• Title/Summary/Keyword: 태양 고도각

Search Result 91, Processing Time 0.034 seconds

The Tracking Photovoltaic System by One sensor Type (One sensor방식의 추적식 PV System)

  • Ko, Jae-Hong;Park, Jeong-Min
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.13 no.10
    • /
    • pp.4733-4739
    • /
    • 2012
  • While traditional two-axis tracking systems with double sensors had been using two sensors to control azimuth and elevation angle of the sun so that a solar cell module would make a normal line with the sun, this paper proposed a new two-axis system that can achieve the same performance with only one sensor in it. It is Two-axis tracking system that control azimuth and elevation to control to be reduced for solar cell module as proposed tracking system uses 1 sensors and the sun always forms normal. Two-axis tracking system of one sensor method that propose in paper that could reduce electric power consumption and sees than fixed type preventing action and the most efficient driving and needless drive could confirm that generation efficiency of about 23 [%] increases. To heighten efficiency of solar cell doing to receive more sunlights chasing the sun, done tracking device have proceeded a lot of studies in large size way. Therefore, is expected that will do big part in the sun tracking supply through utility study about persistent generation efficiency constructing monitoring system of the sun tracking of this paper.

별 가시도 해석을 이용한 별 추적기의 최적 배치 결정

  • Yim, Jo-Ryeong;Lee, Seon-Ho;Yong, Gi-Lyok;Rhee, Seung-Wu
    • Aerospace Engineering and Technology
    • /
    • v.4 no.1
    • /
    • pp.66-76
    • /
    • 2005
  • In this study, star visibility analysis of a star tracker is performed by using a statistical apprach. The probability of the Sun and the Earth proximity, the solar array masking probability, and the solar array blinding probability by the Sun light are obtained from the arbitrary chosen satellite positions as a function of a line of sight vector of the star tracker in several satellite attitude modes. This analysis demonstrates that the optimized star tracker accomodations can be determined to be an elevation angle -40o and two azimuth angles $-35^{circ}$ and $-150^{circ}$.

  • PDF

Efficiency Analysis of PV Tracking System with PSA Algorithm (PSA 알고리즘에 의한 태양광 추적시스템의 효율분석)

  • Choi, Jung-Sik;Ko, Jae-Sub;Chung, Dong-Hwa
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.23 no.10
    • /
    • pp.36-44
    • /
    • 2009
  • This paper analyzes efficiency of photovoltaic(PV) tracking system using position solar algorithm(PSA). Solar location tracking system is needed for efficiently and intensively using PV system independent of environmental condition. PV tracking system of program method is presented a high tracking accuracy without the wrong operating in rapidly changing insolation by the clouds and atmospheric condition. Therefore, this paper analyzes efficiency of PV system using PSA algorithm for more correct position tracking of solar. Also, controlled altitude angle and azimuth angle by applied algorithm is compared with data of korea astronomy observatory. And this paper analyzes the tracking error and generation efficiency then proves the validity of applied algorithm.

Distribution of Photovoltaic Energy Including Topography Effect (지형 효과를 고려한 지표면 태양광 분포)

  • Jee, Joon-Bum;Zo, Il-Sung;Lee, Kyu-Tae;Choi, Young-Jean
    • Journal of the Korean earth science society
    • /
    • v.32 no.2
    • /
    • pp.190-199
    • /
    • 2011
  • A photovoltaic energy map that included a topography effect on the Korean peninsula was developed using the Gangneung-Wonju National University (GWNU) solar radiation model. The satellites data (MODIS, OMI and MTSAT-1R) and output data from the Regional Data Assimilation Prediction System (RDAPS) model by the Korea Meteorological Administration (KMA) were used as input data for the GWNU model. Photovoltaic energy distributions were calculated by applying high resolution Digital Elevation Model (DEM) to the topography effect. The distributions of monthly accumulated solar energy indicated that differences caused by the topography effect are more important in winter than in summer because of the dependency on the solar altitude angle. The topography effect on photovoltaic energy is two times larger with 1 km resolution than with 4 km resolution. Therefore, an accurate calculation of the solar energy on the surface requires high-resolution topological data as well as high quality input data.

