• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.10
• /
• pp.5123-5129
• /
• 2013

In this paper, it is proposed that JTAG fault injection environment and the results of the classification techniques that the reliability of embedded systems can be tested. As applying these, this is possible to quantitative analysis of vulnerable factor for system. The quantitative analysis for the degree of vulnerability of system is evaluated by faults errors, and failures classification schemes. When applying these schemes, it is possible to verify process and classify for fault that might occur in the system.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.363-363
• /
• 2017

각 기관에서는 가뭄상황을 모니터링하기 위해서 기관의 역할에 맞는 방식으로 가뭄지수를 산정하여 표출하고 있다. 국민안전처에서는 2016년 3월부터 부처간 협동으로 우리나라의 가뭄 상황을 기상학적 가뭄, 농업적 가뭄, 수문학적 가뭄으로 구분하여 행정구역단위로 주의, 심각, 매우심각의 3단계로 표출하여 활용하고 있다. 저류시설 등을 고려하여 가뭄지수를 도출하고 가뭄을 세가지 속성으로 나누어서 표출하는 것은 타당하지만, 동일한 행정구역 상에서 각 가뭄속성을 표현하는 것은 실제적인 가뭄상황의 판단과 적절한 전략적 대응을 위해서는 개선될 필요가 있다. 본 연구에서는 토지이용도를 기반으로 용수 이용 상황과 용수공급을 위한 사회기반시설을 고려해서 가뭄상황의 표현을 위한 구역의 재설정과 각 구역별로 적절한 가뭄지수의 적용 및 상황파악에 도움을 줄 수 있는 통계적 지표를 동시에 제공할 수 있는 프레임워크를 설계하고 이를 테스트베드를 대상으로 시범적으로 구현하였다. 산림이나 초지 지역, 관개시설에 의한 용수공급을 받는 논지역, 강수의존형 논지역과 밭지역, 광역상수도나 지방상수도에 의한 공급지역, 기타 생공용수 공급지역 등으로 구분하여 기상학적 가뭄, 농업적 가뭄, 수문학적 가뭄 상황이 동일 행정구역내에서도 서로 다른 값을 가질 수 있도록 하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.29 no.1
• /
• pp.82-90
• /
• 2010

This paper proposes an efficient method to enhance the quality of synthesized speech in HMM based speech synthesis system. The proposed method trains spectral parameters and excitation signals using Gaussian mixture model, and estimates appropriate excitation signals from spectral parameters during the synthesis stage. Both WB-PESQ and MUSHRA results show that the proposed method provides better speech quality than conventional HMM based speech synthesis system.

• KSBB Journal
• /
• v.22 no.5
• /
• pp.305-312
• /
• 2007

It is crucial to develop a miniaturized cultivation method for large and rapid screening of high-yielding mutants of monacolin-K, a powerful anti-hypercholesterolemic secondary metabolite biosynthesized by the fungal cells of Monascus ruber. In order to investigate as many strains as possible in a short time, a miniaturized fermentation method especially suitable for the cultivation of the filamentous Monascus mutants was developed using $50m{\ell}$ culture-tube ($7m{\ell}$ of working volume) instead of the traditional $250m{\ell}$ flask ($50m{\ell}$ of working volume). Generally, in filamentous fungal cell fermentations, morphologies in growth and production cultures should be maintained as thick filamentous and compact-pelleted (usually less than 1 mm in diameter) forms, respectively, for enhanced production of secondary metabolites in final production cultures. In this study, we intended to induce the respective optimal morphologies in the miniaturized culture system for the purpose of rapid screening of overproducers. Miniaturized growth culture system was successfully developed due to the mass production of spores in the statistically optimized solid medium. When large amounts of spores were inoculated into the growth cultures, and brown rice flour (20 g/L) was also supplemented to the growth medium, dense filamentous morphologies were successfully induced in the growth cultures performed with the 50 ml culture tubes. It was implied that the amounts of spores inoculated into the growth tube-cultures and the growth medium components should be the key factors for the induction of the filamentous forms in the growth fermentations. Furthermore, in order to statistically optimize production medium, multiple experiments based on Plackett-Burman design and response surface method (RSM) were carried out, resulting in more than 2 fold enhanced production of monacolin-K in the final production cultures with the optimized production medium. Notably, under the production culture conditions with the statistically optimized medium, optimal pellet sizes below 1 mm in diameter were reproducibly induced, in contrast to the thick and viscous filamentous morphologies observed in the previous production cultures.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.07b
• /
• pp.433-435
• /
• 2005

