• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.7
• /
• pp.479-487
• /
• 2022

This paper presents the control and guidance algorithm of a KAU-SPUAV(Korea Aerospace University - Solar Powered Unmanned Aerial Vehicle) which is designed and developed in Korea Aerospace University. Aerodynamic coefficients are calculated using the vortex-lattice method and applied to the aircraft's six degrees of freedom equation. In addition, the thrust and torque coefficients of the propeller are calculated using the blade element theory. An altitude controller using thrust was used for longitudinal control of KAU-SPUAV to glide efficiently when it comes across the upwind. Also describes wind estimation technic for considering wind effect during flight. Finally, introduce some guidance laws for endurance, mission and coping with strong headwinds and autonomous landing.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.1
• /
• pp.80-88
• /
• 2003

In this paper, the new robust torsional vibration suppression control scheme is proposed for the two mass system. A reduced order state feedback controller where the motor speed and the observed torsional torque are fed back and the PI controller are proposed as the torsional vibration suppression controller. Using the estimated mechanical parameters by off-line RLS(Recursive Least Square) algorithms, the speed controller for torsional vibration suppression is designed and its gains are determined using the Kharitonov robust control theory. The Kharitonov robust control theory can obtain the robust stability with a specified stability margin and a damping limit and the good performance of vibration suppression although if the parameters are varied within some specified limit. The effectiveness and usefulness of the proposed schemes are verified with the simulation and the experimental results on the fully-digitalized 5.5kW two mass system.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.1
• /
• pp.80-85
• /
• 2011

This paper presents the design of the power-assisted controller for the in-wheel type smart wheelchair by using torque estimation that is predicted by relationship between input voltage and output wheel angular velocity. Nowadays, interest of the moving assistant aids is increased according to the increase in population of the elderly and the handicapped person. However some of the moving assistant aids have problems. For example, manual wheelchair has difficulty moving at the slope, because users lack the muscular strength of their arm. In electric wheelchair case, users should be weak by being decreased muscles of upper body. To overcome these problems, power-assisted electric wheelchair are proposed. Most of the power-assisted electric wheelchair have the special rims that can measure the user's power. In here, the rims have to be designed to install the sensors to measure user's power. In this paper, we don't design the rim to measure the man power. To predict the man power, we propose a control algorithm of the in-wheeled electric wheelchair by using torque estimation from the wheel. First, we measure the wheel velocity and voltage at the in-wheel electric wheelchair. And then we extract driving will forces by using proposed mathematical model. Also they are applied at the controller as the control input, we verify to be able to control in-wheel type smart wheelchair by using simulation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.12
• /
• pp.8187-8194
• /
• 2015

To accelerate a heavy roller coaster train with over 1G force, a lot of thrust is required and linear synchronous motor(LSM) as propulsion method is suitable for this kind of system. To increase the propulsion efficiency of LSM, precise and real-time position information of vehicle is required for accurate phase control. However, the discontinuous position information with relatively long time interval is usually transmitted from the hall-sensors on the track every magnet length. In this paper, the basic motor model based on traditional dq-axis equations is described and the motor dynamic model is produced by considering the cogging force and friction loss. To improve the position accuracy, the position estimator is also proposed for LSM control system. Simulations were performed to check the characteristics of the torque control system which includes the position estimator based on the motor model. Simulation results based on the linearized model show that this control system has an enough bandwidth and phase margin and the executed algorithm achieves an ideal effect to follow the real-time position signal. Therefore, the feasibility of position estimator is also confirmed.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.42 no.1
• /
• pp.29-34
• /
• 2005

The wound induction motor can provide high starting torque and reduced starting current simultaneously by inserting large resistor externally when starting. And this technique is one of the well known methods among the induction motor starting methods and generally used for heavy load starting such as crane and cement factories. The conventional PI controller has been widely used in industrial application due to the simple control algorithm and is generally used for control of current torque, position, and speed for the wound induction motor drive system. However, the conventional control system for wound induction motor may result in poor performance because sensors have to be used but are often limited by the environmental condition. Recently, to overcome these problems, many sensorless vector control methods for the wound induction motor have been studied. This paper presents a MRAS method for sensorless vector control of the wound induction motor drive. In the conventional MRAS method, in low frequency, the stator resistance variation may result in poor performance. Therefore, this paper presents a MRAS method with stator and rotor resistance tuning for sensorless vector control of the wound induction motor to overcome several shortages of the conventional MRAS caused by parameter variation and to enhance the robustness of the sensorless vector control. The validity and effectiveness of the proposed method is verified through digital simulation.

