• Journal of Animal Science and Technology
• /
• v.47 no.4
• /
• pp.513-524
• /
• 2005

This study was conducted to introduce recycling procedures of food waste(FW) as feed according to the dehydration, semi-dehydration fermentation and liquid fermentation methods through the on-site survey of companies related, to trace physico-chemical components and nutritional losses depending upon the processing stage for each method and finally to suggest more desirable methodology for the efficient utilization of FW as animal feed. For the dehydration method, dewatering of FW alone reduced(P<0.05) moisture(approximately 10%) and ether extract contents and increased(P<0.05) fiber contents. Dewatering and subsequent dehydration of FW decreased(P<0.05) contents of ether extract, limiting amino acids such as lysine, methionine and histidine, pepsin digestibility of protein by half, and NaCl content by 40%, increased(P<0.05) contents of fiber, crude ash, Ca and P, and did not alter(P>0.05) pH. The semi-dehydration fermentation method of FW did not affect(P>0.05) the chemical components, pepsin digestibility of protein, pH and NaCl content. For the liquid fermentation method, pasteurization and fermentation of FW decreased(P<0.05) contents of dry matter, ether extract, crude fiber, lysine and NaCl; however, it did not affect(P>0.05) other chemical components, pepsin digestibility of protein and pH. Among the processing methods, nutrient losses were highest for the dehydration method(25% of metabolizable energy loss, 12% of organic matter loss) and little for the semi-dehydration and liquid fermentation methods. The on-site survey of companies related revealed that the existence of foreign materials in FW products were problematic for all the three companies surveyed, thus it was necessary to develop a more efficient screener. Before feeding FW-containing diets to pigs, high quality of protein and energy feedstuffs needed to be fortified for the dehydration method. For the semi-dehydration fermentation method, the scientific diet formulation technology was required at the initial mixing stage. For the liquid fermentation method, possibly most energetic and proteinaceous feeds needed to be supplemented for the normal animal growth.

• Journal of Life Science
• /
• v.26 no.10
• /
• pp.1105-1112
• /
• 2016

The aim of this study was to examine the metabolic adjustment of lactate dehydrogenase (EC 1.1.1.27, LDH) isozymes to the environmental temperature in bluegill (Lepomis macrochirus). This study included three groups of bluegill collected in April (group Ⅰ), May (group Ⅱ), and September (group Ⅲ). The LDH activities of skeletal muscle, heart, and brain tissues were higher in group Ⅲ than in groups Ⅰ and Ⅱ. The citrate synthase (EC 4.1.3.7, CS) activity was higher in skeletal muscle but lower in heart and brain tissues of group Ⅱ as compared to group Ⅰ. In contrast, the CS activity was lower in skeletal muscle and higher in heart and brain tissues in group Ⅲ than in group Ⅱ. Furthermore, the LDH/CS activity ratio was higher in the skeletal muscle and brain in group Ⅲ than in groups Ⅰ and Ⅱ. Accordingly, anaerobic metabolism was increased in group Ⅲ. LDH A₄, A₂B₂, and B₄ isozymes were expressed in skeletal muscle, heart, liver, and brain tissues. The LDH C hybrid was detected in brain tissue. The LDH A₄ isozyme was successfully purified by affinity chromatography. The molecular weight of the purified LDH A₄ isozyme was 136 kDa and its optimal pH for enzymatic activity was 8.0. The K_m^PYR values of LDH in skeletal muscle were 0.161-0.227 mM using pyruvate as a substrate. These kinetic properties of LDH in skeletal muscle are consistent with the fact that bluegill is a cold-adapted species. These results may be useful for predicting the habitat use of this fish.

• Korean Journal of Veterinary Research
• /
• v.12 no.1
• /
• pp.37-50
• /
• 1972

Another comparison of alveolar gas pressures, in a continuously rebreathing dog lung, with pulmonary arterial (mixed venous) blood, again showed alveolar pressures to be the higher for $CO_2$ and usually $O_2$ (positive ${\Delta}Pco_2$, and ${\Delta}Po_2$). ${\Delta}Pco_2$ was almost invariably positive, it was independant of time and of plasma pH changes produced by acid or bicarbonate infusion, but proportional to blood $CO_2$ level. It was seemingly little affected by the distribution or magnitude of blood flow nor did it result from failure of $CO_2$ equilibrium within the blood, but it did rise with carbonic anhydrase inhibition. ${\Delta}Po_2$ was more variable and sometimes negative, particularly at low blood flow rates. It seemed in dependant of time, and plasma pH changes, apart from an inverse relationship with that resulting from $CO_2$ changes. It existed despite considerable potential for gas exchange, and was unaffected by inhibition of the $CO_2$ reactions.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2001.11a
• /
• pp.57-58
• /
• 2001

