• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.12
• /
• pp.96-105
• /
• 2009

Photovoltaic array distance will be calculated that can have maximum output through the rearrangement of photovoltaic array by comparing and analyzing the power output decrease from the shadows of photovoltaic arrays according to the consideration of incidence angle that is not suitable to the situation of our country among the causes of power output decrease by sampling photovoltaic power generation plants. When relocate simulation result photovoltaic array 1 line, when relocate about 2.8[%], photovoltaic array 3 lines when relocate about 1.2[%], photovoltaic array 2 lines, output of about 5.0[%] improved. Also, gained space gains of photovoltaic array party 1.29[m] when relocate photovoltaic array party 0.82[m], 3 lines when relocate photovoltaic array party 0.39[m], 2 lines when relocate 1 line. As gains occur on photovoltaic array clearance, time that receive effect of shade was slowed down gradually and showed result that elevation of output shows finally.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.11a
• /
• pp.65-70
• /
• 2007

고연색성의 실시간으로 색온도 제어 가능한 승강기용 조명 제품 개발을 위하여 4계절 별 일 중 주광의 색온도 변화를 계산하였다. 4계절 별 일 중의 색온도 변화는 대한민국 서울의 위치를 기준으로 태양광 직사조도, 청공광조도 등을 계산하고 지면조도와 색온도의 관계로부터 춘분, 하지, 추분, 동지의 일 중 색온도 변화를 계산하였다. 이 값들을 색온도 제어회로의 Microprocessor에 이식함으로 4계절 별로 실시간으로 색온도가 변화하는 승강기용 조명기구를 개발하였다. 또한 개발 시제품의 전기적, 광학적 성능 측정 결과 각각의 개발 목표 항목을 만족시켰다.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.05a
• /
• pp.117-122
• /
• 2005

최근 에너지 절약에 대한 관심이 고조되면서 기존 광원보다 효율이 좋은 광원개발이 계속되고 있으며 그 대표적 것이 고출력(high-power) LED이다. 고효율 LED의 개발로 인해 일부에서는 일반 조명용으로 사용하려는 연구가 진행 중이며 풍력과 태양광 발전을 이용한 야간 조명용 전원으로 사용하려는 연구도 진행되고 있다. 이에 본 논문에서는 조명용 광원으로 직류 전원을 이용한 고출력 LED의 사용 가능성을 확인하고자 하며 기존 방식에 비하여 보다 안정적이고 효율이 좋은 새로운 LED 전원구동장치를 제안한다. 제안된 방식은 기존의 방식에 리액터의 크기를 줄일 수 있었으며 효율이 개선됨을 확인하였다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2015.01a
• /
• pp.165-166
• /
• 2015

본 논문에서는 식물공장에서 사용할 수 있는 파장별 광원제어가 가능한 조명장치의 설계하고 구현하고자 한다. 식물의 생장에 필수적인 광원의 파장에 따라 생장에 다양한 영향을 미치게 된다. 따라서 본 논문에서는 식물 생장에서 필요한 다양한 파장의 빛을 공급할 수 있는 식물공장용 조명시스텡을 개발한다. 조명시스템은 마이크로 컴퓨터를 이용하여 적, 청, 녹색 3색 LED를 PWM제어하여 광량과 세기를 제어하고, 공급된 광량을 적산하여 조사된 광량을 확인할 수 있도록 구성하였다. 본 조명 시스템은 태양광 이용형 식물공장의 보조광원으로 사용 가능하며, 완전제어형 식물공장에서 사용이 가능하다.

• Journal of the Korean Solar Energy Society
• /
• v.32 no.6
• /
• pp.11-21
• /
• 2012

In the normal office building, the energy consumption to maintain the reasonable intensity of illumination for the work by using the artificial illumination occupies 30% or greater of the whole building electric energy consumption. If the dependability of the artificial illumination is dropt by positively using the natural lighting from the outside, the large amount of electrical energy can be saved, in addition the more nice visual environment for work can be created. Daylight is lighting source that most closely match visual response of the human, because sunlight and skylight achieve the harmony. For this reason, the daylight of small amount than amount of the artificial lighting source also can give the same effect in work activities of human. In addition, if there is daylight at the window of the building, the energy can be saved by controlling the artificial lighting. In this paper, in the building using the photovoltaic power generation analyze the correlation between the amount of energy generated by photovoltaic and indoor illumination and this was proved through the simulation with Relux 2010. In addition, the amount of daylight inflow in the room and distribution was drawn by the equation and the ratio for the sectional dimming control of each lighting equipment was predicted and the energy saving amount according to this was calculated. As a result, the indoor illumination was satisfied with recommended illumination value of the office and consumption power could be reduced approximately with 20~70%.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1148_1149
• /
• 2009

