• Journal of the Korean Geotechnical Society
• /
• v.24 no.8
• /
• pp.13-23
• /
• 2008

The evaluation of soundness of pile is very important for the safety of super structure. In this paper, the HWAW(Harmonic Wavelet Analysis of Wave) method which is developed to determine phase and group velocities of waves is applied to evaluate integrity of pile non-destructivly. The proposed method can evaluate a soundness of pile and pile end condition which is very important factor for pile behaviour. To verity the applicability of HWAW method in non-destructive test for pile, the numerical simulation test using ABAQUS was performed. And the model pile was made and the proposed non-destructive pile tests were applied to evaluate soundness and end boundary condition of model pile in the air and soil box. Through a numerical simulation and model tests, it is shown that the HWAW method has good potential of applying to the evaluation of pile integrity.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.4A
• /
• pp.611-622
• /
• 2008

Nonlinear analyses have been carried out for both bridge piers and a bridge structure being repaired using a repair element in order to assess the post-repair seismic response of such structures. For this purpose, a simplified CFRP stress-strain model has been proposed. The analytical predictions incorporating the current developments correlate reasonably well with experimental results in terms of strength and stiffness. In addition, nonlinear dynamaic analyses have also been conducted for a bridge structure in terms of the created multiple earthquake sets to evaluate the effect of pier repair on the response of a whole bridge structure. In these analyses, potential plastic hinge zones of piers are virtually repaired by CFRP and steel jacketing. Comparative results prove the virtual necessity of performing nonlinear post-repair analyses under multiple earthquakes, particularly when the post-repair response features are required. In all, the present approaches are expected to provide salient information regarding a healthy seismic repair intervention of a damaged strcuture.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.11 no.1
• /
• pp.85-95
• /
• 2009

In urban areas, blast excavation adjacent to tunnels is carried out frequently. It is generally required to secure static and dynamic stability of nearby tunnel structures for any such activities. Although there is some national guidelines for static safety, there is little guides to risk zoning controling the dynamic behavior of the underground structures. In this study, impacts on the blast-induced vibration are investigated using numerical study. An attempt to define the restricted area of blast adjacent to subway tunnels was also made. Particular concerns were given to tunnel depth and ground types. By carrying out the parametric study on depth and ground patterns, the envelope of blast distance of which dynamic response on the lining is controlled under 1 cm/sec, is established. It is shown that the increase in depth has increased the required safety distance slightly until the distance of 3.5 times of the tunnel diameter. Despite small changes in safety distance, it can be generally said that the effects of depth and stiffness of the ground is not significant in controlling the particle velocity of the tunnel linings.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.6 no.2
• /
• pp.85-91
• /
• 1986

Fatigue life is an important consideration for the design of offshore structures in deep sea and in hostile environments. In this paper, the effect of the bandwidth of random stresses on the fatigue life estimation of fixed offshore structures is investigated. The dynamic analysis is carried out in the frequency domain by using the equivalent linearization technique. Fatigue damages are calculated by two stress cycle counting methods; i.e., the narrow band method and the wide band method using rainflow counting technique. Example studies are carried out for two different structures. Numerical results indicate that the wide band approach, which is more complex but theoretically more appropriate pridicts smaller values of fatigue damages compared with those by the narrow band approach for all seastate conditions. Such trend becomes more apparent for the cases of severe seastates where the bandwidth of random stresses becomes large.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.6A
• /
• pp.399-408
• /
• 2011

Development of smart sensors for structural health monitoring and damage detection has been advanced remarkably in recent years. Nowadays fiber optic sensors, especially fiber Bragg grating (FBG) sensors, have attracted many researchers' interests for their attractive features, such as multiplexing capability, durability, lightweight, electromagnetic interference immunity. In this paper, a damage detection approach of jacket-type offshore structures by principal component analysis (PCA) technique using FBG sensors are presented. An experimental study for a tidal current power plant structure as one of the jacket-type offshore structures was conducted to investigate the feasibility of the proposed method for damage monitoring. It has been found that the PCA technique can efficiently eliminate environmental effects from measured data by FBG sensors, resulting more damage-sensitive features under various environmental variations.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.93-93
• /
• 2022

최근 이상기후로 인하여 우리나라 산림에 태풍 및 국지성 호우가 빈번히 발생하고 있다. 이로 인해 사면재해가 많이 발생하고 있으며 그 중 호우로 인한 많은 양의 물과 함께 토석 및 부유물이 중력에 의해 경사면을 따라 흐름 형태를 보이는 토석류 재해는 속도가 매우 빠르고 파괴적이며 그 결과는 비참하기까지 하다. 더구나 인구밀도가 낮은 산지 계곡부 뿐만 아니라 도시지역에서도 토석류 재해가 빈번히 발생하며 국내 및 해외에서도 토석류에 의한 피해사례는 자주 볼 수 있다. 이러한 토석류 재해의 피해를 줄이고자 토석류의 유동성을 저감시키기 위한 대책구조물의 시공이 많이 이루어지고 있으며 최근에는 투과형 구조물 중 하나인 원통형 기둥구조물을 그룹 형태로의 시공하는 경우가 늘어나고 있다. 토석류와 대책구조물 간의 상호작용은 월류(overflow), 쳐오름(run-up), 역류(backwater) 등의 복잡한 흐름 거동을 보인다. 하지만 원통형 대책구조물에 대한연구가 많이 이루어져 있지 않고 대규모 실험 또한 비용이 많이 소요되고 실행하기도 어렵다. 이 연구는 오픈소스 소프트웨어인 OpenFOAM을 사용하여 원통형 대책구조물의 설치 조건에 따라 토석류 흐름에 미치는 영향을 분석하였다. 짧은 시간 내에 흐름이 발생하고 비뉴튼 유체 특성을 갖는 토석류의 유효전단응력이 난류전단응력에 비해 상당히 크므로 난류의 영향은 무시하였다. 계산된 수치모의의 결과를 같은 규모로 시행한 실험결과와 비교분석 및 검증하였다. 공학학적 문제에 적용 가능하도록 비교적 낮은 해상도의 계산 격자를 사용했지만 실험에서 보여지는 토석류의 흐름거동을 양호하게 재현했으며 원통형 대책구조물의 배치조건에 따라 토석류 선단부 유속의 감소 정도 및 시간에 따른 흐름깊이 변화를 분석할 수 있었다. 이 연구는 다양한 조건을 가지는 토석류 흐름을 해석하는데 유용하게 활용할 수 있으며, 추후 복잡한 실제지형 조건을 고려하는 연구를 통하여 적용성을 확보하고자 한다.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.2
• /
• pp.75-85
• /
• 2004

