• Journal of the Korea Organic Resources Recycling Association
• /
• v.27 no.2
• /
• pp.31-40
• /
• 2019

In Korea, 51,013 thousand tons of livestock manure was generated in 2018. A total of 46,530 thousand tons, which is 91.2% of the total amount of livestock manure generated, was treated by composting(40,647 thousand tons) or liquid fertilization(5,884 thousand tons) method. At present, the policy of livestock manure treatment in Korea is to make livestock manure into organic fertilizer(compost, liquid fertilizer) and then to applicate it on agricultural land. And this policy is very effective in terms of livestock manure treatment and nutrient recycling. However, considering the steadily declining farmland area for decades, the use of livestock manure compost could be limited in the future. There is also concern that local nutrient overloading, nutrient management regulation, and restrictions on the number of livestock may become serious problem for livestock manure treatment. In addition, there are some opinions that nutrient derived from livestock manure may flow into tributaries of major dams. In recent years, there has been a suspicion that fine dust may be generated from livestock manure compost. In recent years, the use of livestock manure fertilizer has been rapidly increasing, there is a growing demand of the development of new technologies for livestock manure treatment. Especially, cow excretes a larger amount of manure than other livestock, so that the efficiency of development of new technology for cow manure treatment will be high. Therefore, in this study, the combustion characteristics of cow manure pellet were investigated in order to analyzed whether cow manure could be used as source of solid fuel. During the combustion test, the weight loss of the cow manure pellet began to increase when the temperature of the combustion chamber reached $300^{\circ}C$. The ratio of $H_2$, $CH_4$, CO in the pyrolysis gas produced in the pyrolysis process of cow manure pellet were 6.65~11.62%, 0.58~1.54 and 11.47~14.07%, respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.12
• /
• pp.2476-2484
• /
• 2015

Narrow band signal estimation and broad band signal estimation can be used to detect the ship-radiated noise. The broad band signal estimation method to detect the ship-radiated noise is called DEMON (Detection of Envelop Modulation On Noise). This paper proposes a new DEMON algorithm applying compressed sensing algorithm to filter bank and autocorrelation. We show the proposed algorithm estimates the hidden period in the wide band signal better than the conventional DEMON algorithm and the recently proposed filter-bank based DEMON algorithm. Especially we show that the proposed algorithm needs shorter data length than the conventional DEMON algorithm.

• Journal of Korea Game Society
• /
• v.12 no.5
• /
• pp.57-66
• /
• 2012

This paper to the scene to fit the fluid can be expressed as cartoon-style real-time method is proposed. As a matter of fact the fluid color in the simulation in which both reflection refraction and color tones are different in both cases. This paper light, water, terrain, time, etc. with cartoon-style representation of the fluid, adaptive way is proposed. Experimental implementation of the existing and proposed methods were compared with the results. This cartoon-style rendering of the existing research methods and the proposed method and at the same time using cartoon-style games that can be represented by the entire system could offer.

• Journal of Environmental Policy
• /
• v.5 no.1
• /
• pp.1-23
• /
• 2006

This study explores what potential future greenhouse gas allocation schemes might mean for OECD countries, and discusses a number of concepts of equity, examines three specific burden sharing rules and formulae. The results indicate that Korea reduces its emission from 8.1% and 19.8% which is 34.9-85.8 million tons of $CO_2$ emission on the assumption that the overall level of abatement remains 20% of total 2000 OECD emissions.

• New & Renewable Energy
• /
• v.3 no.4
• /
• pp.77-89
• /
• 2007

폐기물의 플라즈마를 이용한 열분해-가스화-용융 처리공정은 청정연료 형태로 정화된 합성가스를 얻을 수 있고, 이 합성가스를 WGS 반응과 PSA 공법을 이용하면 고순도 수소로의 전환 및 회수가 가능하다. (주)애드플라텍에서는 자체 보유하고 있는 3톤/일급 플라즈마 폐기물 처리설비와 수소 정제/회수시스템을 연계하여, 페기물로부터 고순도 수소 생산($20Nm^3/h$이상)을 위한 플라즈마 폐기물 처리 추소 생산 통합시스템 개발을 진행하고 있다. 합성가스 내 질소 농도를 낮추기 위해 산소를 매질로 하는 100kw급 산소 플라즈마 토치를 제작하였다. 수소 정제/회수 시스템은 폐기물의 플라즈마 처리 후의 합성가스 생성량과 조성의 변화에 대응할 수 있도록 하였으며, WGS 반응기로 들어가는 합성가스를 가스 컴프레서를 통하여 최대 10기압으로 승압시키고, 고농도 일산화탄소의 효과적인 제거 및 열 회수 극대화가 이루어질 수 있는 최적의 가스처리 시스템으로 구현되도록 하였다. 설치 완료된 WGS 반응기의 성능시험을 플라즈마 처리설비와 연계하여 수행하였다. 합성가스 내 각각 34%와 25%의 일산화탄소 및 수소의 농도가 WGS 반응기를 거친 후, 일산화탄소는 0.1% 미만으로 제거되었으며 수소는 44%로 증가하여 WGS 반응기의 성능 수준이 매우 우수함을 확인하였다. 차기 년도에 설치/가동 예정인 수소 생산용 PSA는 최대 10기압 운전 및 상압재생 방식으로 운전되며 생산된 수소는 최소 99.99%이상의 고순도를 유지할 것으로 기대된다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.627-632
• /
• 2007