• Journal of IKEEE
• /
• v.1 no.1 s.1
• /
• pp.64-72
• /
• 1997

Since the average speed calculated with encoder pulses inevitably has time delay, the control performance as well as the system stability is deteriorated. especially at the low speed region. Additionally, the distorted inverter output voltage due to the dead time effects and the forward voltage drops of the VSI (Voltage Source Inverter) causes torque ripples and their effects are more severe at the low speed operation of an induction motor. In this paper, an accurate speed estimation method using Kalman Filter Algorithm is presented to improve the performance of an induction motor speed control with a low precision encoder at low speed legion. The dead time effects and the forward voltage drops of the VSI are feedforwardly compensated to produce an exact inverter output voltage.

• Korean journal of applied entomology
• /
• v.59 no.2
• /
• pp.93-107
• /
• 2020

Adults of seven noctuid potential pests (Spodoptera frugiperda, S. litura, S. exigua, Ctenoplusia agnata, Mythimna loreyi, Athetis dissimilis, and A. lepigone) of soybean and maize in Suwon, Korea were identified by their morphological characteristics in the wing pattern and male genitalia and partial mitochondrial DNA sequences of cytochrome c oxidase subunit 1 gene. The generation number of adults that emerge annually in six species (except A. lepigone) was estimated from the data on density fluctuations of adults caught in sex pheromone traps in 2019 and the forecasted data using temperature-associated development and reproduction models for those species. S. frugiperda adults were caught from July 27th to October 31st in 2019, and hence were initially estimated to emerge three times per year. But, it was finally expected that S. frugiperda adults could possibly emerge a total of four times per year in Suwon, considering larval emergence observed during mid- and late June in other areas. Adult emergence of S. litura, S. exigua, C. agnata, and M. loreyi in 2019 was observed from May 29th to November 6th, from May 14th to November 6th, from May 26th to October 25th, and from May 31st to November 23rd, respectively. Annual adult emergence of these four species was estimated as at least four times. Adults of A. dissimilis were caught from May 26th to September 11th in 2019, and adult emergence was estimated at only twice per annum. It was postulated that the first adult populations of five species except the two Athetis species were probably migrated from other areas.

• Journal of the East Asian Society of Dietary Life
• /
• v.19 no.6
• /
• pp.1049-1053
• /
• 2009

This study was carried out to investigate the effects of Eucommia ulmoides Oliver (Du-Zhong) as a main ingredient in a mixture of various medicinal herbal extracts on blood pressure, serum lipid concentrations, and hematological variables in hypertensive patients. After 4 weeks on drinking the mixed medicinal herbal teas, systolic blood pressure remarkably decreased from 167.14 to 134.86 mmHg and diastolic blood pressure decreased from 100.00 to 87.10 mmHg. In terms of serum lipid profiles, there were no differences in total-cholesterol, HDL-cholesterol, LDL-cholesterol level, and atherogenic index, However, the level of triglycerol was significantly reduced from 237.1 before the experiment to 145.00 mg/dL after 4 weeks on drinking the mixed medicinal herbal teas. Serum triglyceride were remarkably reduced from 237.1 to 145.00 mg/dL in the hypertensive patients who had taken the combined medicinal herbal extracts. Compared with data obtained from the patients before the experiment, there were no differences in hematological variables (RBC, WBC, hematocrit, hemoglobin, platlets and homocysteine) after the 4 weeks experiments, but mean corpuscular hemoglobin concentration was significantly increased by 2.70% (p<0.05) in the blood samples. Based on these findings, it can be presumed that the examined mixed medicinal herbal tea may be effective in lowering blood pressure and in increasing mean corpuscular hemoglobin concentration due to reduced serum triglyceride levels in hypertension patients.

• Journal of fish pathology
• /
• v.23 no.3
• /
• pp.281-291
• /
• 2010

Crytocaryon irritans infection of rock bream was investigated in embankment fish farm from July to December 2009. Prevalence variation was 20.0~88.0% that was high in september and was low in July. While no mortality was found in July and August, it occurred after mid september. Environmental conditions during the survey period were water temperature $19.3{\sim}24.3^{\circ}C$, dissolved oxygen $5.0{\sim}7.1\;mg\;L^{-1}$ and salinity 31.9~33.7 psu, and the water temperature during mortality season was $24.0^{\circ}C$. External symptom of the rock bream was secretion mucus but swimming showed fine in the early infected period. While, the symptoms in the severe outbreak season were excess of mucus, falling off tail and congestion, bleeding spot the surface and weakened swimming. We observed free living and parasitic stages in the gills and body surface of rock bream. Hepato somatic index (HSI) was $1.9{\pm}1.1{\sim}3.5{\pm}1.7%$, which was low in the September being mortality season but was high in November. The percentages of hematocrit infected with Crytocaryon irritans were 37.3% and 41.0% in July and August, respectively while they gradually decreased to 32.1% and 24.2% in september and October, respectively. Total cholesterol and Triglyceride values rapidly decreased by October. After mortality, AST and ALT were 7 and 5 folds higher compared to non-mortality season.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.530-534
• /
• 2006

