• Journal of Korea Society of Industrial Information Systems
• /
• v.28 no.4
• /
• pp.35-43
• /
• 2023

In next-generation electric vehicles, research is being conducted on an in-wheel motor system that directly controls torque by each wheel to improve total cost and driving performance. Accordingly, in this paper, a study was conducted on an algorithm that distributes the torque applied to each wheel in a torque vectoring system applied to an in-wheel motor for driving an electric vehicle. In order to implement a vehicle model that applies actual vehicle characteristic parameters according to vehicle driving and steering, a simulation was conducted in the MATLAB Simulink environment, and it was confirmed that torque distribution was performed according to the proposed algorithm.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.396-397
• /
• 2019

본 논문은 유한요소 모델예측제어(FCS-MPC)의 샘플링 시간을 가변하여 표면부착형 영구자석 동기 전동기(SPMSM)의 토크 리플을 개선하고 스위칭 손실을 저감하는 가변 샘플링 시간이 적용된 모델예측제어 기법을 제안한다. 기존 FCS-MPC는 토크 리플을 저감하기 위해 고정 샘플링 시간을 짧게 설정하였다. 고정 샘플링 시간을 짧게 설정함에 따라, 전압벡터의 변경횟수가 증가하여 스위칭 손실이 증가하였다. 본 논문은 이러한 문제점을 해결하기 위해 가변 샘플링 시간이 적용된 FCS-MPC를 통해 토크 리플을 저감하고, 전압벡터의 변경횟수를 감소시켜 스위칭 손실을 저감하였다. 본 논문에서 제안하는 기법은 시뮬레이션을 통해 증명되었다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.12
• /
• pp.2618-2624
• /
• 2009

Harmonics (or distortion in wave form) has always existed in electrical power systems. It is harmless as long as its level is not substantial. However, with the recent rapid advancement of power electronics technology, so-called nonlinear loads, such as variable frequency drives for motor power/speed control, are increasingly finding their way to shipboard or offshore applications. In this paper a new approach to direct torque control (DTC) of induction motor drive is presented. In comparison with the conventional DTC methods the inverter switching frequency is constant and is dramatically increased, requiring neither any increase of the sampling frequency, nor any high frequency dither signal. The well-developed space vector modulation technique is applied to inverter control in the proposed DTC-based induction motor drive system, thereby dramatically reducing the current harmonics. As compared to the existing DTC approach with constant inverter switching frequency, the presented new approach does not invoke any concept of deadbeat control, thereby dramatically reducing the computations.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.3
• /
• pp.250-256
• /
• 2014

EV(Electric Vehicle) has many benefits such as prevention of global warming and so on. But due to driving source changing from combustion engine to battery and e-motor, new R&D difficulties have arisen which changing of desired vehicle performance and multidisciplinary design constraints by means of strong coupled multi-physics domain problems. Additionally, dynamics performances of EV becomes more important due to increasing customer's demands and expectations for EV in compare with internal combustion engine vehicle. In this paper suggests model based development platform of EV through integrated simulation environment for improving analyse & design accuracy in order to solve multi-physics problem. This simulation environment is integrated by three following specialized simulation tools IPG CarMaker, AVL Cruise, DYMOLA that adapted to each purpose. Furthermore, control algorithm of TV(Torque Vectoring) system is developed using independent driven e-motor at rear wheels for improving handling performance of EV. TV control algorithm and its improved vehicle performances are evaluated by numerical simulation from standard test methods.

• Tribology and Lubricants
• /
• v.28 no.3
• /
• pp.130-135
• /
• 2012

This study presents a new methodology for realtime tool breakage detection by sensor fusion concept of two hall sensor and an acoustic emission (AE) sensor. Spindle induction motor torque of CNC Lathe during machining is estimated by two hall sensor. Estimated motor torque instead of a tool dynamometer was used to measure the cutting torque and tool breakage detection. A burst of AE signal was used as a triggering signal to inspect the cutting torque. A significant drop of cutting torque was utilized to detect tool breakage. The algorithm was implemented on a NI DAQ (Data Acquisition) board for in-process tool breakage detection. The result of experiment showed an excellent monitoring capability of the proposed tool breakage detection system. This system is available tool breakage monitoring through internet also provides this system's user with current cutting torque of induction motor.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.10
• /
• pp.184-193
• /
• 2001

In vector control technique, stator currents of an induction motor are transformed to equivalent d-q currents in a reference frame consist of d and q axis, each of which is coincide with flux and torque direction respectively. Since the current in q-axis is related to the torque in a synchronously rotating frame, torque is estimated as a function of q-axis current and flux. In this paper, a method to estimate torque of an induction motor based on the measurement of 3-phase currents and rotating velocity of a rotor is presented. Graphic-programming is used to measure signals, to estimate the torque and to show the result in the form of user friendly graph in window environment. To stabilize the fluctuation of estimated torque caused from the small measurement error of the rotor velocity, the stator current is reconstructed in a program based on measured signals. The experimental results executed under the velocity of 500 rpm, 1500 rpm without load and 1500 rpm with load show that the proposed method estimates the torque very well.

