땅콩을 대상으로 하는 각종 농산가공기계의 개발 및 최적 작동에 필요한 땅콩 자실의 물리적, 기계적 및 공기 역학적 성질에 대한 연구가 수행되었다. 영호, 올, P.I. 314817의 3 가지 품종에 대해 땅콩 자실의 형상, 각부 칫수, 진밀도, 산물밀도 및 종실율이 측정되었으며, 땅콩자실에 대해 압축실험을 실시함으로써 자실이 파괴될 때의 힘, 변형량, 그리고 단위 체적당 최대 흡수 에너지인 터프니스 계수를 측정하여 기계적 성질로서 제시하였다. 공기 역학적 성질로서는 땅콩 자실과 종실의 종말속도 및 항력계수가 측정되었다. 1. 땅콩 자실의 기하학적 형상은 수원체로 모형화할 수 있었다. 2. 진밀도는 땅콩 자실의 경우는 515-620 $kg/m^3$, 종실의 경우는 960-1,090 $kg/m^3$, 의 값을 보였다. 3. 대합면이 수평인 자세에서의 파괴력은 영호가 61.9 N, P.I. 314817은 71.5 N, 올 땅콩은 84.8 N였으며, 터프니스 계수는 각각 30, 43, 72 kN-$m/m^3$, 의 값을 보였다. 모든 품종과 함수율에서 파괴력과 터프니스 계수는 대합면이 수직인 자세에서보다 수평자세에서 더 큰 값들을 보였다. 4. 땅콩 자실과 종실의 평균 종말속도는 각각 8.7-9.9 m/s, 10.0-11.6 m/s 범위였다. 종말속도는 진밀도와 직선적인 관계가 있었으며 품종과 형상에 따른 뚜렷한 종말속도의 차이는 보이지 않았다.
Journal of the Korean Society of Hazard Mitigation
/
v.9
no.1
/
pp.27-32
/
2009
The main objective of this study is to develop a test for measuring the bond shear strength between pavement layers. The research is also conducted to evaluate tack coat materials and application rate in porous pavement. The experiment includes using two types of emulsions (RSC-4, Modified Emulsion) and a asphalt binder type (HM-1). HM-1 was developed to be applied in porous pavement. The bond shear strengths were measured by a direct shear type device under various test conditions. The shear strength may not be appropriate in the evaluation of the bond shear strength, while the toughness of the test may be useful. In case of the tack coat application rate in porous pavement, RSC-4 has to be used a minimum amount of $0.8l/m^2$ and modified emulsion asphalt has to be applied a volume of use $0.5{\sim}0.6l/m^2$. HM-1, asphalt cement type, is far stronger bond shear strength than emulsified asphalt tack coat and had showed the excellent trackless property.
Kim, Kyungnam;Jo, Shin Haeng;Kim, Nakseok;Lee, Doosung
KSCE Journal of Civil and Environmental Engineering Research
/
v.38
no.2
/
pp.311-317
/
2018
The new asphalt surface reinforcement method (ASRM) is one of the preventive maintenance methods in asphalt concrete pavements. The adhesion performance of new ASRM satisfied the standard of non-slip pavement and bridge waterproofing materials. As a results of durability tests (as wheel load, rolling bottle and UV resistance test), the new ASRM showed sufficient resistance to traffic and environmental loads. The waterproof and chemical resistance tests of new ASRM were conducted to evaluate whether the pavement could be protected from water and chemicals and the performances of new ASRM were satisfactory. Furthermore, the new ASRM demonstrated some rejuvenation effects due to its toughness increases in recycled asphalt concrete mixture by 5% compared to the conventional hot mix asphalt mixture using reclaimed asphalt pavement. In conclusion, the new ASRM was evaluated to protect the asphalt concrete pavement and increase the lifetime.
This paper aimed to identify the sensation and the sensibility of transformed colors from the rustling sound of silk fabrics and to visualize the relationship between sensibilities and fabrics by two-dimensional model. The rustling sounds of 7 silk fabrics were recorded and then the recorded sounds were transformed into colors by the program of sound to color transformation. The sensation and the sensibility of transformed colors were evaluated by 30 participants with Likert scale and the physical properties of each specimen were obtained with red portion (RP), green portion (GP), blue portion (BP), and sum of color count (CC) by means of new equation. The adjectives of sensibility were grouped into three groups: Elegant, Active, and Tough. Elegant was related with RP positively and CC negatively. On the other hand, Active was related with GP and CC positively. Also Tough was highly related with RP. Furthermore, the fabrics that were estimated the high purchase preference showed high CC, RP and GP. Also two dimensional model of relation of the sensation and the sensibility could help to understand those relation.