조류발전은 조류 유속이 빠른 곳에 수차발전기를 설치하여 해수의 운동에너지로부터 전기를 생산하는 발전방식이다. 2001년부터 해양연구원에서는 울돌목의 우수한 조류발전 개발 여건을 바탕으로 조류에너지 실용화 기술을 개발하고 있다. 본 연구에서는 조류발전 시스템에 사용되는 헬리컬 수차의 효율을 현장실험을 바탕으로 판단하고자 하였다. 현장실험을 위하여 지름 2.2 m, 높이 2.5 m의 수차를 제작하고, 울돌목 협수로의 한 쪽 면에 쟈켓구조물을 설치하여 수차를 거치한다. 수차가 회전함에 따라 회전봉에 일정 마찰을 주어 토크와 RPM을 측정하고, 함께 측정된 유속자료를 이용하여 수차를 효율을 산정한다. 유속-수차효율, TSR(수차의 날개속도와 유속의 비)-수차효율의 상관관계로 실험결과를 고찰하였다. 1중 날개 수차인 경우에 유속 1.4에서 2.6 m/s 사이에서 최대효율이 30 - 35 % 정도였고, 2중 날개 수차에 대한 실험에서는 유속 1.4에서 2.6 m/s 사이에서 최대수차효율이 25 - 35 % 사이임을 알 수 있었다. TSR과 최대수차효율의 상관관계는 실험 case별로 조금씩 다르다. 전체적으로 1중 날개의 경우가 최대수차효율에서 2중 날개보다 TSR 값이 조금 큰 경향을 나타냄을 알 수 있다. 이것은 1중 날개가 2중 날개보다 가벼워 좀 더 큰 RPM을 발생시켜서 나타난 현상으로 생각된다. 현재의 실험결과들을 이용하여 TSR과 최대수차효율을 상관관계를 나타내는 모델식을 도출하였다. 현장시험결과를 종합하면, 현장조류발전 시설이 최소 600 kW의 전력이 생산되기 위해서는 지름 3 m, 높이 3.6 m 인 수차 3개가 하나의 축에 설치되어야하는 것으로 계산되었다. 정격유속이 4.8 m/s이고 수차의 지름이 3m 라면, 최적 전력발생시의 RPM은 1중 날개의 경우 79이고 2중 날개의 경우는 63정도임을 추정할 수 있었다.촬영하여 실시간으로 전송하기 때문에 홍수시 하천 상황에 대한 모니터링 목적으로 사용될 수 있다. 영상수위계는 우물통 등을 이용하는 기존 방법과 비교하여 구조물이 필요 없어 설치 비용이 저렴하고, 영상에 의한 하천 모니터링 기능을 자체적으로 가지고 있기 때문에 효율적이라고 할 수 있다.따른 4개의 평가기준과 26개의 평가속성으로 이루어진 2단계 기술가치평가 모형을 구축하였으며 2개의 개별기술에 대한 시범적용을 실행하였다.하는 것으로 추정되었다.면으로의 월류량을 산정하고 유입된 지표유량에 대해서 배수시스템에서의 흐름해석을 수행하였다. 그리고, 침수해석을 위해서는 2차원 침수해석을 위한 DEM기반 침수해석모형을 개발하였고, 건물의 영향을 고려할 수 있도록 구성하였다. 본 연구결과 지표류 유출 해석의 물리적 특성을 잘 반영하며, 도시지역의 복잡한 배수시스템 해석모형과 지표범람 모형을 통합한 모형 개발로 인해 더욱 정교한 도시지역에서의 홍수 범람 해석을 실시할 수 있을 것으로 판단된다. 본 모형의 개발로 침수상황의 시간별 진행과정을 분석함으로써 도시홍수에 대한 침수위험 지점 파악 및 주민대피지도 구축 등에 활용될 수 있을 것으로 판단된다. 있을 것으로 판단되었다.4일간의 기상변화가 자발성 기흉 발생에 영향을 미친다고 추론할 수 있었다. 향후 본 연구에서 추론된 기상변화와 기흉 발생과의 인과관계를 확인하고 좀 더 구체화하기 위한 연구가 필요할 것이다.게 이루어질 수 있을 것으로 기대된다.는 초과수익률이 상승하지만, 이후로는 감소하므로, 반전거래전략을 활용하는 경우 주식투자기간은 24개월이하의 중단기가 적합함을 발견하였다. 이상의 행태적 측면과 투자성과측면의 실증결과를 통하여 한국주식시장에 있어서 시장수익률을 평균적으로 초과할 수 있는 거래전략은 존재하므로 이러한 전략을 개발 및 활용할 수 있으며, 특히, 한국주식시장에 적합한 거래전략은 반전거래전