• Title/Summary/Keyword: 토폴로지 데이터분석

Search Result 68, Processing Time 0.026 seconds

Hop Based Gossiping Protocol (HoGoP) for Broadcasting Message Services in Wireless Sensor Networks (무선 센서 망에서 브로드캐스팅 메시지 서비스를 위한 홉 기반 가십 프로토콜)

  • So, Won-Ho
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.35 no.1B
    • /
    • pp.144-153
    • /
    • 2010
  • Flooding based routing protocols are usually used to disseminate information in wireless sensor networks. Those approaches, however, require message retransmissions to all nodes and induce huge collision rate and high energy consumption. In this paper, HoGoP (Hop based Gossiping Protocol) in which all nodes consider the number of hops from sink node to them, and decide own gossiping probabilities, is introduced. A node can decide its gossiping probability according to the required average reception percentage and the number of parent nodes which is counted with the difference between its hop and neighbors' ones. Therefore the decision of gossiping probability for network topology is adaptive and this approach achieves higher message reception percentage with low message retransmission than the flooding scheme. Through simulation, we compare the proposed protocol with some previous ones and evaluate its performance in terms of average reception percentage, average forwarding percentage, and forwarding efficiency. In addition, average reception percentage is analyzed according to the application requirement.

Performance Analysis of GeoRouting Protocol in Vehicle Communication Environment (차량 통신 환경에서GeoRouting 프로토콜 성능 분석)

  • An, Sung-Chan;Lee, Joo-Young;Jung, Jae-Il
    • Journal of IKEEE
    • /
    • v.18 no.3
    • /
    • pp.427-434
    • /
    • 2014
  • The Multihop Routing of vehicle communication environment is difficult to maintain due to heavy fluctuation of network topology and routing channel according to the movement of the vehicle, road property, vehicle distribution. We implemented GeoNetworking on the basis of ETSI(European Telecommunication Standard Institute) to maintain the vehicle safety service. GeoNetworking has its own way that delivers the data through the Unicast and Broadcast. In this paper, we compared performance index such as packet delivery ratio, end-to-end delay about GeoNetworking using the QualNet Network Simulator. Previous research assessed performance of GeoUnicast. This research has been additionally performed about GeoBroadcast, and we progressed algorithm performance through the comparison of CBF(Contention based Forwarding) of GeoUnicast with Greedy forwarding of GeoBroadcast.

Multi-Hop MAC Protocol for Wireless Sensor Networks (센서 네트워크를 위한 멀티 홉 MAC 프로토콜)

  • Cho, Kyong-Tak;Bahk, Sae-Woong
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.34 no.6A
    • /
    • pp.506-514
    • /
    • 2009
  • To minimize energy consumption, most of MAC Protocols in WSNs exploit low duty cycling. Among those, RMAC [4] allows a node to transmit a data packet for multiple hops in a single duty cycle, which is made possible by exploiting a control frame named Pioneer (PION) in setting up the path. In this paper, we present a MAC Protocol called Hop Extended MAC (HE-MAC) that transmits the data packet for more multiple hops in a single duty cycle. It employs an EXP (Explorer) frame to set up the multiple hop transmission, which contains the information of the maximum hop that a packet can be transmitted. With the use of the information in EXP and an internal state of Ready to Receive (RTR), HEMAC extends the relay of the packet beyond the termination of the data period by two more hops compared to RMAC. Along with our proposed adaptive sleeping method, it also reduces power consumption and handles heavy traffic efficiently without experiencing packet inversion observed in RMAC. We analytically obtain the packet delivery latency in HE-MAC and evaluate the performance through ns-2 simulations. Compared to RMAC, HE-MAC achieves 14% less power consumption and 20% less packet delay on average for a random topology of 300 nodes.

A Delay Tolerant Vehicular Routing Protocol for Low Vehicle Densities in VANETs (차량 밀도가 낮은 VANET 환경을 위한 지연 허용 차량 라우팅 프로토콜)

  • Cha, Si-Ho;Ryu, Min-Woo;Cho, Kuk-Hyun
    • Journal of the Institute of Electronics Engineers of Korea CI
    • /
    • v.49 no.4
    • /
    • pp.82-88
    • /
    • 2012
  • A VANET (Vehicular Ad Hoc Network), a subclass of MANET (Mobile Ad Hoc Network), is an ad hoc network using wireless communication between vehicles without fixed infrastructure such as base station. VANET suffers a frequent link breakage and network topology change because of the rapid movement of vehicles and the density change of vehicles. From these characteristics of VANET, geographical routing protocols such as GPSR (Greedy Perimeter Stateless Routing) using only the information of neighbor nodes are more suitable rather than AODV and DSR that are used in existing MANETs. However, GPSR may have a transmission delay and packet loss by frequent link disconnection and continual local maxima under the low vehicle density conditions. Therefore, in this paper, we propose a DTVR (Delay Tolerant Vehicular Routing) algorithm that perform a DTN-based routing scheme if there is no 2-hop neighbor nodes for efficient routing under the low vehicle densities in VANETs. Simulation results using ns-2 reveal that the proposed DTVR protocol performs much better performance than the existing routing protocols.

