents said that they did not trust in information shown in replies to news and many replies to news were written by albeit. Six out of ten thought that replies to news were written by intention. Therefore, to manage the quality of replies to news is necessary to secure the credibility of portal news. As respondents use portal news often, they tend to think that portals are convenient to use and their social impact is very large, at the same time considering their sensation and commercialization. On the other hand, as portal users use the internet often, they tend to think that portals are convenient to use and their social impact is immense. However, there was no significant relationship between income and portal users' recognition of portals as the press.

• Journal of Korea Water Resources Association
• /
• v.55 no.3
• /
• pp.245-255
• /
• 2022

Evaluating the qualitative the qualitative process of water resources by using various indicators, as one of the most prevalent methods for optimal managing of water bodies, is necessary for having one regular plan for protection of water quality. In this study, zoning maps were developed on a yearly basis by collecting and reviewing the process, validating, and performing statistical tests on qualitative parameters҆ data of the Iranian aquifers from 1995 to 2020 using Geographic Information System (GIS), and based on Inverse Distance Weighting (IDW), Radial Basic Function (RBF), and Global Polynomial Interpolation (GPI) methods and Kriging and Co-Kriging techniques in three types including simple, ordinary, and universal. Then, minimum uncertainty and zoning error in addition to proximity for ASE and RMSE amount, was selected as the optimum model. Afterwards, the selected model was zoned by using Scholar and Wilcox. General evaluation of groundwater situation of Iran, revealed that 59.70 and 39.86% of the resources are classified into the class of unsuitable for agricultural and drinking purposes, respectively indicating the crisis of groundwater quality in Iran. Finally, for validating the extracted results, spatial changes in water quality were evaluated using the Groundwater Quality Index (GWQI), indicating high sensitivity of aquifers to small quantitative changes in water level in addition to severe shortage of groundwater reserves in Iran.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.6
• /
• pp.921-926
• /
• 2022

Sugar solutions (5%, 10%, 15% and 20%) were tested by seven sensors of Astree E-Tongue for selecting a sensor for sweetness. NMS sensor was chosen as a sensor for sweetness among two sensors (PKS and NMS sensors selected in first stage) by considering precision, linearity and accuracy. Sugar, fructose, glucose and xylitol (5%, 10% and 15%) were tested by E-tongue. The principal component analysis (PCA) result by E-Tongue with seven sensors at 5% concentration level of four sweetners was not satisfactory (Discrimination index was -0.1). On the other hand, the relative NMS sensor response values were derived as 1.08 (fructose), 0.99 (glucose) and 1.00 (xylitol) comparing to sugar. Only the E-Tongue relative glucose response 0.99 was different from 0.5~0.75 of the relative sweetness range reported as the human sensory test results. Considering the excellent precision (%RSD, 1.53~3.64%) of E-Tongue using NMS single sensor for three types of sweeteners compared to sugar in the concentration range of 5% to 15%, replacing sensory test of sweetened beverages by E-Tongue might be possible for new product development and quality control.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.4
• /
• pp.417-428
• /
• 2023

The demolition of domestic infrastructures mirrors other significant construction initiatives in presenting a markedly high accident rate. A comprehensive investigation into the origins of such accidents is crucial for the prevention of future incidents. Upon detailed inspection, the causes of demolition construction accidents are multifarious, encompassing unsafe worker behavior, hazardous conditions, psychological and physical states, and site management deficiencies. While statistics relating to demolition construction accidents are consistently collated and reported, there exists an exigent need for a more foundational cause categorization system based on accident type. Drawing from Heinrich's Domino Theory, this study classifies the origins of accidents(unsafe behavior, unsafe conditions) and human errors(human factors) as per the type of accidents experienced during demolition construction. In this study, a three-step model of QFD-FMEA(Quality Function Deployment - Failure Mode Effect Analysis) is employed to systematically categorize accident causes according to the types of accidents that occur during demolition construction. The QFD-FMEA method offers a technique for cause classification at each stage of the demolition process, including direct causes(unsafe behavior, unsafe environment), and human errors(human factors) through a tri-stage process. The results of this accident cause classification can serve as safety knowledge and reference checklists for accident prevention efforts.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.4
• /
• pp.1108-1119
• /
• 2018