폐기물의 플라즈마를 이용한 열분해-가스화-용융 처리공정은 청정연료 형태로 정화된 합성가스를 얻을 수 있고, 이 합성가스를 WGS 반응과 PSA 공법을 이용하면 고순도 수소로의 전환 및 회수가 가능하다. (주)애드플라텍에서는 자체 보유하고 있는 3톤/일급 플라즈마 폐기물 처리설비와 수소 정제/회수시스템을 연계하여, 폐기물로부터 고순도 수소 생산 ($20Nm^3/h$ 이상)을 위한 플라즈마 폐기물 처리 수소 생산 통합시스템 개발을 진행하고 있다. 합성가스 내 질소 농도를 낮추기 위해 산소를 매질로 하는 100kW급 산소 플라즈마 토치를 제작 하였다. 수소 정제/회수 시스템은 폐기물의 플라즈마 처리 후의 합성가스 생성량과 조성의 변화에 대응할 수 있도록 하였으며 WGS 반응기로 들어가는 합성가스를 가스 컴프레서를 통하여 최대 10기압으로 승압시키고, 고농도 일산화탄소의 효과적인 제거 및 열 회수 극대화가 이루어질 수 있는 최적의 가스처리 시스템으로 구현되도록 하였다. 설치 완료된 WGS 반응기의 성능시험이 플라즈마 처리설비와 연계하여 수행되었으며 WGS 반응기를 거친 일산화탄소의 농도는 1.5% 미만으로 분석되었다. 차기 년도에 설치/가동 예정인 수소 생산용 PSA는 최대 10기압 운전 및 상압재생 방식으로 운전되며 생산된 수소는 최소 99.99%이상의 고순도를 유지할 것으로 기대된다.

• Aerospace Engineering and Technology
• /
• v.11 no.1
• /
• pp.84-90
• /
• 2012

Fuel shutoff valve of a combustion chamber controls propellant mass flowrate of a rocket engine, by using pilot pressure and spring force. The developing fuel shutoff valve can be self sustained even though pilot pressure is removed in an actuator. Therefore, it is necessary to analyze the characteristics of the forces with respect to the opening and closing of the valve in order to evaluate its performance. In light of this, the valve has been designed to adjust the control pressure for the opening of the poppet and to determine the working fluid pressure at which the valve starts to close. This paper also has been predicted flow coefficient of the valve by Fluent(ver. 12.0) CFD analysis. Various results from the prediction and the analysis have been compared with experiments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.4C
• /
• pp.453-459
• /
• 2009

Due to its capability to resist jamming signals, chirp spread spectrum (CSS) technique has attracted much attention in the field of wireless communications. However, there has been little rigorous analysis for the performance of CSS systems in the presence of jamming signals. In this paper, thus, we present analytic results on the performance of a CSS system: specifically, symbol error rate (SER) expressions are derived for a CSS M-ary phase shift keying (MPSK) system in the presence of broadband and tone jamming signals, respectively. The numerical results show that the empirical SER closely agree with the analytic result.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.9 no.6
• /
• pp.598-604
• /
• 1999

A new fuzzy control algorithm for the control of active magnetic bearing (AMB) systems is proposed in th~sp aper. It combines PDC algorithm based on the LMI design of Joh et al. [4,5] and Mamdani-type control rules using fuzzy singletons to handle the nonlinear characteristics of AMB systems efficiently. They are named fine mode control and coarse mode control, respectively. The coarse mode control yields fast response for large deviation of the rotor and the fine mode control gives desired transient response for small deviation of the rotor. The proposed algorithm is applied to an AMB system to verify the performance of the proposed method. The comparison of the proposed method with a linear controller using a linearized model about the equilibrium point and the PDC algorithm show the superiority of the proposed algorithm.

• Environmental and Resource Economics Review
• /
• v.14 no.2
• /
• pp.419-445
• /
• 2005

In 2002, the waste was generated about 277,533tons per day. The treatments of waste were recycling, which had accounted for almost 70%, landfill, which had accounted for 19.8%, and incineration, which had accounted for 6.5%. The energy recovery from incineration has been increased since 1995. The portion of waste in the renewable energy has been increased. Waste incineration heating system generates total 134TOE of $CO_2$ as compared to 6,800TOE of GHG from LNG boiler centralized heating system to bring 98% reduction rate of GHG emissions. We need the integrated model to examine the impacts of waste managements on economy and environments. The Asia-Pacific Integrated Model is introduced as the example of the integrated model.