• Journal of Energy Engineering
• /
• v.24 no.2
• /
• pp.167-173
• /
• 2015

This paper attempts to estimate the electricity demand function in Korea with quarterly data of average temperature, GDP and electricity price over the period 2005-2013. We apply lagged dependent variable model and ordinary least square method as a robust approach to estimating the parameters of the electricity demand function. The results show that short-run price and income elasticities of the electricity demand are estimated to be -0.569 and 0.631, respectively. They are statistically significant at the 1% level. Moreover, long-run income and price elasticities are estimated to be 1.589 and -1.433, respectively Both of results reveal that the demand for electricity is price- and income-elastic in the long-run. The relationship between electricity consumption and temperature is supported by many of references as a U-shaped relationship, and the base temperature of electricity demand is about $15.2^{\circ}C$. It is shown that power of explanation and goodness-of-fit statistics are improved in the use of the lagged dependent variable model rather than conventional model.

• Korean Journal of Psychosomatic Medicine
• /
• v.28 no.2
• /
• pp.135-142
• /
• 2020

Objectives : To identify the relationship between somatization, stress, depression, anxiety, and psychological symptoms risk for nurses working in the intensive care unit. Create clinical evidence of psychosomatic medicine research and complement the meaning of somatization. Methods : Seventy of the mental health checkups conducted by the National Mental Health Center among the nurses using tools including Perceived Stress scale, Fatigue Severity Scale, Patient Health questionnaire-15, Korean Beck Depression Inventory, Korean Beck Anxiety Inventory, and Symptom Checklist-90-Revision. Results : 12.9% of the patients experienced more than moderate somatization. There was no statistical relationship between somatization and psychological stress perception, but feeling of anxiety and decreased self-confidence were related to the level of somatization. The group with severe somatization experienced more depression and anxiety. The group with high physical fatigue also had no statistical relationship with psychological stress perception, but had an effect on the feeling of tension, stress, or decreased control. Physical fatigue level was increased by experience of depression, not by anxiety. For psychological symptoms the higher the level of somatization, the higher the obsession and hostility was explored. In the linear regression model, stress, depression, and anxiety accounted for 39.3% of somatization and 16.1% of physical fatigue symptoms. Conclusions : We can estimate the decrease in stress cognitive symptoms, accompanying depression and anxiety, compulsion and hostility as characteristics of somatization. The causal relationship between somatization and psychological symptoms cannot be confirmed in this study, but the interrelationships are observed, can be referred to mediation strategies.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.4
• /
• pp.351-363
• /
• 2020

Launch vehicles are subject to airborne acoustic loads during atmospheric flight and these effects become pronounced especially in transonic region. As the vibration due to the acoustic loads can cause malfunction of payloads, it is essential to predict and reduce the acoustic loads. In this study, a complete process has been developed for predicting airborne vibro-acoustic environment inside the payload pairing and subsequent noise reduction procedure employing acoustic blankets and Helmholtz resonators. Acoustic loads were predicted by Reynolds-Averaged Navier-Stokes (RANS) analysis and a semi-empirical model for pressure fluctuation inside turbulent boundary layer. Coupled vibro-acoustic analysis was performed using VA One SEA's Finite Element Statistical Energy Analysis (FE-SEA) hybrid module and ANSYS APDL. The process has been applied to a hammerhead launch vehicle to evaluate the effect of acoustic load reduction and accordingly to verify the effectiveness of the process. The presently developed process enables to obtain quick analysis result with reasonable accuracy and thus is expected to be useful in the initial design phase of a launch vehicle.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.1
• /
• pp.80-90
• /
• 2001

The aim of this study is to develop the methodology which enables to identify the mechanical properties of element such as stress intensity factor by using the AE parameters. Considering the multivariate and nonlinear properties of AE parameters such as ringdown count, rise time, energy, event duration and peak amplitude from fatigue cracks of machine element the principal component regression(PCR) and artificial neural network(ANN) models for the estimation of stress intensity factor were developed and validated. The AE parameters were found to be very significant to estimate the stress intensity factor. Since the statistical values including correlation coefficients, standard mr of calibration, standard error of prediction and bias were stable, the PCR and ANN models for stress intensity factor were very robust. The performance of ANN model for unknown data of stress intensity factor was better than that of PCR model.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.12
• /
• pp.407-414
• /
• 2016

This study was conducted to investigate the effects of supplementation of dietary betaine on nutrient digestibility and physiological responses in finishing pigs. A total of twelve pigs with a body weight of $80.1{\pm}3.7kg$ were individually caged, and randomly assigned to one of the two experimental diets containing 0 (control) or 5 g/kg (treatment) of the betaine in a $2{\times}2$ Latin square design. The experimental period was 14 days-7 days adaptation and 7 days trial period-per phase. All data for the difference between control and treatment groups were statistically analyzed by student's t-test. Dry matter and crude protein digestibility in the treatment group were significantly improved by 1% and 1.3%, respectively, as compared with those in the control (p<0.05). The apparent absorption of dietary energy was increased from 82.3% to 83.7% by dietary betaine supplementation. Thus, the retention of energy was also significantly increased to above 6% in the treatment group compared with the control group (control 4,057 vs treatment 4,314 kcal; p<0.01). The physiological parameters indicating serum biochemical contents and stress-, immune-, and inflammatory- responses were not changed by the supplementation of dietary betaine. In conclusion, dietary betaine improves the nutrient digestibility without any negative effects in terms of physiology in finishing pigs. It suggests that the supplementation of dietary betaine may increase the productivity through the improvement of weight gain and feeding efficiency.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.1
• /
• pp.103-113
• /
• 2020

