• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.251-253
• /
• 2008

This research combines LED display System with a module of solar cell which transforms solar energy to electrical energy. In order to simplify the installation and the movement of LED Display System, the system removed the conventional power distribution is developed, and that improves the advertising effect of LED Display System.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1306-1307
• /
• 2011

Recently, the small scale photovoltaic (PV) electronic devices are drawing attention as the upcoming PV generation system. The PV system is commonly used in small scale PV applications such as LED lighting and cell phone. This paper proposes photovoltaic output sensorless (POS) maximum power point tracking (MPPT) control for a small scale charging system of PV-nickel metal hydride battery using field-programmable gate array (FPGA) controller. A converter is connected to a small scale PV cell and battery, and performs the POS MPPT at the battery terminal current instead of being at the PV cell output voltage and current. The FPGA controller and converter operate based on POS MPPT method. The experimental results show that the nickel metal hydride battery is charged by the maximum PV output power.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.362-364
• /
• 2003

Generally, photovoltaic system is composed a number of solar cells array. so, virtual implementation module for solar cell array is needed Parallel connection each module for extract the power. A desirable characteristic of a parallel supply system is that individual converters share the load current equally and stably. The current sharing(CS) can be implemented using two approaches. The first one, known as a droop method, relies on the high output impedance of each converter. and The second approach, known as active current-sharing techniques. In this paper, analyze for better control logic of parallel connecting virtual implements of solar cell at using droop method.

• 융복합기술연구소 논문집
• /
• 제3권1호
• /
• pp.37-40
• /
• 2013

Plant factory industry as a new agriculture is in the spotlight. In this paper, we experimented plant factory applied photovoltaic system and LED lighting. For growing the plant, red, blue and white LED were placed into 1:4:3. Electric power generated by the photovoltaic system was supplied on DC power supply instead of AC. The designed and experimented power generation amount per day of photovoltaic system were 2,860 Wh and 2,272 Wh respectively. Plant has not been grown at the dead space of LED lighting so it is required to array LED lighting.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 추계학술대회 논문집
• /
• pp.202-205
• /
• 2007

현재 태양광, 풍력 및 연료전지 즉, 신재생에너지를 많이 사용하게 됨으로써 이를 계통과 병렬로 연결하여 쓰고 있다. 그러나 계통에 연결할 경우 여러 가지 문제가 발생할 수가 있는데 그중에서 대표적으로 단독운전을 들 수가 있다. 이를 방지하기 위한 검출기능은 시스템의 안전성 및 전기적 안전성 측면에서 매우 중요하다. 본 연구에서는 단독운전 검출을 위한 RPV 방식 및 제어알고리즘을 제안하였으며, 계통의 전압 위상을 기준으로 전류위상각도에 따른 주파수 변동 특성을 해석하였다. 해석 및 제안된 방법의 타당성은 EMTP 및 Matlab 을 이용하여 검증하였다.

• 전기학회논문지P
• /
• 제59권1호
• /
• pp.129-133
• /
• 2010

A hybrid system which is combined several complementary new and renewable power sources, such as photovoltaic, fuel-cell, and wind generator, etc., has been presented in various approaches. For instance, a photovoltaic cannot always generate stable output power with ever-changing weather condition, so it might be co-generated with a wind generator, diesel generator, and some other sources. In this paper, a residential PV-FC hybrid system is suggested as a distribution power source, and its operation is optimized by HOMER$^{(R)}$. As a result, it is the most economic that 5[kW] PV, 1[kW] FC, 4 batteries, 2[kW] electrolyzer, 0.5[kg] $H_2$ tank, 3[kW] converter are applied to the hybrid system.

• 전기학회논문지P
• /
• 제63권3호
• /
• pp.125-130
• /
• 2014

This paper is research result for a development of solar cell silicon ingot glowing(SCSIG) PWM converter system for 120[kW] 3[kA]. The system include 3-phase AC-DC rectifier diode converter of input voltage AC 460[V] and 60[Hz], DC-AC single phase full bridge PWM inverter of high frequency, AC-DC single-phase full wave rectifier using center-tapped of transformer for low voltage 50[V] and large current 3,000[A], carbon resistor load 0.2 [$m{\Omega}$]. PWM switching frequency for IGBT inverter control set 15KHz. The suggested researching contents are designed data sheets of power converter system, PSIM simulation, operating characteristics and analysis results of developed SCSIG system.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.737-742
• /
• 2002

This reaserch is concern with dynamic modeling of satellite with deployable solar arrays equipped with strain energy hinges(SEH). It is found from experiments that the SEH has the nonlinear dynamic characteristics and complex buckling behavior which is difficult to explain theoretically. In this paper, we use an equivalent one dimensional nonlinear torsional spring for the SEH. Lagrangian equations of motion are used for the derivations.

• 전기학회논문지P
• /
• 제58권4호
• /
• pp.568-573
• /
• 2009

Because of environmental crisis, researchers are seeking and developing a new, clean, safe and renewable energy. Solar cell energy and fuel cell energy have inestimable development potential. The paper introduces hybrid photovoltaic-fuel cell generation systems supplying a remote power load and hybrid system of solar cell and fuel cell considering the advantages of stable and sustainable energy from the economic point of view. Fuel cell power system has been proven a viable technology to back up severe PV power fluctuations under inclement weather conditions. Fuel cell power generation, containing small land us, is able to alleviate the heavy burden for large surface requirement of PV power plants. In addition, the PV-fuel cell hybrid power system shows a very little potential for lifetime $CO_2$ emissions. In this paper shows the I-V characteristics of the solar module which are dependent on the power of the halogen lamp and the I-V characteristics of fuel cells which are connected in parallel. Also, it shows efficiency of the hybrid system.

• 위성통신과 우주산업
• /
• 제13권1호통권28호
• /
• pp.72-80
• /
• 2006

통신해양기상위성은 기상관측, 해양관측 및 통신방송의 3가지 임무를 수행하는 정지궤도 복합임무 위성이다. 위성본체는 기존의 화성탐사선(Mars Express) 위성의 구조를 확장하여 새로 개발한 구조체에 기존의 E3000 통신위성 버스에 사용하였던 전기전자 부품 및 추진계를 사용한다. 3축제어 위성으로서 태양전지판은 한 쪽에만 부착되어 있으며, 반대쪽에는 종래의 기상위성이 모멘트 균형을 위하여 갖고 있었던 솔라세일(solar sail)을 갖고 있지 않다. 기상탑재체는 미국의 아이티티(ITT)가 제작 공급하고, 해양탑재체는 이에이디에스 아스트리움(EADS Astrium)사와 항공우주연구원이 공동으로 개발하며, 통신 탑재체는 전자통신연구원에서 개발한다. 지상국은 항공우주연구원이, 관제시스템은 전자통신연구원이 개발을 담당하고 있다. 개발의 전 과정이 해외협력 개발로 이루어진다. 설계는 프랑스의 뚤르즈 소재 이에이디에스 아스트리움(EADS Astrium)사에서 한국 기술진의 참여 하에 이루어지며, 조립 및 시험은 항공우주연구원의 시설을 이용하여 한국에서 이루어진다. 발사준비도 공동으로 수행하고, 발사 후 전이궤도운영은 아스트리움사의 지상국을 사용하여 수행하여 목표궤도에 진입시킨 후 항공우주연구원의 지상국에서 궤도 내 시험(in-orbit-test)를 완료한 후 위성을 인도 받는다.