• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.11a
• /
• pp.382-386
• /
• 2006

Three dimensional numerical analysis of the supersonic turbines with different rotor tip clearances was conducted to analyze the effect of the tip gap clearance variations on the turbine performance. The result showed that the turbine performance deteriorates and the tip leakage increases by the effect of the rotor tip clearance and the tip leakage affects turbine performance degradation dominantly.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.10 no.2
• /
• pp.78-86
• /
• 2006

This paper presents the performance test result of the 30-ton class turbopump turbine. Test has been conducted using high pressure cold air, The turbine overall performance has been measured for various pressure ratio and rotational speed settings. The nozzle-rotor clearance effect on turbine performance also has been tested for the four kinds of the nozzle-rotor clearance values. We found that turbine efficiency rated 51.1% at its design velocity ratio and pressure ratio of 13.5. We also found that turbine efficiency can be increased by 3.5% for approximately 1mm decrement of the nozzle-rotor clearance from its nominal value.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.334-338
• /
• 2008

현재 세계적으로 풍력터빈의 설치 용량이 점차 증가함에 따라 계통에 연계되는 에너지양 또한 급격하게 증가하였다. 풍력터빈의 크기 및 수가 적었던 예전에는 전형적인 분산형 전원으로서 계통에 소규모 외란이 발생하였을 경우, 풍력터빈은 운전이 정지되었으며 그로 인해 계통에 미치는 영향은 거의 무시될 수 있었다. 하지만 최근에는 계통에 영향을 줄 만큼 풍력발전단지가 증가함에 따라 계통 외란에 대해서 운전을 정지하지 않고 계통에 협조하는 특별한 형태로 그 역할이 변경되고 있다. 그래서 이미 많은 나라에서는 그 나라에 맞는 계통연계규정(Grid Code)을 만들어 풍력터빈들이 계통에 미치는 영향에 대해 재평가가 이루어지고 있으며 이제는 짧은 순간의 계통 외란에서도 풍력터빈은 지속적인 운전을 해야 하는 LVRT 기능을 법제화하고 있는 추세이다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.12 no.6
• /
• pp.48-55
• /
• 2008

We have simulated the performance of a simple engine model with a gas turbine engine simulation program based on CFD. 2-dimensional Navier-Stokes code for the viscous flow was applied to simulate a compressor and a turbine, and the chemical equilibrium code with the lumped method was applied to simulate the combustor. Unsteady-flow phenomenon between rotor and stator of the compressor and the turbine was analyzed by steady mixing-plane method. In this way, the influence of the turbine blade pitch on the engine was investigated. It was shown that the compressor is operated at more higher pressure conditions as narrower the pitch distance of the turbine.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.05a
• /
• pp.331-336
• /
• 2006

This paper studies the effects of the nozzle-rotor axial clearance of a supersonic turbine on turbine performance. The nozzle-rotor axial clearance of the supersonic turbine developed to drive a turbopump for 30 ton class liquid rocket engines was varied and a numerical analysis of the turbines having the different nozzle-rotor axial clearances was conducted. It has been found that turbine performance degrades with an increasing axial clearance due to the increased stagnation pressure loss in the axial clearance region.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.38-44
• /
• 2011

The performance experiment was tested for the velocity compound turbine of turbopump which was the main part of 75 ton class liquid rocket engine. The seal is installed between the 1st rotor and the reversing vane to reduce the leakage flow. The turbine outlet pressure of the velocity compound turbine by changing the rotating speed was compared with that of baseline turbine with single rotor including the effect on the total performance.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.160-163
• /
• 2010

We performed three-dimensional CFD analysis to investigate the effect of the nozzle-rotor axial gap of a partial admission supersonic turbine on the stage performance and the flow field. The computations are conducted for five axial gaps using flow analysis program, $FLUENT^{TM}$. The results show that the axial gap between nozzle and rotor give the effect on the mass flow rates of tip leakage and the flow angle at the rotor outlet.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.33 no.3
• /
• pp.234-240
• /
• 1997

터보 챠저의 반동도와 터빈 노즐유량의 변화를 행하여 엔진의 성능을 향상시킬 수 있었다. 터빈의 에너지 손실과 그 영향을 미치는 반동도 및 터빈 입구의 유로의 변화, 그리고 블레이드에서 역 유동에 대한 개선 조건도 제시하였다.

• 열병합발전
• /
• s.14
• /
• pp.4-12
• /
• 2000

• Aerospace Engineering and Technology
• /
• v.8 no.2
• /
• pp.8-12
• /
• 2009

It is absolutely necessary to measure the inlet pressure and temperature of a turbine or a compressor to evaluate the performance of it. And to measure the representative-averaged pressure and temperature of turbine inlet flow, rake is normally used. Rake has several elements for temperature and pressure and several rakes are installed at the inlet to average the radial and circumferential distribution of inlet flow. However the rakes cause unexpected losses and flow distortion at the turbine inlet which make the measured rake data different from true inlet value. So the evaluation of a turbine or a compressor performance becomes not accurate. This study suggest a correlation method which measure the loss by inlet rake and incorporates it in evaluating the performance of turbomachinery.