• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.5
• /
• pp.902-907
• /
• 2001

In this paper, we analyzed BER performance of the MC DS-CDMA system and evaluated the degree of performance improvement of the system caused by adopting turbo code recently receiving much attention due to its powerful coding capability. As a result of analysis, it was found that the MC DS-CDMA system without any powerful coding scheme can not serve voice quality $(BER : 10^{-3}$ regardless of the number of users and the value of $(BER : 10^{-3)$ in Rayleigh fading channel. On the other hand, it was found that the MC DS-CDMA system adopting turbo code for performance improvement, shows improved BER performance and can serve voice quality without regard to the number of users and the value of $(BER : 10^{-3)$ in the same channel. For example, when $(BER : 10^{-3)$ is l0dB and the number of users was 10, the MC DS-CDMA system adopting turbo code showed improved BER performance about $5\times10^{-3}$.

• Journal of Satellite, Information and Communications
• /
• v.1 no.2
• /
• pp.51-55
• /
• 2006

Digital satellite communication systems are usually integrated with terrestrial systems to provide various services. In these cases, they should satisfy the performance objectives defined by the terrestrial systems. Recommendation ITU-R S.1062 specifies the error performance objectives of digital satellite communication systems operating below 15 GHz. The error performance are given in terms of bit error probability divided by the number of the average bit errors in the burst ($\alpha$). This paper presents a theoretical method to estimate $\alpha$ that is a very important parameter in the satellite communication systems to analyze the error performance objectives. We show performance estimation result of DVB-RCS turbo code using the presented method, and verify them by comparing to the simulation results.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2010.11a
• /
• pp.282-284
• /
• 2010

1962년 Gallager에 의해서 처음 제안된 LDPC 부호는 터보부호(turbo codes)와 마찬가지로 Shannon의 채널용량 한계(channel capacity limit)에 가까운 성능을 보였지만 당시 기술력으로 구현이 불가능한 복잡도로 인해 오랫동안 잊혀져왔다. 1995년 Mackay 와 Neal은 이를 재발견하였고 간단한 확률적 복호법을 이용하여 LDPC 부호의 성능이 매우 우수함을 보였다. 또한 1997년 Mackay는 q>2일 때 LDPC 부호를 GF(q)상에서 구성할 경우에 성능이 더 좋아짐을 보였다. 본 논문에서는 이진 bit로 구성된 같은 길이의 정보 비트(information bit)를 통해 16-QAM 변조를 사용했을시 Binary LDPC 부호와 Non Binary LDPC 부호의 성능을 비교 분석하고, 최적의 성능을 가지는 LDPC 부호의 설계에 대해 제안한다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.9
• /
• pp.1654-1665
• /
• 2008

This paper presents bit splitting methods to apply multilevel modulation to iterative codes such as turbo code, low density parity check code and turbo product code. Log-likelihood ratio method splits multilevel symbols to soft decision symbols using the received in-phase and quadrature component based on Gaussian approximation. However it is too complicate to calculate and to implement hardware due to exponential and logarithm calculation. Therefore this paper presents Euclidean, MAX, sector and center focusing method to reduce the high complexity of LLR method. Also, this paper proposes optimal soft symbol split method for three kind of iterative codes. Futhermore, 16-APSK modulator method with double ring structure for applying DVB-S2 system and 16-QAM modulator method with lattice structure for T-DMB system are also analyzed.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.6
• /
• pp.585-591
• /
• 2020

The adaptive transmission techniques are efficient method for underwater acoustic communication to improve the system efficiency by varying transmission parameters according to channel conditions. In this paper, we construct four transmission modes with different data rates using the convolutional codes, which is freely set to size of information bits. On the receiver side, one critical component of adaptive system is to find which mode has best performance. In this paper, we proposed threshold detection algorithm to decide appropriate mode and applied turbo equalization method based on BCJR decoder in order to improve performance. We analyzed the performance of four modes based on threshold detection algorithm through the lake experiment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.6C
• /
• pp.368-375
• /
• 2011