• Proceedings of the KIEE Conference
• /
• 2003.04a
• /
• pp.149-153
• /
• 2003

AC 부하를 갖는 동기전동기에 있어서, 동기전동기의 속도리플을 저감시키기 위한 문제를 풀기위해 3가지 제어기법에 대해 비교를 한 후 가장 강인한 제어기법에 대해 분석하였다. AC 부하를 갖는 특별한 제어 대상으로 엑스선 전산화 단층촬영 장치(CT)용 겐트리를 선정하였으며 시스템이 갖는 특별한 구조에 의해 이러한 시스템 특성을 갖는다. 동기전동기의 출력 축에 링(Fing) 모양의 원판 프레임을 갖으며, 이 원판 표면에 무게가 서로 다른 여러 장치(X_선 튜브, X-선 검출기, 고압발생장치, DAS 장치, 온도조절장치 등)를 부착하여 영상 획득 시스템의 회전부를 구축하기 때문이다. 이러한 시스템에서는 무게 평형을 갖지 못하는 편심 무게가 존재하게 되며 이로써 전동기 관점에서는 AC 부하처럼 인식되는 제어 조건으로 인식 될 수 있다. AC 부하를 갖는 동기전동기에 대해 일반적인 벡터제어 알고리즘으로 제어를 수행하면 정상상태에서도 속도 오차가 "0" 으로 줄어들지 않고 AC 형태의 오차 성분이 존재하며 편심 무게의 크기에 비례하여 진폭이 커지는 특성을 갖는다. 이러한 문제점을 해결하기 위하여 Sine파 보상전류를 갖는 속도제어기법, 펀심부하토크 관측기를 이용한 속도제어기법, 그리고 기준모델제어기법을 소개하였다. 각 방법에 대한 실험 결과로부터 편심무게의 변동과 편심 위치의 변동 조건에서 기준모델제어기법이 강인한 제어 특성과 리플저감 측면에서 가장 우수함을 검증하였다. 이로써 AC 부하 조건에서 고정도 속도 제어기가 요구되는 경우 좋은 선택의 지침이 될 수 있다고 본다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.7
• /
• pp.937-943
• /
• 2013

An independently driven electric corner module cannot be applied to an actual vehicle without some difficulty, because of vehicle safety problems in the case of malfunctions and degraded ride and handling performance owing to the increase in the unsprung mass. In this study, a simulator is developed to evaluate the vehicle driving performance in order to solve ride and handling problems. Component modeling of a small-sized electric vehicle with an independently driven electric corner module is performed using MATLAB/Simulink. The vehicle is modeled by using CarSim, which can be used to analyze the vehicle maneuvers with 27 DOFs. The control algorithm for the improvement of vehicle driving safety and ride and handling performance is validated by using the developed simulator.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.5
• /
• pp.1095-1101
• /
• 2012

This paper presents a design of a BLDC servo motor control system for the auto process of assembly and supply using DSP(Digital Signal Processor) controller and IGBT driver. The assembly and supply auto processing system needs torque, speed, position control of servo motor for variable action. This paper implements those servo control with vector control and space vector PWM(Pulse Width Modulation) technique. As CPU of controller, TMS320F240 DSP was adopted because it has PWM waveform generator, A/D converter, SPI(Serial Peripheral Interface) port and many input/output port etc. This control system consists of 3-level hierarchy structure that main host PC manages three sub DSP system which transfer downward command and are monitoring the states of end servo controllers. Each sub DSP system operates eight BLDC servo controllers which control BLDC motor using DSP and IPM. Between host system and sub DSP communicate with RS-422, between main processor and controller communicate with SPI port.

• Journal of KIISE:Computer Systems and Theory
• /
• v.29 no.6
• /
• pp.307-317
• /
• 2002

In this paper we propose a new mesh reconstruction scheme that produces a displaced subdivision surface directly from unorganized points. The displaced subdivision surface is a new mesh representation that defines a detailed mesh with a displacement map over a smooth domain surface, but original displaced subdivision surface algorithm needs an explicit polygonal mesh since it is not a mesh reconstruction algorithm but a mesh conversion (remeshing) algorithm. The main idea of our approach is that we sample surface detail from unorganized points without any topological information. For this, we predict a virtual triangular face from unorganized points for each sampling ray from a parameteric domain surface. Direct displaced subdivision surface reconstruction from unorganized points has much importance since the output of this algorithm has several important properties: It has compact mesh representation since most vertices can be represented by only a scalar value. Underlying structure of it is piecewise regular so it ran be easily transformed into a multiresolution mesh. Smoothness after mesh deformation is automatically preserved. We avoid time-consuming global energy optimization by employing the input data dependant mesh smoothing, so we can get a good quality displaced subdivision surface quickly.