• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.2
• /
• pp.309-315
• /
• 2017

Recently it has drawn much attention on the technologies about Internet of Things (IoT) which connects objects with constrained resource and heterogenous communication module in order to communicate information via internet. We propose a real-time sensor monitoring system based on IPv6 over Bluetooth Low Energy (BLE), which is included in Bluetooth 4.2 Specification. Since this system uses a publish-subsribe based IoT protocol, so called Message Queueing Telemetry Transport (MQTT), neither transforming network data nor any proxy server is needed in order to transmit data. Through the web client connected to this system, you can monitor sensor data sent by BLE device in real-time, intermediated via MQTT broker and then delivered to the client via HTTP and websocket protocol. In this paper we evaluated network capacity and availability of the implemented test platform. Thus by using this system it is possible to make development cost low and to construct IoT network with heterogenous devices easily.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.11
• /
• pp.4745-4750
• /
• 2011

A HIL(hardware-in-the-loop) system was established and the simulation was carried out to determine whether the system operates normally. The system consists of turbocharger test bench, HIL platform with real time S/W and DAQ, and engine model using Matlab/Simulink. In the simulation the supplied fuel rate is changed step-by-step from 1.8944 kg/h to 4.7360 kg/h. The change of air-fuel ratio is analyzed and observed whether the air-fuel ratio follow the target air-fuel ratio 32. When the supplied fuel rate is changed, the air-fuel ratio is converged to the target air-fuel ratio after about 20 seconds. And the vane duty ratio of turbine and the boost pressure of compressor are also changed properly. Therefore this HIL system can be used to develop the new turbocharger and improve the performance of the modified turbocharger.

• Journal of KIISE:Information Networking
• /
• v.36 no.4
• /
• pp.360-368
• /
• 2009

Recently, broadband access networks have been competitively deployed all over the world with the development of various multimedia services for such a network. ETRI(Electronics and Telecommunications Research Institute) built the FTTH(Fiber-To-the-Home) service center to develop a next-generation equipment and a high-quality service/platform as well as to promote domestic industry in the field of optical communication. The FTTH service center has a variety of test equipments such as FTTH standard testbed for a BMT(bench mark test), a network operation center, and IPTV service equipments. Also, ETRI deployed a new type of commercial optical access networks cooperating with ISP(Internet Service Provider). This paper presents the performance evaluation of FTTH E-PON(Ethernet Passive Optical Network) system as a platform for TPS(Triple Play Service) based on QoS(Quality of Service) and QoE(Quality of Expericence) issues. This FTTH E-PON system is successfully demonstrated as an optical access network system by commercial network service provider and the FTTH service center of ETRI.

• Journal of IKEEE
• /
• v.25 no.3
• /
• pp.571-577
• /
• 2021

This paper describes ISO/TR 4804, an international standard to describe how to design and verify autonomous cars to ensure safety and cybersecurity. Goals of ISO/TR 4804 are (1) positive risk balance and (2) avoidance of unreasonable risk. It also 12 principles of safety and cybersecurity to achieve these goals. In the design procedures, it describes (1) 13 capabilities to achieve these safety and cybersecurity principles, (2) hardware and software elements to achieve these capabilities, and (3) a generic logical architecture to combine these elements. In the verification procedures, it describes (1) 5 challenges to ensure safety and cybersecurity, (2) test goals, platforms, and solutions to achieve these challenges, (3) simulation and field operation methods, and (4) verification methods for hardware and software elements. Especially, it regards deep neural network as a software component and it describe design and verification methods of autonomous cars.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.7
• /
• pp.977-985
• /
• 2021

The LiDAR sensor is attracting attention as a key sensor for autonomous driving vehicle. LiDAR sensor provides measured three-dimensional lengths within range using LASER. However, as much data is provided to the external system, it is difficult to process such data in an external system or processor of the vehicle. To resolve these issues, we develop integrated processing system for LiDAR sensor. The system is configured that client receives data from LiDAR sensor and processes data, server gathers data from clients and transmits integrated data in real-time. The test was carried out to ensure real-time processing of the system by changing the data acquisition, processing method and process driving method of process. As a result of the experiment, when receiving data from four LiDAR sensors, client and server process was operated using background or multi-core processing, the system response time of each client was about 13.2 ms and the server was about 12.6 ms.