임베디드 시스템은 다수의 디바이스를 컨트롤하여 시스템의 목적을 수행한다. 최근 임베디드 시스템의 요구사항이 증가함에 따라 하나의 임베디드 소프트웨어가 컨트롤하는 디바이스의 종류가 다양해지고 수도 증가하는 추세이다. 다수의 디바이스를 가지고 있는 임베디드 시스템에서 시스템의 신뢰도는 각 디바이스의 신뢰도에 많은 영향을 받는다. 본 논문은 임베디드 시스템의 신뢰도를 측정하기 위해서 통계적 신뢰도 측정 방법 중 한 가지인 마르코프 체인을 이용한 방법을 제안한다. 마르코프 체인은 여러 분야에서 복잡한 시스템을 단순화하여 모델링하고 과거의 변화를 토대로 미래를 예측할 수 있는 방법을 제공한다. 또한 전체 시스템의 확률을 행렬로 계측할 수 있는 방법을 가지고 있어 특정 부분의 확률이 전체 시스템의 확률에 미치는 영향을 산술적으로 계산할 수 있는 장점을 가지고 있다. 본 논문에서 제안하는 임베디드 소프트웨어 마르코프 체인은 테스트 대상 소스를 분석하여 디바이스를 컨트롤하는 루틴과 에러를 핸들링하는 루틴, 일반적인 루틴으로 나누어 각각을 상태로 정의한다. 정의한 각 상태간의 전이는 통계적으로 측정한 디바이스 신뢰도를 확률로 표현한다. 마르코프 체인을 이용하여 임베디드 시스템의 신뢰도를 측정하기 위한 시스템은 소스 분석기와 신뢰도 측정기로 나누어 설계한다. 소스 분석기는 테스트 대상이 되는 소스와 디바이스 드라이버 라이블러리 테이블을 입력으로 하고 소프트웨어의 마르코프 체인을 출력으로 한다 마르코프 체인은 행렬로 표현하고 연산하여 시스템의 신뢰도를 측정한다. 제안하는 시스템의 신뢰도 측정 방법은 부분이 가지고 있는 신뢰도가 전체 신뢰도에 미치는 영향을 산술적으로 측정할 수 있어 시스템이 요구하는 신뢰도에 접근할 수 있는 방법과 근거를 제공하는 장점이 있다.소시키는 장점을 갖는다.것으로 조사되었으며 40대 이상의 연령층은 점심비용으로 더 많은 지출을 하고 있는 것으로 나타났다. 4) 끼니별 한식에 대한 선호도는 아침식사의 경우가 가장 높았으며, 이는 40대와 50대에서 높게 나타났다. 점심 식사로 가장 선호되는 음식은 중식, 일식이었으며 저녁 식사에서 가장 선호되는 메뉴는 전 연령층에서 일식, 분식류 이었으며, 한식에 대한 선택 정도는 전 연령층에서 매우 낮게 나타났다. 5) 각 연령층에서 선호하는 한식에 대한 조사에서는 된장찌개가 전 연령층에서 가장 높은 선호도를 나타내었고, 김치는 40대 이상의 선호도가 30대보다 높게 나타났으며, 흥미롭게도 30세 이하의 선호도는 30대보다 높게 나타났다. 그 외에도 떡과 죽에 대한 선호도는 전 연령층에서 낮게 조사되었다. 장아찌류의 선호도는 전 연령대에서 낮았으며 특히 30세 이하에서 매우 낮게 조사되었다. 한식의 맛에 대한 만족도 조사에서는 연령이 올라갈수록 한식의 맛에 대한 만족도는 낮아지고 있었으나, 한식의 맛에 대한 만족도가 높을수록 양과 가격에 대한 만족도는 높은 경향을 나타내었다. 전반적으로 한식에 대한 선호도는 식사 때와 식사 목적에 따라 연령대 별로 다르게 나타나고 있으나, 선호도는 성별이나 세대에 관계없이 폭 넓은 선호도를 반영하고 있으며, 이는 대학생들을 대상으로 하는 연구 등에서도 나타난바 같다. 주 5일 근무제의 확산과 초 중 고생들의 토요일 휴무와 더불어 여행과 엔터테인먼트산업은 더욱 더 발전을 거듭하고 있으며, 외식은 여행과 여가 활동의 필수적인 요소로써 그 역할을 일조하고 있다. 이와 같은 여가시간의 증가는 독신자들에게는 좀더 많은 여유시간을 가족을 이루고 있는 가족구성원들에게는 가족과의 유대를 강화하는 휴식과 오락의 소비 트렌드를 창출시켰

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.31 no.1 s.49
• /
• pp.59-64
• /
• 2005

In case of lipsticks, observer's subjective sensitivity has been the main index to estimate gloss and gloss-lasting capability. The glossmeter has been applied to measure the gloss of make-up cosmetics like nail enamel, however is not effective for lipstick because of uneven sampling. Also gloss-lasting capability couldn't have been measured. In this study, we optimized measurement methods of gloss and gloss-lasting capability of lipsticks, which are highly correlated to subjective sensory tests. We set up the standard methods of gloss measurement by changing application conditions, for example, materials, sizes and application number of times and so on. And we introduced optimizing measurement system, in which shaking speed and temperature were controlled to measure gloss-lasting capability. Applying our methods, the gloss values were very close to the results of sensory tests, and we could express the gloss and gloss-lasting capability of lipsticks numerically Repeatability and reproducibility of our methods were certified by six-sigma statistical tool.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.3
• /
• pp.44-53
• /
• 2010