용수 다소비 산업으로 분류되는 제지공업의 특성 상, 용수사용의 억제 및 용수의 무방류화에 대한 압력이 증가되고 있는 반면, 초지환경은 날로 열악해지고 있는 실정이다. 한 예로써, 용지의 재활용율 및 재사용 비율이 증가함에 따라 원료의 저급화가 심 각한 수준에 이르고 있으며, 이러한 초지환경의 변화는 각질화되고 극도로 미세화된 다량의 미세섬유 발생 및 잡고지로부터 유입되는 점착성 이물질과 무기 충진제의 도입 등을 유발함으로서 제품의 물리적 성질 저하, 탈수부하 증가로 인한 생산성 저하, 약품사용량 증가 등을 초래하여, 결과적으로는 폐수처리장의 부하를 증대시킴과 동시에 청수사용량 및 폐수방류량을 증가시키는 악순환을 되풀이하게 된다. 국내 제지산업이 국제적 경쟁력을 갖추기 위해서는 제품의 증대가 필수적이나, 원료와 설비의존도를 감안할 때, 제품특성과 공정 분을 결정하는 습부공정을 정확히 파악하여 최적 운전조건을 확립하는 것이 가장 경제적이고 용이한 방법일 뿐만 아니라 전체 제지공정의 정정화에도 기여할 수 있을 것으로 판단된다. 일정규모이상의 종이를 생산하는 제지공장은 거의 대부분 컴퓨터로 처리되는 온라인 공정조절 시스템(On-line process control system)을 구비하고 료의 도입에서부터 설비운전 및 제품의 기본적인 품질관리까지 실시간의 자동화되고 안정적인 운전과 관리시스템을 유지하고 있다. 그러나 전체 제지공정 중, 제품 물성과 운전조건의 대부분을 결정하는 습부공정만큼은 아직도 주기적인 분석이 행해지고 있지 않을 뿐만 아니라, 슬러리의 농도나 보류도 정도를 제이하면 분석항목 조차도 변변히 확립되어 있지 않을 실정이다. 이는 다량의 물 속에 존재하게 되는 용전물질(Dissolved solids, DS), 부유물질(Suspended solids, SS), 섬 유(Fibers), 무기 미 세분(Inorganic f fines), 그리고 투입되는 약품간에 발생하는 계면동전현상 및 이러한 현상과 최종 지제 품의 물성간의 상관관계에 대한 이해 정도나 경험 부족에서 기인하는 것으로 생각된다. 1 1983년 미국제지기술연합회(T APpI)의 제지용 첨가제 분과위원회(Papermaking A Additive Committee)에서는 습부공정의 적절한 조절을 위해 어떤 항목들이 필요하며 그 중요도는 어떠한가를 조사하였으며, 그 결과로 전하밀도, 제타전위, 보류도 및 여수 도, 무기 미세분 함량 등이 중요하다고 보고하였다. 그러나 지료의 전기적 특성을 실시 간으로 측정하는 기자재류가 최근에 이르러서야 도입되고 있는 실정이기 때문에 충분 한 현장적용 사례가 보고되지 못하고 있으며, 결과적으로 얻어진 정보와 최종 지제품의 물성 및 초지기 운전조건과의 상관관계를 확립하는 작업결과는 더욱 찾아보기 어렵다. 따라서, 본 연구에서는, 라이너지 제조공장의 습부공정에 투입되는 약품이 지료 의 전기적 성질, 즉 전하밀도와 제타전위에 미치는 영향을 모니터링함으로서 지료의 전기적 성질들과 습부 공정상태와의 상관관계를 살펴보고자 하였다. 본 연구는 다음과 같은 순서로 진행하였다.

• Journal of Korea Foresty Energy
• /
• v.19 no.2
• /
• pp.86-92
• /
• 2000

The liquefactions of $\alpha$-cellulose(Sigma Chemical, C-8002, 47H0383) was prepared in the presence of phenol using sulfuric acid as a catalyst under $N_2$ gas protection at $180^{\circ}C$ for 60minutes to examine its components. The ratio of $\alpha$-cellulose to phenol was 1: 6.2(w/w), and that to sulfuric acid was 1: 0.05(g/$m\ell$). The yields of liquefaction were calculated after the liquefied mixtures were passed through 1G4 glass filter. The luquefied product of $\alpha$-cellulose was analyzed using GC-MS Spectormeter. The 12 compounds identified by GC-MS Spectrometer, of which peak area covers 54% as 2,4-dimethyl phenol, p-isopropyl phenol, 1-ethyl-3,5-dimethyl benzene, o-isopropyl phenol, (E)-2,4\` dihydroxy-stilbene, 2,2\`-methylene-bisphenol, 4,4\`-methylenebisphenol, 3-methyl-2-hydroxyphenyl-(E)-2-hydroxyl-4\`-methoxy-stilbene, 1-phyenyl-1-(4\`hydroxyphenyl)methanol phenol derivatives. From this results, the reaction pathways of the liquefaction of cellulose were proposed through electrophilic substitution reaction. Phenol as a solvent might react with the reaction intermediates as well in the cellulose liquefaction.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.24 no.2
• /
• pp.67-74
• /
• 2016