Modeling and Simulation for using Multiple Routing Protocols in Wireless Sensor Networks (무선 센서 네트워크에서 다중 라우팅 프로토콜 사용을 위한 모델링과 시뮬레이션)

  • Nam, Su Man;Cho, Tae Ho;Kim, Hyung Jong
    • Journal of the Korea Society for Simulation
    • /
    • v.29 no.3
    • /
    • pp.73-82
    • /
    • 2020
  • In the fourth industrial revolution, wireless sensor networks (WSNs) are an important element of collecting and analyzing data in a variety of environments without human intervention. This sensor network is greatly affected by topology and routing protocols. Routing protocols, which affect energy consumption, are executed after deploying sensor nodes. Once built, they are difficult to change. Before the WSN is deployed, a routing protocol is carefully selected in view of various environments and the performance of the protocol is evaluated. In this paper, we propose a model to simulate multiple routing protocols using a discrete event system specification (DEVS). The DEVS-based proposed model simulates various situations without changes and structures of the its model as algorithms of the routing protocols are implemented in its coordinators model. To verify normal behaviors of the proposed model, the number of report delivery and the energy consumption of the sensor network were compared using representative protocols LEACH and Dijkstra. As a result, it was confirmed that the proposed model executes normally in both routing protocols.

Multi-Protocol Based Routing Selection Scheme for MANET Using Mobility and Connectivity (MANET에서 이동성과 연결성을 고려한 다중 모드 라우팅 프로토콜 적용 기법)

  • Heo, Ung;Wan, Xin;Zhao, Yi;You, Kang-Soo;Choi, Jae-Ho
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.47 no.5
    • /
    • pp.40-52
    • /
    • 2010
  • A mobile ad hoc network is instant and heuristic, and it is also vulnerable and volatile. Since topology and route changes are frequent, no single routing protocol designed for a conventional network performs well. Some protocols suffer from significant performance degradation when the number of nodes increases, or when nodes become highly mobile. In this paper we investigate a way to adaptively select a routing protocol that fits to the real-time network conditions. The first phase of our study is to analyze the performances of two classes of routing protocols under various network scenarios. The second phase consists of constructing a routing protocol selection reference. All nodes continue to monitor the status of neighbor nodes and control packets exchanged. Then, the aggregated information is periodically compared against the protocol selection reference. The selected routing protocol is maintained throughout the network until the network property changes substantially. The performance of the proposed algorithm is verified by a set of computer simulations using the OPNET modeler. The experimental results show that selectively changing routing protocol adaptive to the network conditions greatly improves the efficacy of bandwidth utilization.

Resource Clustering Simulator for Desktop Virtualization Based on Intra Cloud (인트라 클라우드 기반 데스크탑 가상화를 위한 리소스 클러스터링 시뮬레이터)

  • Kim, Hyun-Woo
    • KIPS Transactions on Software and Data Engineering
    • /
    • v.8 no.1
    • /
    • pp.45-50
    • /
    • 2019
  • With the gradual advancement of IT, passive work processes are automated and the overall quality of life has greatly improved. This is made possible by the formation of an organic topology between a wide variety of real-life smart devices. To serve these diverse smart devices, businesses or users are using the cloud. The services in the cloud are divided into Infrastructure as a Service (IaaS), Platform as a Service (PaaS) and Software as a Service (SaaS). SaaS runs on PaaS, and PaaS runs on IaaS. Since IaaS is the basis of all services, an algorithm is required to operate virtualization resources efficiently. Among them, desktop resource virtualization is used for resource high availability of unused state time of existing desktop PC. Clustering of hierarchical structures is important for high availability of these resources. In addition, it is very important to select a suitable algorithm because many clustering algorithms are mainly used depending on the distribution ratio and environment of the desktop PC. If various attempts are made to find an algorithm suitable for desktop resource virtualization in an operating environment, a great deal of power, time, and manpower will be incurred. Therefore, this paper proposes a resource clustering simulator for cluster selection of desktop virtualization. This provides a clustering simulation to properly select clustering algorithms and apply elements in different environments of desktop PCs.

Construction of Gene Network System Associated with Economic Traits in Cattle (소의 경제형질 관련 유전자 네트워크 분석 시스템 구축)

  • Lim, Dajeong;Kim, Hyung-Yong;Cho, Yong-Min;Chai, Han-Ha;Park, Jong-Eun;Lim, Kyu-Sang;Lee, Seung-Su
    • Journal of Life Science
    • /
    • v.26 no.8
    • /
    • pp.904-910
    • /
    • 2016
  • Complex traits are determined by the combined effects of many loci and are affected by gene networks or biological pathways. Systems biology approaches have an important role in the identification of candidate genes related to complex diseases or traits at the system level. The gene network analysis has been performed by diverse types of methods such as gene co-expression, gene regulatory relationships, protein-protein interaction (PPI) and genetic networks. Moreover, the network-based methods were described for predicting gene functions such as graph theoretic method, neighborhood counting based methods and weighted function. However, there are a limited number of researches in livestock. The present study systemically analyzed genes associated with 102 types of economic traits based on the Animal Trait Ontology (ATO) and identified their relationships based on the gene co-expression network and PPI network in cattle. Then, we constructed the two types of gene network databases and network visualization system (http://www.nabc.go.kr/cg). We used a gene co-expression network analysis from the bovine expression value of bovine genes to generate gene co-expression network. PPI network was constructed from Human protein reference database based on the orthologous relationship between human and cattle. Finally, candidate genes and their network relationships were identified in each trait. They were typologically centered with large degree and betweenness centrality (BC) value in the gene network. The ontle program was applied to generate the database and to visualize the gene network results. This information would serve as valuable resources for exploiting genomic functions that influence economically and agriculturally important traits in cattle.