반사형 전동 블라인드는 BEMS(Building Energy Management System)에 이용되는 조명 에너지 절감 장치로서, 블라인드 날개를 반사형 재질로 제작하여, 외부 채광이 블라인드 날개에 반사되어 천장에 반사되고 반사된 빛은 천장에서 확산되어 실내 깊숙이 부드럽고 균일한 조도를 공급해 준다. 이를 이용하면, 실내 거주자의 불편함 없이 실내 인공조명 사용량을 줄일 수 있다. 이를 구현하기 위해서는 태양광선의 고도의 변화에 따라 블라인드의 제어 각도를 계산하여 블라인드 제어 전동 모터를 구동해야 한다. 따라서 본 논문에서는 외부 채광을 실내 천장 면에 균일하게 반사할 수 있는 블라인드 날개의 제어 각도의 최적 조건을 제시하고, 컴퓨터 시뮬레이션을 통해 제시한 블라인드 날개 각도의 최적성을 검증하였다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.12
• /
• pp.1-9
• /
• 2013

A standalone LED lighting system in using solar energy has been used usually less than 70W of lighting power because of a troublesome installation and maintenance. In this system, as more and more LED lighting power increases, the capacity of photovoltaic panel does proportionally, and to improve the charging efficiency of solar energy, MPPT(Maximum Power Point Tracking) techniques is used frequently, but the solar tracker is not. In this paper, a solar tracker which traces the light of the sun in varying hour to hour is studied to apply to the standalone LED lighting system. This solar tracker consists of twin axis for tracing the azimuth and altitude respectively, and it has a robust structure with safe mode to stand a strong wind. As a result of analysis, generating efficiency of the traced type has improved on the fixed one 28.84% on average.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.14 no.4
• /
• pp.16-22
• /
• 2000

This paper describes Transformer-less type utility interactive system that is combined with buck/boost chopper applying partial resonant method, which remove Transformer, and high efficient PWM inverter. Therefore, it is possible to make it lightweight, to cut down the cost, and to improve its reliability. What the merits of this system are that we can transmit arbitrary power arbitrary power to load and utility regardless of generating voltage magnitude of solar cell and we can always obtain high factor controlling by equal phase signal with utility.

• Journal of Energy Engineering
• /
• v.26 no.2
• /
• pp.64-72
• /
• 2017

The performance analysis of the 70 W class LED lighting system suitable for the Middle East environment was performed using the lumped parameter model. The LED light is composed of a heating substrate, a heat pipe, and a heat sink. We divided the LED lights into four objects and applied energy equilibrium to each of them to establish four lumped nonlinear differential equations. The solution of the simultaneous equations was obtained by the Runge-Kutta method. Convective heat transfer coefficients of the lumped model were obtained by multidimensional CFD analysis. As a result of comparison with experiment, it was found that the heating substrate had an error of $1.5^{\circ}C$ and the upper heat sink had an error of $1.8^{\circ}C$ and the relative error was about 0.6 %. Using this model, temperature distribution analysis was performed for normal operating conditions with an ambient temperature of $55^{\circ}C$, with sunlight only, with abnormal operating conditions with sunlight, and without an upper heat sink.

• Journal of the Korean Solar Energy Society
• /
• v.24 no.4
• /
• pp.1-10
• /
• 2004

In view of global environmental problems and resource exhaustion, we must develop new energy resources that are abundant and provide substitutes for fossil fuels. Renewable energies, such as solar, are ideal because they are clean, inexhaustible, and available everywhere in the world. Photovoltaic(PV) system, in general, are operated as a stand-alone, grid-tied, or hybrid system. Many of the stand-alone PV systems are installed. Although the pre-installation cost of PV system is high, it poorly has been operated due to the absence of optimal management standards. Therefore a study on the performance of PV system is important for the system design and maintenance. In this paper a photovoltaic lighting system was resigned according to load consumption. Then a PV lighting system which used electrodeless lamp as a load was installed. In order to investigate the system operating characteristics we've added a monitoring system to the PV lighting system. The monitoring system using the LabVIEW program regularly checks the operation of the PV lighting system and records the system data. According to the system data, the stability and availability of the PV lighting system were evaluated.