This study was purposed to evaluate the characteristic changes of the solidified livestock manure fuel(SLMF) through the application of compression treatment process. The compression process led to an increase of VS/TS ratio (Volatile solids/Total solids ratio) and moisture removal effect of SLMF. The amount of leachate withdrawn from dairy cattle manure and Hanwoo manure by compression were 21~26%(w/w) and 15~20%(w/w), respectively. The specific gravity of the leachate of dairy cattle manure and Hanwoo manure were 1.01 and 0.99, respectively. The dehydrated cow manure was easily processed into ball-shaped solidified fuel. The drying time of the SLMF was proportional to the diameter of the solidified fuel. The highest heating value was observed in diameter range of 10~15mm SLMF. It is concluded that the higher heating value of 10~15mm SLMF was related with the amount of fibrous matter contained in the SLMF.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.12
• /
• pp.1-8
• /
• 2016

This study assessed the feasibility of odor removal by the application of Bacillus sp. that has many advantages in sewage treatment to sewage sludge. The NH3 removal rates in the treatment of primary sludge using only aeration were measured at 24, 48, and 72 hours of treatment and the results were 12.5 %, 12 %, and 42.1 %, respectively. The NH3 removal rates of a reactor injected with BIO-CLOD made by solidifying Bacillus sp. concentrated 10 % together with other substances were measured after 24, 48, and 72 hours of treatment and the results were 43 %, 70 %, and 81 % respectively. In the cases where the Bacillus sp. cultured in NB medium was injected into the primary sludge reactor to reach injection rates of 0 %, 1.7 %, 3.3 %, and 6.7(v/v%), the TVOC removal rates measured when 72 hours had passed after the injection were 59 %, 71 %, 88 %, and 98 % respectively, which were higher than the NH3 removal rates as the NH3 removal rates measured at the same time were shown to be 29 %, 25 %, 31 %, and 48 %, respectively. In the sludge dewaterability conducted with various Bacillus sp. injection concentrations, a Bacillus sp. concentration of 4(v/v%) was considered to be suitable. The Bacillus sp. concentrations and reduction in the bad odor substances were correlated with each other. The results showed that aeration and Bacillus sp. injection will assist biological oxidation so that the bad odor substances can be removed. Based on the SRF values of the primary sludge and digested sludge, in which Alum and PAC were used, the appropriate amount of Alum aggregate reagent was judged to be 500 mg/L, and when PAC was used, 6 mg/L was judged to be appropriate.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.20 no.3
• /
• pp.202-207
• /
• 1987

Esterifying conditions to produce propylene glycol alginate (PGA) with alginic acid and propylene oxide were determined, and physico-chemical properties of the PGA were also determined. The rate of esterification increased with the content of propylene oxide up to 4 mole. Alginic acid containing $30\%$ of water shelved maximum esterification, however, it was dificult to remove the surplus moisture in the alginic acid when it cotained the moisture above $70\%$. Maximum esterification was taken place when alginic acid with $44.15\%$ water was reacted with 4mole of propylene oxide at $70^{\circ}C$. The rate of esterification of alginic acid with $50.05\%$ of water increased up to 1 hour at $70^{\circ}C$, followed by no significant increase with reaction time. No significant decrease in the viscosity of $2-3\%$ PGA solution occurred, up to pH 3.0. Pseudoplastic characteristics were kept in case of $1\%,\;2\%\;3\%$ and $5\%$ of PGA solution in the pH of 1.0-5.0.