• Journal of the Korea Convergence Society
• /
• v.9 no.11
• /
• pp.91-97
• /
• 2018

The plant factory represents one of the future agricultural systems into which ubiquitous information technology (U-IT) is incorporated, including sensor networking, and helps minimize the influence of external experimental factors that constrain the use of existing greenhouse cultivation techniques. A plant factory's automated cultivation system does not merely provide convenience for crop cultivation, but also expandability as a platform that helps build a knowledge database based on its acquired information and develop education and other application services using the database. For the expansion of plant factory services, this study designed a plant factory interworking service (PFIS) which allows plant factories to share crop growth-related information efficiently among them and performed a test on the service and its implementation.

• Journal of Platform Technology
• /
• v.8 no.4
• /
• pp.47-58
• /
• 2020

DO-330 Software Tool Qualification Considerations is a guideline for development of tools used to develop/verify software and hardware installed on aircraft. And among several processes, the verification process is very crucial as it occupies a large proportion for DO-330. Especially, in order to qualify tool with high safety level, test objectives must be performed with independence, accordingly, more time, cost, and manpower are required than other objectives. In addition, even if the test cases or test procedures are well defined, the higher the complexity of the test the higher probability of human error occurs. In this paper, we propose Script-based Test Automation Agent software structure for efficient DO-330 verification process of A661UAGEN tool developed by Hanwha Systems. Compared to the test performed manually by the test engineer, testing time of the Script-based Test Automation Agent is reduced by 87.5% and testing productivity is increased by 43.75%.

• The Journal of the Korea Contents Association
• /
• v.22 no.10
• /
• pp.535-545
• /
• 2022

The purpose of this study is to classify the various problems in surface road according to their severity and to propose a priority decision making process for road policy makers. For this purpose, the road problems reported by Cheok-cheok app were classified, and the EPDO was adopted and calculated as an index of their severity. To test applicability of the proposed process, some images of road problems reported by the app were classified and annotated, and the Deep Learning was used for machine learning of the curated images, and then the other images of road problems were used for verification. The detecting success rate of the road problems with high severity such as road kills, obstacles in a lane, road surface cracks was over 90%, which shows the applicability of the proposed process. It is expected that the proposed process will make the app possible to be used in the filed to make a priority decision making by classifying the level of severity of the reported road problems automatically.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.11
• /
• pp.107-114
• /
• 2022

In this paper, proposes a delivery robot that can be autonomous driving learning. The proposed robot is designed to be used in park-type apartments without ground parking facilities. Compared to the existing apartments with complex ground and underground routes, park-type apartments have a standardized movement path, allowing the robot to run stably, making it suitable for students' initial education environment. The delivery robot is configured to enable delivery of parcels through machine learning technology for route learning and autonomous driving using cameras and LiDAR sensors. In addition, the control MCU was designed by separating it into three parts to enable learning by level, and it was confirmed that it can be used as a delivery robot for learning through operation tests such as autonomous driving and obstacle recognition. In the future, we plan to develop it into an educational delivery robot for various delivery services by linking with the precision indoor location information recognition technology and the public technology platform of the apartment.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.3
• /
• pp.537-541
• /
• 2022

As technology advances, various applications linked to the music industry are becoming popular through new media. There have been many changes in the music market. Beyond the existing music market, where music copyright and performance rights were the center of the music business, we are unifying and operating communication channels that connect artists and fans, such as investment products derived from music copyrights. The technology that connects the fandom with additional business digital content has transformed into global platforms such as HYBE Entertainment's and YG Entertainment's Weverse, as well as SM Entertainment's Bubble. In addition, various national support projects to build a 5G MEC (MobileEdge Computing) environment to quickly respond to the rapidly changing 5G industry ecosystem are supporting for the immersive content demonstration, immersive content testing, and technical analysis, we are laying the groundwork to efficiently respond to the ever-expanding metaverse content market. Technology is changing dramatically. Therefore, we would like to study to changes in the music market brought about by technology and suggest strategies for a new era in the music business.