Jack-up drilling rigs are widely used in the offshore oil and gas exploration industry. Although originally designed for use in shallow waters, trends in the energy industry have led to a growing demand for their use in deep sea and harsh environmental conditions. To extend the operating range of jack-up units, their design must be based on reliable analysis while eliminating excessive conservatism. In current industrial practice, jack-up drilling rigs are designed using the working(or allowable) stress design (WSD) method. Recently, classifications have been developed for specific regulations based on the load and resistance factor design (LRFD) method, which emphasises the reliability of the methods. This statistical method utilises the concept of limit state design and uses factored loads and resistance factors to account for uncertainly in the loads and computed strength of the leg components in a jack-up drilling rig. The key differences between the LRFD method and the WSD method must be identified to enable appropriate use of the LRFD method for designing jack-up rigs. Therefore, the aim of this study is to compare and quantitatively investigate the differences between actual jack-up lattice leg structures, which are designed by the WSD and LRFD methods, and subject to different environmental load-to-dead-load ratios, thereby delineating the load-to-capacity ratios of rigs designed using theses methods under these different enviromental conditions. The comparative results are significantly advantageous in the leg design of jack-up rigs, and determine that the jack-up rigs designed using the WSD and LRFD methods with UC values differ by approximately 31 % with respect to the API-RP code basis. It can be observed that the LRFD design method is more advantageous to structure optimization compared to the WSD method.

• Journal of Nutrition and Health
• /
• v.41 no.3
• /
• pp.254-263
• /
• 2008

This study was conducted to analyze the effect of isoflavone intake on prevention of chronic disease in middle and old aged man. In this study we used FFQ (Food frequency questionnaire) and the isoflavone intake level of the subjects was 25.10 mg per day. We divided the subjects into three group -high, medium, low isoflavone intake level- and investigated the relation among isoflavone intake level and clinical/anthropometric characteristics. The intake of isoflavone was inversely related with the body fat in male subjects. And we also divided the subjects into 2 groups with normal and abnormal clinical/anthropometric risk factor. The isoflavone intake level of the abnormal group with high TG, high WHR and high body fat was lower than the normal group. The main food source of isoflavone was soybean curd, bean sprout, soybean paste, soybean and soy milk, and we also investigated the relation between frequency of soybean food and anthropometric and clinical variables. The frequencies of soybean curd, soybean paste, soybean broth, soy milk, bean sprouts, peanuts, soybean and dambuk as well as intake of isoflavone were inversely correlated with some anthropometric and clinical variables such as blood pressure, TG, BMI, % body fat, and waist-hip ratio, whereas positively correlated with HDL cholesterol, muscle mass and bone density. We suggest that high consumption of soy products and isoflavone is associated with decreased blood lipid and body fat in middle and old aged man and might be useful for prevention cardiovascular diseases. From this study, we obtained valuable basic information on recommended isoflavone intake level and guidelines for the prevention of some chronic diseases/health problems.

• Journal of radiological science and technology
• /
• v.33 no.1
• /
• pp.19-24
• /
• 2010

The aim of this study was to evaluate the change of bone mineral density according to distal radius rotation and the correlations of the lowest BMD measured by DXA at the lumba versus distal radius. The eleven males were projected distal radius by DR X-ray and the measurement of BMD by DXA of the appropriate position of the forearm were performed on 21 males. The healthy 11 and 21 volunteers without any history of operations, anomalies, or trauma were enrolled. The experiment was performed by two methods. First, The DR X-ray was measured distal radius of 11 males in pronation and supination with three, six and nine degrees, including a neutral position. The ROI was measured by the m-view program on the PACS monitor. Second, The DXA was measured distal radius of 21 males in pronation and supination with five and ten degrees, including a neutral position to evaluate the changes of BMD according to the rotation. A correlation of the BMD in the distal radius with BMD that lumbar spine was performed, along with analysis of the data by SPSS 12.0v. The mean rotation angle of the distal radius about eleven males DR X-ray measured $7^{\circ}$ of pronation (82%, n = 9), $6^{\circ}$ of supination and $0^{\circ}$ of neutral of (9%, n = 1), The total average rotation angle in 11 male was $5.1^{\circ}$ of pronation. The rotation angle of the distal radius about twenty one males on DXA measured $7.2^{\circ}$ of pronation (43%, n = 9), $7^{\circ}$ of supination (24%, n = 5), and $0^{\circ}$ of neutral (33%, n = 7), The total average rotation angle in 21 people was $4.1^{\circ}$ of pronation. The correlation of the analysis of lumba and distal radius were r = 3.0, p = 0.18. consequently, The correlation was not significance. Because BMD of lumba was not coverd for BMD of the distal radius, with a neutral position, Pronation is needed for BMD in the distal radius with the rotation angle measuring at the lowest BMD. the rotation angle about five degrees of pronation of the distal radius is recommended.