• Applied Chemistry for Engineering
• /
• v.8 no.3
• /
• pp.543-549
• /
• 1997

The direct reaction of carbon dioxide($CO_2$) with butane($C_4H_{10}$) to obtain synthesis gas and hydrocarbon compounds have been studied on nickel loaded catalysts. In the reaction of $CO_2$ with $C_4H_{10}$, Ni loaded catalysts showed similar activity with Pt catalyst and Coke deposition on the catalyst was severe by dehydrogenation of butane. The main products were carbon monoxide and hydrogen, when alumina and Y type zeolite were used as a support. Instead, a great deal of aromatic hydrocarbons were obtained on the Ni loaded ZSM-5 catalyst. The conversion of $CO_2$ increased with the increasing molar ratio of $CO_2$/$C_4H_{10}$ on Ni/ZSM-5, Ni/NaY and Ni/alumina catalyst, but the conversion decreased again from the ratio of 2. The value of $CO_2$ conversion was the highest at the 5wt% of Ni loading on ZSM-5 catalyst. A part of cokes deposited on the catalysts diminished when only $CO_2$ gas or water steam flowed into the reactor. The coke deposited on the catalysts was very reactive and it may be an important intermediate for the carbon dioxide reforming reaction.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.11a
• /
• pp.40-40
• /
• 2000

우리나라의 제지산업은 천연펄프 자급능력이 20% 내외로서 낮은 실정이며 주원료의 7 70% 이상을 수입펄프와 고지에 의존하는 원료수급의 불균형이 심화된 상태이다 .. 1999년도 제지통계에 의하면 골판지 원지로 사용되는 라이너지와 골심지의 연간 생산량이 각각 169만 톤과 88만톤을 점유하여 국내 전체 지류생산량 887만톤의 약 29%를 점하고 있다. 이처럼 국내 제지산업에서 큰 비중을 차지하는 골판지 원지는 주로 국내에서 발생되는 고지를 원료 로 하여 생산되고 있어 환경친화적인 지류라 할 수 있다. 그러나, 국산 골판지 고지( Korean O Old Corrugated Container)의 경우 골판지 고지 이외에 각종 인쇄고지와 기타 산업용지가 혼합된 최하급지로서, 고지 재생 시 여러 가지 많은 제한요소를 지니고 있다. 국산 골판지 고지는 거듭된 재생처리로 인하여 미세분의 함량이 전체 지료의 절반에 달할 만큼 많으며, 아울러 섬유가 각질화됨에 따라 재생처리가 거듭될수록 그러한 미세분의 형성이 더욱 조장 되고 있다. 일반적으로 크기 75µm 이하의 무기질 및 단섬유를 일걷는 미세분은 골판지 원지 의 초지시 습지필의 탈수를 저해하여 생산성을 저하시키는 요인이 되어 왔다. 이러한 문제 를 해결하기 위해 선진국에서는 골판지 고지를 스크린 또는 클리너 둥으로 정선 처리하여 장단섬유를 분급한 다음, 장섬유분을 선택적으로 고해하여 종이의 강도를 향상시키는 기술 이 개발되어 적용돼 왔으나, 이러한 기술은 우리 나라와 같이 장섬유 보다 미세분 함량이 많은 저급의 골판지 고지를 주원료로 삼는 골판지 원지의 강도 개선에 큰 효과를 거둘 수 없는 기술이라고 판단된다. 이는 기존의 섬유 분급 처리는 고급 고지의 경우에는 효과적이 나 저급의 혼합고지를 100% 재활용하여 구성되는 국산 골판지의 생산 시에 적용하기에는 5 50-60%에 이르는 미세분이 포함되어 분리의 대상이 섬유장이 다른 펼프 섬유라기 보다는 미세섬유를 펄프섬유로부터 분리하는 것이 필요하기 때문이다. 이러한 문제점을 극복하기 위해서는 기포의 수력학적 포집작용을 이용하여 고농도의 미세분을 선택적으로 분급시키는 부상부 유 분급처리방법을 적용하였다. 이 방법은 미세분의 농축을 위한 부가적인 처리가 필요치 않으며, 분급에 천공을 이용하지 않기 때문에 분급처리 시 천공의 plugging 문제가 발생되 지 않는다는 장점도 가지고 있다. 미세분 분급을 위한 최적의 부상부유 조건은 장섬유의 응 집을 촉진하면서 미세분은 그러한 응집체에 포함되지 않은 상태로 자유로이 부상하여 걷혀 지는 경우이다. 응집거동을 조절하기 위한 시도로서 부상부유 처리시 유량을 달리한 실험결 과에 의하면 유량이 낮을수록 장섬유 손실이 줄고 미세분이 선택적으로 포집되나 전체 부상 부유 리젝트의 양이 줄어드는 문제점이 있었다. 이에 본 실험에서는 장섬유의 응집에 영향 하는 또 다른 인자로서 지료의 농도를 증가시키면서, 미세분의 부상부유를 촉진시키도록 유 량을 증가시키는 조건으로 부상부유 처리에 의한 미세분 분급효율을 증가시키고자 하였다.