As the interest on the air pollution is gradually rising at home and abroad, automotive and fuel researchers have been studied on the exhaust and greenhouse gas emission reduction from vehicles through a lot of approaches, which consist of new engine design, innovative after-treatment systems, using clean (eco-friendly alternative) fuels and fuel quality improvement. This research has brought forward two main issues : exhaust emissions (regulated and non-regulated emissions, PM particle matter) and greenhouse gases of vehicle. Exhaust emissions and greenhouse gases of automotive had many problem such as the cause of ambient pollution, health effects. In order to reduce these emissions, many countries are regulating new exhaust gas test modes. Worldwide harmonized light-duty vehicle test procedure (WLTP) for emission certification has been developed in WP.29 forum in UNECE since 2007. This test procedure was applied to domestic light duty diesel vehicles at the same time as Europe. The air pollutant emissions from light-duty vehicles are regulated by the weight per distance, which the driving cycles can affect the results. Exhaust emissions of vehicle varies substantially based on climate conditions, and driving habits. Extreme outside temperatures tend to increasing the emissions, because more fuel must be used to heat or cool the cabin. Also, high driving speeds increases the emissions because of the energy required to overcome increased drag. Compared with gradual vehicle acceleration, rapid vehicle acceleration increases the emissions. Additional devices (air-conditioner and heater) and road inclines also increases the emissions. In this study, three light-duty vehicles were tested with WLTP, NEDC, and FTP-75, which are used to regulate the emissions of light-duty vehicles, and how much emissions can be affected by different driving cycles. The emissions gas have not shown statistically meaningful difference. The maximum emission gas have been found in low speed phase of WLTP which is mainly caused by cooled engine conditions. The amount of emission gas in cooled engine condition is much different as test vehicles. It means different technical solution requires in this aspect to cope with WLTP driving cycle.

• Progress in Medical Physics
• /
• v.25 no.3
• /
• pp.185-192
• /
• 2014

The purpose of this study is to evaluate the results for the quality assurance through a statistical analysis on the output characteristics of linear accelerators belonging to Yeungnam University Medical Center by using the Shewhart-type chart, Exponentially weighted moving average chart (EWMA) chart, and process capability indices $C_p$ and $C_{pk}$. To achieve this, we used the output values measured using respective treatment devices (21EX, 21EX-S, and Novalis Tx) by medical physicists every month from September, 2012 to April, 2014. The output characteristics of treatment devices followed the IAEA TRS-398 guidelines, and the measurements included photon beams of 6 MV, 10 MV, and 15 MV and electron beams of 4 MeV, 6 MeV, 9 MeV, 12 MeV, 16MeV, and 20 MeV. The statistical analysis was done for the output characteristics measured, and was corrected every month. The width of control limit of weighting factors and measurement values were calculated as ${\lambda}=0.10$ and L=2.703, respectively; and the process capability indices $C_p$ and $C_{pk}$ were greater than or equal to 1 for all energies of the linear accelerators (21EX, 21EX-S, and Novalis Tx). Measured values of output doses with drastic and minor changes were found through the Shewhart-type chart and EWMA chart, respectively. The process capability indices $C_p$ and $C_{pk}$ of the treatment devices in our institution were, respectively, 2.384 and 2.136 for 21EX, 1.917 and 1.682 for 21EX-S, and 2.895 and 2.473 for Novalis Tx, proving that Novalis Tx has the most stable and accurate output characteristics.

• Journal of Korean Society of Forest Science
• /
• v.110 no.4
• /
• pp.601-609
• /
• 2021

The fructification characteristics, fruit quality, and yield of the 'Hwangsil' jujube tree were analyzed at various stages of growth age (3-8 years old) to obtain basic data for developing high-quality jujube production technology. The average height, crown area, stem diameter near the root, stem clear length, the number of the main branches, and the distance between any two main branches were 230.8 cm (224.4~247.2 cm), 3.0 m² (2.1~3.8m²), 4.8 cm (2.4~6.2 cm), 69.1 cm (46.6~78.0 cm), 12.9 (8.6~19.6), and 8.1 cm (7.4~9.0 cm), respectively. Tree age was positively correlated with the crown area, stem diameter near the root, but stem clear length negatively correlated with the number of main branches. The average number of fruits per mother bearing shoot and tree was 20.0 (14.3~26.3) and 302.8 (257.3~373.5), respectively. There was no correlation between tree age and fructification characteristics, such as the number of fruit-bearing mother shoots per the main branch, the number of fruit-bearing shoots per fruit-bearing mother shoot, and the number of fruits per fruit-bearing shoot. Since the shape of the jujube tree is constantly managed based onthe growing area and type of greenhouse where the tree grown. The average fruit weight, fruit hardness, and soluble solid content were 24.2 g (22.4~26.8 g), 28.4 N (27.3~30.0 N), and 19.0% (17.1~19.8%), respectively, with no correlation between the tree age and fruit quality. The average yield was 7.4 kg per tree (5.7~9.1 kg), with significantly high quantities were produced in six and seven years old trees.