The H.264/AVC has been designed to use 9 directional intra prediction modes for removing spatial redundancy. It also employs high correlation between neighbouring block modes in sending mode information. For indication of the mode, smaller bits are assigned for higher probable modes and are compressed by predicting the mode with minimum value between two prediction modes of neighboring two blocks. In this paper, we calculated the statistical probability of prediction modes of the current block to exploit the correlation among the modes of neighboring two blocks with several test video sequences. Then, we made the probable prediction table that lists 5 most probable candidate modes for all possible combinatorial modes of upper and left blocks. By using this probability table, one of 5 higher probable candidate modes is selected based on RD-optimization to reduce computational complexity and determines the most probable mode for each cases for improving compression performance. The compression performance of the proposed algorithm is around 1.1%~1.50%, compared with JM14.2 and we achieved 18.46%~36.03% improvement in decoding speed.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.4
• /
• pp.131-143
• /
• 2014

We propose a no-reference perceptual fog density and visibility prediction model in a single foggy scene based on natural scene statistics (NSS) and perceptual "fog aware" statistical features. Unlike previous studies, the proposed model predicts fog density without multiple foggy images, without salient objects in a scene including lane markings or traffic signs, without supplementary geographical information using an onboard camera, and without training on human-rated judgments. The proposed fog density and visibility predictor makes use of only measurable deviations from statistical regularities observed in natural foggy and fog-free images. Perceptual "fog aware" statistical features are derived from a corpus of natural foggy and fog-free images by using a spatial NSS model and observed fog characteristics including low contrast, faint color, and shifted luminance. The proposed model not only predicts perceptual fog density for the entire image but also provides local fog density for each patch size. To evaluate the performance of the proposed model against human judgments regarding fog visibility, we executed a human subjective study using a variety of 100 foggy images. Results show that the predicted fog density of the model correlates well with human judgments. The proposed model is a new fog density assessment work based on human visual perceptions. We hope that the proposed model will provide fertile ground for future research not only to enhance the visibility of foggy scenes but also to accurately evaluate the performance of defog algorithms.

• Archives of design research
• /
• v.19 no.2 s.64
• /
• pp.109-120
• /
• 2006

Part of public arts, environmental builforms not only enhance the beauty of a building, but also serve to stabilize the citizen's psychology and as a landmark having intimate values with the city environment and symbolic meanings. Thus they do have sociocultural values as an original formative artwork. The purpose of this study was to suggest evaluation and review methods and an evaluation framework for environmental builtforms, which had legal binding under the building decoration system, to a local government to improve the quality level of urban environment. It will be such a distant goal of creating a desirable urban environment as long as environmental builtforms are merely regarded as an object to follow a vogue and a mandatory passage procedure. It's important to take a perspective of an expert to set up and suggest an evaluation system in the public aspects. In the study a consideration was made of the current systems and review criteria of environmental builtforms, which was followed by the development of a theoretical research model and of a framework for statistical evaluation by a group of experts. The questionnaire designed based on the theoretical research model was tested for validity and reliability. Its pilot test results were then analyzed to verify the hypotheses. The questionnaire collected twice were statistically analyzed in exploratory and confirmatory factor analysis with the SPSSWIN 11 program. All the analysis results were used to come up with a final evaluation framework.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.7
• /
• pp.45-55
• /
• 1999

In this paper, we used the WLMS(Wavelet domain Least Mean Square) adaptive filter based on the wavelet transform to cancel grain noise. Usually, grain noise occurs in changes of the crystalline structure of metals in high temperature environment. It makes the detection of flaw difficult. The WLMS adaptive filtering algorithm establishes the faster convergence rate by orthogonalizaing the input vector of adaptive filter as compared with that of LMS adaptive filtering algorithm in time domain. We implemented the WLMS adaptive filter by using the delayed version of the primary input vector as the reference input vector and then implemented the CA-CFAR(Cell Averaging- Constant False Alarm Rate) threshold estimator. CA-CFAR threshold estimator enables to detect the flaw and back echo signals automatically. Here, we used the output signals of adaptive filter as its input signal. To Cow the statistical characteristic of ultrasonic signals corrupted by grain noise, we performed run test. The results showed that ultrasonic signals are nonstationary signal, that is, signals whose statistical properties vary with time. The performance of each filter is appreciated by the signal-to-noise ratio. After LMS adaptive filtering in time domain, SNR improves to about 2-3㏈ but after WLMS adaptive filtering in wavelet domain, SNR improves to about 4-6㏈.