Proceedings of the Korean Vacuum Society Conference
/
2014.02a
/
pp.261.1-261.1
/
2014
지구상에 존재하는 모든 생물에 의해 배출되는 이산화탄소는 온실가스로써 산업혁명 이후 급격한 농도 증가로 인해 지구 온난화 등의 다양한 환경문제를 초래하고 있다. 지구 온난화의 가시화로 인한 각종 기후 협약 및 탄소배출권 등에 규제로 온실가스 감축의무부과가 확실해져 탈 석유기반 사회로 전환을 위한 이산화탄소를 처리하는 다양한 연구가 각국에서 활발히 진행 중이다. 본 연구에서 마이크로웨이브 플라즈마 토치를 이산화탄소 분해에 이용하게 되었고 그 목적은 이산화탄소가스를 마이크로웨이브로 가열하여 순수한 이산화탄소 플라즈마 토치를 발생함으로서 지구 온난화의 주범인 이산화탄소를 생산적으로 이용하기 위한 것으로 전자파를 발진하는 마그네트론으로는 3kW, 2.45GHz의 주파수를 사용한다. 마이크로웨이브 플라즈마 토치를 이용한 이산화탄소의 분해 시 생성되는 물질을 확인하기 위하여 이산화탄소의 열역학적 평형을 계산하였으며 또한 이산화탄소의 분해 반응의 준 평형상태에서의 속도상수를 이용하여 각 분해반응생성물들의 밀도비율을 계산하였고, 이를 일반화시켜 도시하였다. 위 과정을 통해 고온의 이산화탄소 토치는 탄화수소 연료를 1기압에서 개질할 수 있음을 알 수 있다. 예를 들어 메탄개질은 $CO_2+CH_4{\rightarrow}2CO+2H_2$의 반응식이 된다. 이때 엔탈피와 엔트로피 변화는 각 각 ${\Delta}H=247kJ/mole$과 ${\Delta}S=257J/mole/deg.$이며 이 반응에 대한 gibbs 자유에너지는 $G={\Delta}H-T{\Delta}S$로서 개질 자발반응이 일어나는 온도는 $T={\Delta}H/{\Delta}S=961K$가 된다. 그리고 탄화수소 개질에 참여하는 산소와 CO 라디칼의 밀도가 대단히 높다. 따라서 메탄개질은 이산화탄소 토치를 통하여 1기압에서 쉽게 이루어진다.
Journal of the Korean Society of Propulsion Engineers
/
v.20
no.6
/
pp.101-112
/
2016
The characteristic analysis and fundamental test of a plasma generator is performed for drag reduction of a high speed vehicle. In high pressures, thermal plasmas is suitable for generating plasmas. The appropriate plasma torch is selected and used to generate thermal plasmas. The plasma torch, which can emit high-speed and high-pressure plasma jet, is suitable for generating plasma counterflow jet. In this study, the fundamental test and analysis for the plasma torch is summarized. Results show that supplying gas pressures and electrode gap of plasma torch are considered as critical parameters for generating plasma jets.
최근 에너지 사용이 획기적으로 증가함에 따라 효율적인 에너지 사용이 필요하게 되었다. 특히 건물에서 벽체보다 에너지 손실이 많이 발생하는 창호의 경우 단열성능이 좋은 고효율 진공유리의 사용이 절실하나, 가격 및 성능 등의 문제로 보급화가 늦어지고 있는 실정이다. 본 연구에서는 저가형 고효율 진공유리 개발을 위한 기초 연구로써 유리 용접용 수소-산소 혼합가스 토치 개발하기 위한 열해석을 수행하였다. 주로 토치의 형상, 노즐 배치 및 직경 변경을 통한 토치 최적화를 수행하였다.
본 연구에서는 자장인가방식의 계단형 구조를 가지는 비이송식 플라즈마 토치를 설계 제작하여 토치의 전극 구조가 열플라즈마의 안정성에 미치는 영향을 진단하고 원통형 구조를 가지는 표준형 토치와 비교 분석하였다. 운전 변수인 전극 간격, 전류, 아크기체의 유량 변화에 따른 아크전압의 특성을 살펴보고, 설계 변수인 전극 구조에 따른 아크의 동적 특성 실험을 통해 열플라즈마의 특성에 미치는 영향을 실험적으로 규명 하였다.
Transactions of the Korean Society of Mechanical Engineers B
/
v.39
no.2
/
pp.125-134
/
2015
This is the third paper on the combustion characteristics of the landfill gas in a constant volume combustion chamber for a large displacement volume commercial engine. It is the first in this series to discuss the effects of the torch device on combustion. The results show that an optimum orifice ratio exists regardless of the torch volume, and a few adverse effects on the combustion are observed for an excessively small orifice ratio. In addition, the torch ignition decreases the initial burn duration, and the decrease in the heat transfer caused by this decreased duration contributes to an increase in the peak combustion pressure. Finally, the torch mostly plays a positive role in shortening the main burn duration when the combustion condition is worsened by a lower methane fraction. Yet, the torch decreases the initial burn duration rather than the main burn as the methane fraction increases.