In the distributed video coding system, the parity bits, which are generated in encoders, are used to reconstruct Wyner-Ziv frames. Since the original Wyner-Ziv frames are not known in decoders, the efficient correlation noise modeling for turbo or LDPC code is necessary. In this paper, an efficient correlation noise modeling method is proposed and the performance is analyzed. The method to estimate the quantization parameters for key frames, which are encoded using H.264 intraframe coding technique, is also proposed. The performance of the proposed system is evaluated by extensive computer simulations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.7A
• /
• pp.659-667
• /
• 2002

In this dissertation, in the Turbo Code used for error correction coding of the recent digital communication systems, we propose a new S-R interleaver that has the better performance than the existing block interleaver, and the Turbo Decoder that has the parallel concatenated New structure using the MAP algorithm. For real-time voice and video services over the third generation mobile communications, the performance of two proposed methods is analyzed by the reduced decoding delay using the variable decoding method by computer simulation over multipath channels of DS-CDMA system. Also, a Modified NCMA based on conventional NCMA is proposed to improve the channel efficiency in the mobile communication system, and is investigated over the multi-user environment of DS-CDMA system through computer simulation.

• 한국정보통신설비학회:학술대회논문집
• /
• 2009.08a
• /
• pp.72-77
• /
• 2009

In this paper, performance of a turbo-coded PLC system is analyzed and simulated in a power line communication channel. Since the power line communication system typically operates in a hostile environment, turbo code has been employed to enhance reliability of transmitted data. The performance is evaluated in terms of bit error probability. As turbo decoding algorithms, Max-Log-MAP algorithms are chosen and performances are compared. The results in this paper can be applied to OFDM-based high-speed power line communication systems

• Proceedings of the Korea Information Processing Society Conference
• /
• 2003.05b
• /
• pp.1477-1480
• /
• 2003

본 논문에서는 실시간 데이터 및 보안데이터, 영상데이터 통을 전송할 때 잡음으로 인해 발생되는 데이터 오류를 효과적으로 복원하기 위해 오류 정정 능력이 뛰어난 터보코드를 적응하여 신뢰성 있는 영상전송 시스템을 실현하였다. 영상처리 시스템에서는 CCTV, 비디오 카메라 등에서 나오는 NTSC(National Television System Committee) 영상 신호를 비디오 디코더를 통해 A/D 변환하여 출력하였다. 변환된 디지털 영상정보는 두 개의 영상필드로 출력되며 그중 하나의 필드가 선택되는 알고리즘을 EPLD(Erasable Programmable Logic Device) 로직회로로 구성하여 디지털 영상 데이터를 절반으로 줄이는 시스템을 구현하였다. 터보코드의 부호기, 복호기 시스템에서는 실수연산이 가능한 DSP(Digital Signal Processor)를 사용하여 터보코드를 구현하였으며, 터보코드의 성능을 좌우하는 인터리버부분은 블록 인터리버를 적용하여 설계하였다.

• 한국정보통신설비학회:학술대회논문집
• /
• 2009.08a
• /
• pp.309-313
• /
• 2009

In this paper, the network performance of a turbo coded optical code division multiple access (CDMA) system with cross-layer, which is between physical and network layers, concept is analyzed and simulated. We consider physical and MAC layers in a cross-layer concept. An intensity-modulated/direct-detection (IM/DD) optical system employing pulse position modulation (PPM) for satellite broadcasting communications is considered. In order to increase the system performance, turbo codes composed of parallel concatenated convolutional codes (PCCCs) is utilized. The network performance is evaluated in terms of bit error probability (BEP). From the simulation results, it is demonstrated that turbo coding offers considerable coding gain with reasonable encoding and decoding complexity. Also, it is confirmed that the performance of such an optical CDMA network can be substantially improved by increasing the interleaver length and the number of iterations in the decoding process. The results of this paper can be applied to implement the satellite broadcasting communications.