Development of Photovoltaic-Thermal(CPV/T) System Based on Conical Solar Concentrator (원추형 집광기를 이용한 태양광-열(CPV/T) 복합시스템 개발)

  • Na, Mun Soo;Lee, Gwi Hyun
    • Proceedings of the Korean Society for Agricultural Machinery Conference
    • /
    • 2017.04a
    • /
    • pp.124-124
    • /
    • 2017
  • 본 연구에서 원추형 집광기와 CPV셀을 기반으로 한 태양광-열(CPV/T) 복합시스템의 설계 및 제작과정을 다룬다. 원추형 집광기의 경우, 이론적 해석을 통하여 최고의 집열효율을 갖는 원추각 45도의 집광기 4개를 결합하여 사용하였다. 원추형 복합시스템은 태양에너지를 집열하여 열에너지를 생산하는 집광기와 작동유체의 순환을 위해 이중 구조로 제작된 흡수기, 집광된 태양으로부터 전기에너지를 생산하는 CPV셀 등으로 구성되어 있다. 효율적인 태양복사열 집광을 위해 태양 위치에 따라 고도각과 방위각을 추적할 수 있는 2축 태양추적장치를 설비하였다. CPV셀은 원추형 집광기의 중심부에 위치한 이중 흡수관의 고집광부인 상단부에 위치하였으며, CPV셀의 결함을 방지하고, 부가적 태양광 집광을 위해 2차 보조 집광기를 부착하였다. 본 논문에서 소개하는 원추형 CPV/T 복합 시스템은 기존 원추형 시스템에 CPV 셀을 부착하여 전기와 열을 동시에 생산 할 수 있으며, 생산된 전기에너지와 열에너지를 이용하여 온실재배의 난방 문제, 운영비용 절약 등 다양하게 농업 분야에 적용가능하다. 특히, 원추형 복합시스템은 설계 및 제작에 있어 쉽고 간결하며, 제작 단가가 낮다는 점에서 보급에 이점이 있을 것으로 사료된다.

  • PDF

Development of 2-Axis Solar Tracker with BLDC Motor-Cylinder Actuator and Hall Sensor Feedback (BLDC 모터-실린더 구동, 홀센서 피드백 방식의 2축 태양광 추적장치 개발)

  • Lho, Tae-Jung;Lee, Seung-Hyeon;Park, Min-Yong
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.11 no.7
    • /
    • pp.2334-2340
    • /
    • 2010
  • Sun position computed by Michalsky shows maximum $1.5^{\circ}$, $0.88^{\circ}$ and 2 minutes differences in azimuth, altitude, and sunrise and sunset times respectively compared with Korean Almanac. The 2-axis solar tracking system, which consist control panel with ATmega128 CPU, BLDC motor-cylinder actuator and 2-axis link mechanism, was developed. Computed azimuth and altitude of sun for a current time, and latitude and longitude of tracker position built are controlled in real time by BLDC motor-cylinder actuators comparing with the position feed-backed by Hall sensor. The use of BLDC motor is free in maintenance. Implementation of a home-return function by Hall sensor is to minimize the cumulative error.

A Study on Verifying the Validity of a Solar Cell System Following Sunlight in the Horizontal Direction for Aid to Navigation (태양광원에 대한 수평방향 추적식 항로표지용 태양전지 시스템의 도입 타당성에 관한 연구)

  • Jeon, Joong-Sung;Kim, Jung-Hun;Lee, Yong-Han
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • 2009.06a
    • /
    • pp.414-418
    • /
    • 2009
  • In this paper, a solar power tracking method using the solar cells is proposed, which has 3 solar cell located at an interval of $60^{\circ}$ in azimuth so that the sunlight may almost be perpendicular to the solar cells without excessive mechanical operation. Compared with the solar cell voltages in each azimuth, there is the highest voltage in time interval. As a results, this solar cell system achieve higher relative efficiency of $1.6{\sim}11.5%$ than fixed solar cell system. Therefore, it is verifying that this solar cell tracking system obtain more relative efficiency than fixed solar cell system for aid to navigation.

