• Geotechnical Engineering
• /
• v.5 no.4
• /
• pp.5-16
• /
• 1989

This paper statistically analyses the freezing soil by frost group and frost depth in Korea with data from soil testing in the Korea National Housing Corporation, the climate data provided by the Central Weather Office and the data on the frost depth from the National Construction Laboratory Institute. In this paper, freezing variable are analysed such as percentage finer than 0.02 m by weight, plasticity index, freezing index, water contents of soil and frost depth etc‥‥ The result of the analysis is as follows. 1) The frost depth of Korea depends on the properties of soil rather thank the characte fistic of area. 2) The distribution map of design freezing index in 57 cities is drawn up with the maxi- mum freezing index, during past 14 years, calculated by the average of the air temperature observed four times(03 : 00.09 00, 15 : 00, 21 : 00) a day. 3) By correcting the OLS line estimated from the relationship between freezing index and frost depth, a method of utlizing the line with the upper confidence limit of 99.9% int-distribution as predicted maximum frost depth is newly introduced.

• Journal of Forest and Environmental Science
• /
• v.15 no.1
• /
• pp.98-106
• /
• 1999

This study was carried out to analyze the mechanical properties of soil for counterplan of recovery construction and the slope stability on fill slope of Sang-gul forest road in Mt. Gari. To analyze the mechanical properties of apparent soil on fill slope in forest road, various soils such as soil, gravelly sandy soil, weathered rock were used as experimental sample in this study. In each experimental sample, particle size distribution test, liquid limit test, plastic limit test, and specific gravity test were carried by Korean industrial standards(KS F 2302, KS F 2303, KS F 2304, KS F 2306, KS F 2308). Through the results of soil particle size distribution analysis, soil moisture content analysis, and specific gravity analysis, soil texture, uniformity coefficient, curvature coefficient, dry density and specific gravity were able to be determined in sampling site. As a results in this study, soil was classified as SP, SW, GP by Unified Soil Classification Standard (USCS). specific gravity and dry unit weight of soil have the value range of 2.52~2.60 and 1.39~1.43, respectively. Also plastic index showed non plastic condition.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6C
• /
• pp.367-377
• /
• 2008

As part of study to develop LRFD (Load and Resistance Factor Design) codes for foundation structures in Korea, resistance factors for static bearing capacity of driven steel pipe piles were calibrated in the framework of reliability theory. The 57 data sets of static load tests and soil property tests conducted in the whole domestic area were collected and these load test piles were sorted into two cases: SPT N at pile tip less than 50, SPT N at pile tip equal to or more than 50. The static bearing capacity formula and the Meyerhof method using N values were applied to calculate the expected design bearing capacities of the piles. The resistance bias factors were evaluated for the two static design methods by comparing the representative measured bearing capacities with the expected design values. Reliability analysis was performed by two types of advanced methods: the First Order Reliability Method (FORM), and the Monte Carlo Simulation (MCS) method using resistance bias factor statistics. The target reliability indices are selected as 2.0 and 2.33 for group pile case and 2.5 for single pile case, in consideration of the reliability level of the current design practice, redundancy of pile group, acceptable risk level, construction quality control, and significance of individual structure. Resistance factors of driven steel pipe piles were recommended based on the results derived from the First Order Reliability Method and the Monte Carlo Simulation method.

• Korean journal of applied entomology
• /
• v.34 no.2
• /
• pp.120-126
• /
• 1995

This study investigated the soil oribatid mite community at planatations of the Korean white pine, planted in different years. The soil samples $(10\times10\times5cm)$ were taken monthly from Jun 1988 to July 1989, and soil microarthropods in th sample were extracted using the Tullgren funnel for 72 hors. The diversity indices decreased at the older plantation sites with the maximum point in January and the minimum in September. The richness indices showed the maximum point in June and the minimum in may. The dominance indices increased at the older plantation and showed the maximum point in April, May, the minimum in January. The indices of aggregation of Oribatid mites species showed concentrated distribution in the average 1.9. The older plantation, the more indices increase. The seasonal variation of th indices tended to be greatest in April, August and at lowest in January. The richness indices was positively correlated with shannon-wiener, evenness indices. The dominance, aggregation indices was negatively correlated with shannon, evenness, richness indices.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.418-418
• /
• 2023