Journal of the Korea Academia-Industrial cooperation Society
/
v.10
no.11
/
pp.3074-3079
/
2009
Efficient energy use becomes necessary since energy consumption has dramatically been increasing due to continuous economic development and population growth. In particular, high efficient vacuum glazing needs to be introduced to buildings where enormous energy loss occurs through windows and has been rarely used yet due to its high price and performance. Therefore, in this study, torch for glass welding was developed with CFD(Computational Fluid Dynamics) and experiments. Torch shape, nozzle diameter, nozzle arrangement etc. were mainly optimized and hydrogen-oxygen mixed gas fuels the torch. Finally, glass welding with the developed torch has been successful, showing that it can be used to develop economic vacuum glazing.
Seo, Jun-Ho;Lee, Mi-Yeon;Kim, Min-Ho;Nam, Jun-Seok;Kim, Dong-Uk
Proceedings of the Korean Vacuum Society Conference
/
2013.08a
/
pp.322-322
/
2013
$CO_2$를 $CH_4$와 열 및 전기화학적인 반응을 통해 고농도의 CO 및 $H_2$로 구성된 합성가스로 효율적으로 전환시키기 위해, 반응가스 주입용 간극형 노즐을 가진 비이송식 직류 열플라즈마 토치 시스템을 설계, 제작하고 다양한 조건에서 이 두 가스의 개질 실험을 수행하였다. 설계 제작된 간극형 노즐과 리액터 내 고온 반응 영역을 활용한 $CO_2$ 및 $CH_4$ 반응가스의 효율적인 처리를 통하여, 최고 70% 이상의 $CO_2$ 및 $CH_4$의 전환율과 최고 80% 이상의 CO 및 $H_2$선택도를 달성할 수 있음을 확인하였다. 또한, 상기 조건의 경우, 플라즈마 입력 전력 10.6 kW 대비 49 lpm 의 반응가스 처리량을 통하여 얻은 것으로 최고 2.5 mmol/kJ 이상의 Specific Energy Requirement (SER) 조건도 만족할 수 있음을 보였다. 특히, 제안된 막대 음극-반응 가스 주입구를 가진 양극 노즐 플라즈마 토치의 경우, $CH_4$ 반응가스를 음극에 직접 닿지 않도록 간극을 통해 주입하게 함으로써, 반응 가스 분해에 의한 음극 등 전극 부식을 최소화하면서도 고에너지 전자가 풍부한 아크 컬럼에 의해 $CO_2$ 및 $CH_4$의 전환 반응을 효율적으로 일으킬 수 있어 효율적인 $CO_2$ 및 $CH_4$ 개질을 위한 열플라즈마 토치 시스템의 개발이 기대된다.
Kim, Chae-Hyoung;Jeung, In-Secuk;Choi, Byoung-Il;Kouchi, Toshinori;Masuya, Goro
Proceedings of the Korean Society of Propulsion Engineers Conference
/
2011.04a
/
pp.363-366
/
2011
Mixing and combustion experiments with a vent slot mixer were performed in Mach 2 supersonic wind tunnel. Helium and hydrogen gases each were used for the mixing and the combustion experiment with a plasma jet (PJ) torch. The vent slot mixer holds plenty of fuel in the downstream mixing region, even though the fuel is transversely injected. In case of the combustion, the injected fuel is ignited by the PJ torch, and then unburned mixture is burned by shock-induced combustion downstream. Thermal choking in the combustor leads to shock trains in the isolator, causing the unstable combustion.
Proceedings of the Korean Vacuum Society Conference
/
2012.08a
/
pp.179-179
/
2012
국내에는 나노 분말 제조를 위한 RF 열플라즈마 시스템 제조 기술이 확보되어 있지 않고, 또한 나노 파우더 제조를 위한 공정 기술 역시 외국 업체에 전적으로 의존하고 있다. 본 연구에서는 나노 분말 제조를 위한 RF 열 플라즈마 토치 시스템 개발과 고품질의 나노 파우더 합성 공정 기술을 확립하여 필요 기관에 제공하는데 있다. 80 kW RF Plasma torch system의 설계 및 제작을 위해 플라즈마 Simulator인 CFD-ACE+를 이용하여 플라즈마 토치 및 반응로 내의 온도 분포, 유체 유동, 열전달 등의 해석을 통해 플라즈마 토치 및 반응로의 반경 및 길이, 구조의 설계 값을 도출하여 반응로를 설계하여 RF 파워, RF 플라즈마 토치(Torch), 반응기(Reactor), 사이클론(Cyclone), 포집부(Collector), 열교환기 및 진공배기 시스템으로 구성하였다. Si 나노 소재의 경우, 이차전지 음극재에 적용이 가능한 대표적인 소재로서 높음 비용량과 충/방전시 부피팽창을 감소시킬 수 있어 이차전지의 고용량 구현을 위해서는 가장 중요한 소재중 하나로 많은 관심 재료로 평가 받고 있다. 따라서 본 연구에서는 상용화된 Si 원료 powder를 사용하여 고상 분체 공급 장치를 통하여 고온의 플라즈마를 통과시켜 기상화 및 결정화과정을 통해 Si 나노분말을 제조하였다. 공정 변수로서 공정압력 및 플라즈마 power, Gas의 변화량에 따른 나노 분말의 제조 특성에 대한 실험을 진행한 후 제조된 나노 분말을 비표면적측정(BET) 및 SEM 측정 결과 분석을 통하여 시스템 특성을 파악하였으며 제조된 Si 나노 파우더는 이차전지 음극재로서 770 mAh/g의 용량과 93%@50 cycle 수준의 유지율을 나타내었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.