Various geosynthetics are widely installed as a liner or a protective layer of waste landfills. The interface shear strength between the layers of geosynthetics in waste landfills is an important parameter to ensure the safety of bottom and cover system design. In this study, estimations of interface shear strength between geomembrane and geotextile or Geosynthetic Clay Liners (GCL) are performed by large direct shear tests. Especially, this research is focused on the effect of moisture within the interface shear strength between geosynthetics, because most interfaces are vulnerable to rain, leachate and groundwater beneath the liners.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.6
• /
• pp.1109-1117
• /
• 2017

Recently, 3D printer technology has been attracting attention in various industrial fields, and research papers are being conducted to utilize 3D printers in the construction industry. Actual structures such as bridges and buildings are being printed to 3D printers, and various applications such as mock-up structures using 3D printers are being proposed. In order to utilize 3D printer technology in the construction field, a 3D model is required, and the 3D BIM data produced at the design stage can be printed by a 3D printers, saving the cost and time of 3D model generation. However, 3D BIM data often does not satisfy the conditions for 3D printer output, causing many errors on output. In this paper, authors propose a problem analysis for 3D BIM model output to 3D printer and a method for reducing errors in 3D printing process of 3D BIM model. In addition, this paper presents a practical application of 3D model output from 3D printer.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.233-233
• /
• 2022

최근 기후변화로 인해 집중호우 및 돌발홍수의 증가로 침수피해가 빈번하게 발생하고 있다. 마찬가지로 해안지역의 피해 또한 증가하고 있으나, 해안지역의 특성을 고려한 연구가 미비한 실정이다. 따라서 본 연구에서 해안지역의 특성을 고려해 폭풍해일로 인한 월파뿐만 아니라 강우도 고려하여 해안지역의 범람 양상을 확인하고자 하였다. 본 연구에서는 국내 해안지역에 대한 빈도별 폭풍해일과 강우로인한 범람 모의를 진행하였다. 우선, 수치해석 모형의 경계조건을 산정하기 위해 EurOtop(2018)의 경험식을 이용하여 월파량을 산정하였다. EurOtop의 월파량 산정 시 암석 옹벽이 아닌 콘크리트 옹벽으로된 경사식 단면으로 고려하여 계산하였고 산책로와 벽까지 고려하여 계산하였다. 경험식 계산을 위해 매개변수(유의파고, 여유고, 구조물의 조도계수, 구조물의 기울기 및 경사 등)를 조정하여 계산하였다. 이 중, 계산에 사용된 유의파고는 시나리오별 강우에 대해 SWAN(Simulating WAves Nearshore)으로 계산된 값을 활용하였고, 해안선을 두 부분으로 나누어 해안지역 각 지점별 파고값의 평균을 사용해 월파량 계산을 진행했다. 이때, 파고의 종류로 5% 확률의 파고, 평균 파고, 중앙값 파고, 95% 확률의 파고로 분류해 월파량 계산을 진행했고, 그 중, 평균 파고를 이용해 계산한 월파량을 수치해석 모델의 입력자료로 활용하였다. 시나리오별로 계산된 월파량만을 이용해 2차원 침수모형인 FLO-2D의 경계조건 입력값으로 사용하여 침수 양상을 표출하기 위해 Mapper와 ArcGIS를 이용하여 침수와 범람 양상을 확인하였다. 또, 다른 조건으로 시나리오별 계산된 월파량, 연구유역 해안 반대편에 위치한 산으로부터 유입되는 물의 양 그리고 해안지역 전체에 내리는 강우를 입력자료로 사용해 모의를 진행한 후 Mapper와 ArcGIS로 표출하여 침수 및 범람 양상을 확인하였다.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.6 no.2 s.21
• /
• pp.9-15
• /
• 2006

Structures of Civil Engineering have been designed with a safety as their main purpose. However recently, the greenness side of the technology of civil engineering regarded as most Important and also utility values and stability of the structures. Also developments in the technology make materials to be higher strength and they shortened scales and stiffness of the structural members. This means that it brings an immoderate deflection and vibration of bridge structures simultaneously. Accordingly, this study ai ed to find and estimate the most idealized structure models on the effects of the deflection and vibration of bridges from the traffic lane load and human vibration - the main pass of bridge structures.