To evaluate the effect of groundwater flow on the outlet temperature of a geothermal heat pump, 3 dimensional numerical simulations are performed considering both groundwater flow and pipe flow in the U-tube using TOUGHS, The present study involved the following 4 simulation cases (1) no groundwater flow, (2) slow groundwater flow (hydraulic conductivity: $1.0{\times}10^{-9}m/s)$, (3) fast groundwater flow (hydraulic conductivity, $1.0{\times}10^{-7}m/s$), and (4) groundwater flow varying with the depth (hydraulic conductivity: $1.0{\times}10^{-7}-1.0{\times}10^{-10}m/s$). The effect of groundwater flow on the outlet temperature is significant where hydraulic conductivity of aquifer is $1.0{\times}10^{-7}m/s$. Where hydraulic conductivity of aquifer is $1.0{\times}10^{-10}m/s$, however, that effect is negligible.
Receive dynamic focusing with an array transducer can provide near optimum resolution only in the vicinity of transmit focal depth. A customary method to increase the depth of field is to combine several beams with different focal depths, with an accompanying decrease in the frame rate. In this Paper. we Present a simultaneous multiple transmit focusing method in which chirp signals focused at different depths are transmitted at the same time. These chirp signals are mutually orthogonal in a sense that the autocorrelation function of each signal has a narrow mainlobe width and low sidelobe levels. and the crossorelation function of any Pair of the signals has values smaller than the sidelobe levels of each autocorrelation function. This means that each chirp signal can be separated from the combined received signals and compressed into a short pulse. which is then individually focused on a separate receive beamformer. Next. the individually focused beams are combined to form a frame of image. Theoretically, any two chirp signals defined over two nonoverlapped frequency bands are mutually orthogonal In the present work. however, a tractional overlap of adjacent frequency bands is permitted to design more chirp signals within a given transducer bandwidth. The elevation of the rosscorrelation values due to the frequency overlap could be reduced by alternating the direction of frequency sweep of the adjacent chirp signals We also observe that the Proposed method provides better images when the low frequency chirp is focused at a near Point and the high frequency chirp at a far point along the depth. better lateral resolution is obtained at the far field with reasonable SNR due to the SNR gain in Pulse compression Imaging .
우리가 소비하는 식량의 확보는 단위 수량의 증대 뿐만 아니라, 생산이후 수확, 조제가공 및 건조 저장과정에서의 곡물 손실 방지 또는 감소로 인한 간접 증산으로도 이룩될 수 있는데, 현재 우리나라에서는 수확 이후의 곡물 손실량이 전체 생산량의 약 11%에 달하는 것으로 추정되고 있다(12). 여기서 식량의 중요 손실원으로 기계적 원인과 곡물 자체의 특성에 의한 두가지 요인을 고려할 수 있다. 따라서 쌀의 물리적 특성이 규명되면 각 과정에서 발생되는 기계적 손실을 더욱 줄일 수 있을 것이다. 이러한 중요성에도 불구하고 지금까지 우리나라에서는 벼의 물리적 특성에 관한 연구가 거의 없는 실정이다. 특히 우리나라에 많이 보급되고 있는 통일계 품종은 관행 품종에 비하여 물리적 특성이 크게 다르다고 인정되고 있다. 따라서 본 연구는 벼와 현미의 특성을 기계적 및 유동학적 측면에서 함수율 및 품종별로 규명하여, 농업기계의 설계 및 작동조건, 그리고, 조제가공의 기초적 자료로 제시하고자 하였다. 실험 결과를 요약하면 다음과 같다. 1. 준 정하중의 압축시험에서 함수율은 벼와 현미의 기계적 및 유동학적 특성에 큰 영향을 미쳤으며, 특히 높은 함수율에서는 점성적인 특성이, 낮은 함수율에서는 탄성적인 특성이 나타났다. 2. 벼와 현미의 함수율이 24-12% (습량기준)의 범위에 있을 때 현미의 항복점은 2.0-7.2kg, 벼의 항복점은 2.5-7.6kg을 나타냈으며, 전반적으로 현미보다 벼의 항복점이 0.5-1kg 더 높았다. 또한 함수율이 18%(습량기준) 이하에서는 일반계 품종이 통일계 품종보다 압축 강도가 더 높았으나 18% 이상의 높은 함수율에서는 더 낮게 나타났다. 그리고 낮은 함수율에서 현미의 항복점은 현미 두께 대 길이의 비의 증가에 따라 직선적으로 감소하였다. 3. 현미의 최대압축 강도는 함수율 24-12%(습량기준)의 범위에서 2.94-10.4kg을 나타냈으며, 14% 수준의 낮은 함수율에서는 현미의 최대 압축 강도는 5.66-11.4kg으로 품종간에 높은 유의성이 있었다. 따라서 벼와 현미의 크기가 최대 압축 강도에 큰 영향을 미친 것으로 사료된다. 4. 함수율 12-24%(습량기준)의 범위에서, 현미의 항복점에서 변형은 0.20-0.40mm를 나타냈으며, 함수율이 약 17%일 때 최소치를 보였다. 벼의 항복점에서 변형은 0.20-0.41mm 였으며 통일계 품종이 일반계 품종보다 변형이 더 많이 생겼다. 5. 함수율 24-12%(습량기준)의 범위에서, 일반계 품종의 레질리언스(resilience)는 $0.142-0.603kg{\cdot}mm$, 통일계 품종의 레질리언스는 $0.229-0.601kg{\cdot}mm$로 나타났다. 함수율이 19% 이하에서는 일반계 품종이 통일계 품종보다 더 높게 나타났으며 19% 이상에서는 반대 현상이 일어났다. 또한 14%의 낮은 함수율에서, 현미의 레질리언스는 현미 두께 대 길이의 비의 증가에 따라 감소하였다. 벼의 레질리언스는 함수율의 감소에 따라 증가했으며, 그 범위는 $0.285-0.850kg{\cdot}mm$이었다. 6. 현미의 터프니스(toughness)는 함수율 24-12%(습량기준)의 범위에서 $0.841-2.795kg{\cdot}mm$이었다. 또한 일반계 품종과 통일계 품종 사이에는 유의성이 없었으나. 품종간에는 높은 유의성이 있었다. 7. 현미의 탄성계수와 스티프니스(stiffness)는 함수율의 감소에 따라 직선적으로 증가하였다. 현미의 함수율이 24-12%(습량기준)의 범위에 있을 때 탄성계수는 $7-40kg/mm^2$, 스티프니스는 8-34kg/mm를 나타냈다.