  • PDF

Design Parameter Analysis of a Solar-Powered, Potential Energy-Storing, Long Endurance UAV (위치에너지를 축적하는 태양동력 장기체공 무인기의 설계 인자 분석)

  • Yang, In-Young;Lee, Bo-Hwa;Chang, Byung-Hee
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.39 no.10
    • /
    • pp.927-934
    • /
    • 2011
  • Design parameter analysis is performed for a solar-powered UAV, storing potential energy by climb flight. Parameters related to the flight for saving potential energy, i.e. minimum & maximum altitudes for level flight, gliding & climbing angle, design point speed & altitude, gliding & climbing start time are investigated as design parameters. Weight and size of the UAV are determined using a weight model for the components of the solar-powered UAVs. Produced energy and consumed energy are calculated using these weight and size, yielding the required weight of the battery for a given mission. Relationship between the total weight of the UAV and each parameter is investigated. For the parameters listed above, there exist their ranges only where the design is possible. And there exist optimal values of these parameters minimizing the total weight.

THE SELECTION OF ALTITUDE AND INCLINATION FOR REMOTE SENSING SATELLITES (원격탐사 위성의 고도와 궤도기울기 결정)

  • 이정숙;이병선
    • Journal of Astronomy and Space Sciences
    • /
    • v.12 no.2
    • /
    • pp.244-255
    • /
    • 1995
  • The success of a satellites mission is largely depended upon the choice of an appropriate orbit. In the case of a remote sensing satellite which observes the Earth, there exits an optimum solar elevation angle depending on the mission. Therefore a sun-synchronous orbit is suitable for a remote sensing mission. The second-order theory for secular perturbation due to non-symmetric geopotential was described. To design a sun-synchronous orbit, a constraint condition on regression of node was derived. A algorithm to determine the altitude and the inclination was introduced using this constraint condition. As practical examples, the altitudes and the inclinations of four remote sensing satellites were calculated. The ground tracks obtained by the orbit propagator were used to verify the resulting sun-synchronous orbital elements.

  • PDF

TMC (Tracker Motion Controller) Using Sensors and GPS Implementation and Performance Analysis (센서와 GPS를 이용한 TMC의 구현 및 성능 분석)

  • Ko, Jae-Hong
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.14 no.2
    • /
    • pp.828-834
    • /
    • 2013
  • In this paper, TMC (Tracker Motion Controller) as one of the many research methods for condensing efficiency improvements can be condensed into efficient solar system configuration to improve the power generation efficiency of the castle with Concentrated solar silicon and photovoltaic systems (CPV)experiments using PV systems. Microprocessor used on the solar system, tracing the development of solar altitude and latitude of each is calculated in real time. Also accept the value from the sensor, motor control and communication with the central control system by calculating the value of the current position of the sun, there is a growing burden on the applicability. Through the way the program is appropriate for solar power systems and sensors hybrid-type algorithm was implemented in the ARM core with built-in TMC, Concentrated CPV system compared to the existing PV systems, through the implementation of the TMC in the country's power generation efficiency compared and analyzed. Sensor method using existing experimental results Concentrated solar power systems to communicate the value of GPS location tracking method hybrid solar horizons in the coordinate system of the sun's azimuth and elevation angles calculated by the program in the calculations of astronomy through experimental resultslook clear day at high solar irradiation were shown to have a large difference. Stopped after a certain period of time, the sun appears in the blind spot of the sensor, the sensor error that can occur from climate change, however, do not have a cloudy and clear day solar radiation sensor does not keep track of the position of the sun, rather than the sensor of excellence could be found. It is expected that research is constantly needed for the system with ongoing research for development of solar cell efficiency increases to reduce the production cost of power generation, high efficiency condensing type according to the change of climate with the optimal development of the ability TMC.