가뭄은 농업, 환경 및 사회경제적인 조건에 영향을 미치는 주요 자연 재해로 우리나라는 2015년부터 지속적인 가뭄 상황을 겪고 있다. 지속된 가뭄으로 인해 토양의 수분함량이 변화하여 농작물의 생장 활동 등에 영향을 미쳐 수확량이 낮아질 수 있다. 토양수분은 경사나 토질 등 지형학적인 특성에 따라 민감하게 반응하는 수문인자로, 특성을 광역적으로 정확하게 판단하기 어렵기 때문에 고해상도 원격탐사 자료를 활용하여 토양수분의 거동을 파악하는 연구들이 진행되고 있다. 특히, Synthetic Aperture Radar (SAR) 관측은 작물과 기본적인 토양의 유전체 및 기하학적 특성에 민감하게 반응하기 때문에, 토양수분 및 농업적 가뭄 분석 연구에 활용되고 있다. 본 연구는 2025년 발사될 예정인 C-band SAR 수자원 위성 산출물인 토양수분을 적용한 농업적 가뭄지수산정 알고리즘 기법 개발 연구를 위하여, 수자원 위성과 제원이 비슷한 Sentinel-1 자료를 통해 산정된 토양수분을 활용하여 농업적 가뭄지수인 Soil Moisture Drought Index (SMDI)를 산정하고자 한다. 산정된 SMDI의 검증을 위해 지점 관측된 토양수분 자료와 비교하여 Receiver Operating Characteristic (ROC) 분석 및 error matrix 기법 등을 활용하여 산정된 농업적 가뭄지수의 지역적 적용성을 파악하고자 한다. SAR 자료 기반의 농업적 가뭄지수 산정 알고리즘을 개발함으로써, 향후 제공될 수자원 위성의 자료를 활용한 가뭄 분석 연구에 활용될 수 있을 것으로 판단된다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.12
• /
• pp.5957-5962
• /
• 2011

In this study, the values of the four kinds of cone factors($N_{kt}$, $N_{ke}$, $N_{{\Delta}u}$, and recently proposed $N_e$) and the soil properties, for the northeastern part of Shiwha area, were investigated. The measured and calculated undrained strengths, which have been obtained from the various experimental data, were compared with each other, and their relationship with the plastic index was also studied. The strength from the $N_{{\Delta}u}$ method was unexpectedly not reasonable and the higher values of cone factors were observed with the larger plastic index.

• Journal of Industrial Technology
• /
• v.35
• /
• pp.81-88
• /
• 2015

The single regression method was used to analyze the correlationship between the compression index with mechanical properties for reclaimed marine clays in the Gyeonggi coast of Korea. As results of performing regression analysis for 62 samples about reclaimed marine clays in the Gyeonggi coast of Korea, linear regression lines between compression index and natural water content, void ratio in situ, and liquid limit respectively were obtained. The changed properties of reclaimed soil due to disturbance during dredging and reclaiming could be investigated by comparing with the existing empirical correlation equations for the original ground where dredging was performed.

• The Journal of Engineering Geology
• /
• v.17 no.4
• /
• pp.545-554
• /
• 2007

Landslides is mainly induced by a heavy rainfall, earthquake ground motion, and some other factors like soil mechanics, morphological-geological factors etc. Since the starting point of the failure seemed to be originated at a construction site in the study, it is meaningful to find out the relationship between the landslide and the construction. For this study, the slope failure factor was examined carefully to see that the original natural slope had vulnerability and that the complex ground had unstability changed by construction. A field survey was conducted on the original ground surface and filled-up ground. A laboratory test was also conducted to determine the geomechanical properties of soil samples. 2D and 3D limit equilibrium analysis with changing groundwater level were conducted at the failure depth using a seismic refraction survey. The result shows that the factor of safety is similar stability under all condition, but unstable under saturated condition.

• Journal of the Korean Geosynthetics Society
• /
• v.16 no.3
• /
• pp.31-39
• /
• 2017

Applicability of Skempton's and Hansbo's equation for estimating strength incremental ratio of Korean marine clayey soil was analyzed. These empirical equations have been commonly applied to design soft ground improvement by, especially, staged loading method. Strength incremental ratios proposed by Skempton (1954, 1957) and Hansbo (1957) using field vane tests(FVTs), measured in Scandinavia depends on plasticity index and liquid limit. Although lean clay in Scandinavia can be classified as clay based on USCS, this soil contains no clay mineral because it was produced by the glacial grinding of rock, sometimes, called rock flour. On the contrary, plasticity indices of Korean marine clayey soils increase linearly with the percentage of clay fraction (% finer than $2{\mu}m$ by weight). Except for strength incremental ratios using $q_u/2$ values in the case of soils having a low plasticity, such as Incheon, Hwaseong and Gunsan soils, these values are in the range of 0.25 to 0.35, independently of the plasticity index, $I_p$.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.4
• /
• pp.295-307
• /
• 2002

In the Nakdong River plain a very thick clayey soils are covered widely. Since the early 1990's, some huge reclamation projects have been performed for the development of industrial and residential complexes and so on. Despite a large number of soil investigations have been carried out for the projects, the geotechnical properties have never been elucidated well, so that the settlements of the ground due to the mischaracterized properties were greatly underestimated. Therefore, it has been needed to evaluate definitely the characteristics of the clayey soils, particularly for the compressibility characteristics to help understand the settlement behavior. For the compressibility characteristics of the Pusan clays, physical index and consolidation tests were conducted on the reconstituted and undisturbed samples. Using the result of physical index, the Pusan clays could be divided into two different units, which have different depositional environments. According to the concepts of Burland (1990) and Nagaraj et. al. (1990), the intrinsic state line and field compression curve of the Pusan clays could be established. It could be found from their concepts that the Pusan clays are under the cemented and young normally consolidated state and largely consisted of two units. The cementation of the clays was as well identified by compression index ratio (Tsuchida et. al.,1991) and sensitivity (Leroueil et. al.,1983).