KSCE Journal of Civil and Environmental Engineering Research
/
v.35
no.6
/
pp.1367-1375
/
2015
The purpose of this paper is to suggest 10 mm aggregate specification for thin layer asphalt pavement using steel slag. Aggregate gradations of conventional dense-graded asphalt mixtures were made by fuller's model, whereas 10 mm dense-graded asphalt mixture was obtained tender mix due to close to the maximum density line. The proposed aggregate gradation specification was made to have enough VMA and well-interlocking refer to foreign standards. The correlation between the proposed aggregate gradation and the properties of mixtures were analyzed using Gradation Ratio (GR) and Compacted Aggregate Density (CAD). The CAD index has a high $R^2$ of 0.86-0.99 because the CAD index is able to reflect various aggregate properties. As the results of evaluation by CAD index the proposed aggregate gradation provides more reliable stability and VMA. The percent passing (%) of aggregate size smaller than 0.3 mm was limited 10% or more for improving crack resistance. This limitation increased for 15% of the asphalt mixture's toughness.
Kim Moo-Han;Kim Jae-Hwan;Kim Yong-Ro;Kim Young-Duck
Journal of the Korea Concrete Institute
/
v.17
no.2
s.86
/
pp.263-271
/
2005
HPFRCC(High Performance Fiber Reinforced Cementitious Composite) is a class of FRCCs(Fiber Reinforced Cementitious Composites) that exhibit multiple cracking. Multiple cracking leads to improvement in properties such as ductility, toughness, fracture energy, strain hardening, strain capacity, and deformation capacity under tension, compression, and bending. These improved properties of HPFRCCs have triggered unique and versatile structural applications, including damage reduction, damage tolerance, energy absorption, crack distribution, deformation compatibility, and delamination resistance. These mechanical properties of HPFRCCs become different from the kinds and shapes of used fiber, and it is known that the effective size of fiber in macro crack is different from that in micro crack. This paper reports an experimental findings on the mechanical properties of HPFRCCs reinforced with the micro fiber(PP50, PVA100 and PVA200) and macro fiber(PVA660, SF500). Uniaxial compressive tests and three point bending tests are carried out in order to compare with the mechanical properties of HPFRCCs reinforced with micro fibers or hybrid fibers such as compressive strength, ultimate bending stress, toughness, deformation capacity and crack pattern under bending, etc.,
KSCE Journal of Civil and Environmental Engineering Research
/
v.43
no.1
/
pp.71-77
/
2023
With the continuous industrial development, not only natural resource depletion, waste generation, but also various weather conditions are becoming more frequent. Efforts are continuing to recycle industrial by-products to overcome the climate crisis and save resources. Slag is a representative by-product generated in the steel industry, and it is characterized by improving rutting resistance and moisture sensitivity by increasing strength and reducing deformation when used as a material for asphalt concrete. On the other hand, slag has expansion properties so it is used as a relatively low-value-added material such as embankment and refilling materials. In order to expand the application of slag, an experiment was conducted to evaluate the crack resistance of slag asphalt concrete pavement. As a result of the indirect tensile strength test, it was found that the asphalt mixture using slag aggregate showed a value 1.13 times higher than that of the general HMA with the same particle size, and the toughness was 1.17 units, improving crack resistance. In addition, it was found that the failure number of the 4-point beam fatigue experiment and the slag asphalt mixture was 20,409, which was more than doubled compared to the general HMA. Furthermore, Overlay Test showed a tensile load residual rate of 4 times or more, improving crack resistance to repeated fatigue. Accordingly, the use of slag aggregate will likely have various advantages in improving the performance of asphalt concrete pavement.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.