• Ecology and Resilient Infrastructure
• /
• v.3 no.3
• /
• pp.156-161
• /
• 2016

An R&D project, 'Carbon Neutral Road Technologies Development', sponsored by the Korean Ministry of Land, Infrastructure, and Transport was performed and sustainable development is being discussed in relation to global climate change. A draft of the green highway certification system, the green highway design and construction technologies for making low carbon eco-friendly roads, and Green Highway Technology Investment Evaluation System (GTIES) for estimating and managing carbon emissions from roads have been developed from the results of the R&D project. A scheme for expanding the application of these technologies and building sustainable road systems by considering the concept of sustainability was proposed in this research.

• Bulletin of the Korea Photovoltaic Society
• /
• v.8 no.1
• /
• pp.9-19
• /
• 2022

전 세계적으로 탄소중립에 대한 중요도가 증가하면서 국내에서도 이를 위한 그린뉴딜 정책이 발표되었다. 태양전지는 탄소중립 실현을 위한 중요한 신재생에너지 중의 하나이며, 최근에는 실외 거치형 발전 시스템을 넘어 건축 창호 및 외벽, 자동차 선루프, IoT 센서 구동용 전원 등 다양한 분야에서 제품들과의 융합화를 위한 소재/시스템 기술이 개발되고 있다. 본 원고에서는 유기태양전지를 활용한 Product integrated 태양전지 소재 및 응용 기술에 대해서 살펴보고자 한다. 특히, 실내 조명을 이용한 유기태양전지 기술에 대해 자세히 논의하고자 한다.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.6
• /
• pp.382-390
• /
• 2012

Global warming has been hot issue world wide. Korea has been dealing with the global issue under the slogan of low carbon and green-growth such as setting national greenhouse gas (GHG) reduction targets and allocation to each industrial sector. Infrastructure construction, in which enormous social overhead capital (SOC) is input, has great role as one of the actions. Road is one of the representative infrastructure and large amount of resources is utilized in its construction, operation and maintenance stage. The estimation methodology of life cycle carbon emissions was developed and applied to a case study of highway currently under construction in this study. Also, total carbon emissions of all the highway in South Korea at present (2009) and cumulative carbon emissions from 2009 to 2020 were estimated using the results of case study.

• Clean Technology
• /
• v.28 no.3
• /
• pp.203-209
• /
• 2022

An environmental evaluation was conducted by employing LCA methodology for a mechanical seal manufacturing process that uses recycled silicon recovered from end-of-cycle PV modules. The recycled silicon was purified and reacted with carbon to synthesize β-SiC particles. Then the particles underwent compression molding, calcination and heat treatment to produce a product. Field data were collected and the potential environmental impacts of each stage were calculated using the LCI DB of the Ministry of Environment. The assessment was based on 6 categories, which were abiotic resource depletion, acidification, eutrophication, global warming, ozone depletion and photochemical oxidant creation. The environmental impacts by category were 45 kg CO₂ for global warming and 2.23 kg C₂H₄ for photochemical oxide creation, and the overall environmental impact by photochemical oxide creation, resource depletion and global warming had a high contribution of 98.7% based on weighted analysis. The wet process of fine grinding and mixing the raw silicon and carbon, and SiC granulation were major factors that caused the environmental impacts. These impacts need to be reduced by converting to a dry process and using a system to recover and reuse the solvent emitted to the atmosphere. It was analyzed that the environmental impacts of resource depletion and global warming decreased by 53.9% and 60.7%, respectively, by recycling silicon from end-of-cycle PV modules. Weighted analysis showed that the overall environmental impact decreased by 27%, and the LCA analysis confirmed that recycling waste modules could be a major means of resource saving and realizing carbon neutrality.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.108-108
• /
• 2022

기후변화는 전 지구 수문순환과 수자원 분포에 커다란 영향을 준다. 하지만 지금까지 관측되어온 지구상의 건조도 변화에 있어서 기후의 자연변동성의 영향과 인간활동에 의한 온난화의 영향을 명시적으로 밝힌 연구는 존재하지 않는다. 본 연구에서는 데이터 구동형 모델과 물리 모델을 이용해 관측 기반의 전구 수자원 분포를 1902년부터 2014년까지 재구축함으로써 지구의 평균온도가 약 1도 상승해온 지난 세기에 걸쳐 건기의 수자원 분포가 어떻게 변해왔는지 보인다. 재구축된 전구 변화 패턴은 인간활동에 의한 온실가스 증가등을 고려한 기후 모델 시뮬레이션과 흡사함을 알 수 있었으며 기후의 자연변동성만을 고려한 기후 모델 시뮬레이션에서는 발견되지 않았다. 주로 북아시아, 북미, 유럽 등 중위도 온대지방에서 더욱더 건조한 건기가 뚜렷하게 나타났으며 이는 강수량의 감소보다는 증발산의 증가에 기인하는 것으로 나타난다. 이와 같은 건조도의 변화는 미래 있어서 또한 인류에 대한 커다란 위협으로 자리한다. 미래 기후에서의 가뭄의 변화에 대해 다양한 연구들이 존재하지만 대부분 높은 수준의 온난화 (예를들어 RCP-SSP 585)에서의 영향에 국한된다. 다시 말해 인류가 21세기 중반에 달성을 목표로 하는 탄소중립이 가뭄의 측면에서 어떤 영향을 주게 될지에 대한 연구는 아직 충분하지 않다고 할 수 있다. 본 연구에서는 약한 혹은 중간 수준의 기후변화 시나리오를 이용해 파리협약에서 목표로 하는 1.5℃와 2℃ 상승에 따라 전 지구의 건조도 분포가 어떻게 변하고 그 변화에 있어서 어떠한 수문기후학적 메커니즘이 작용하는지 밝힌다. 지중해 연안 지역에서는 건조도의 가속이 +1.5℃와 +2℃사이에 존재하였으나 동아시아에서는 +1.5℃와 +2℃ 모두에서 습윤해짐을 알 수 있었으며 이러한 지역적 불균일성은 기후변화 대응 노력에 있어서 과거 온실가스 배출에 대한 책임뿐만 아니라 다양한 부문에 걸친 미래의 잠재 적응 노력 또한 고려해야만 함을 시사한다. 본 연구는 제6차 Coupled Model Intercomparison Project의 Land Surface, Snow, Soil-moisture Model Intercomparison Project (CMIP6/LS3MIP)와 Half a degree Additional warming, Prognosis and Projected Impacts (HAPPI)의 다중 모델 앙상블 시뮬레이션 결과를 이용했다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.3
• /
• pp.1-19
• /
• 2023

Bikes have recently emerged as an alternative to carbon neutrality. To understand the demand for public bikes, we endeavored to estimate travel frequency of public bike by considering the intermediate stops. Using the GPS trajectory data of 'Ttareungyi', a public bike service in Seoul, we identified a stay point and estimated travel frequency reflecting population, land use, and physical characteristics. Application of map matching and a stay point detection algorithm revealed that stay point appeared in about 12.1% of the total trips. Compared to a trip without stay point, the trip with stay point has a longer average travel distance and travel time and a higher occurrence rate during off-peak hours. According to visualization analysis, the stay points are mainly found in parks, leisure facilities, and business facilities. To consider the stay point, the unit of analysis was set as a hexagonal grid rather than the existing rental station base. Travel frequency considering the stay point were analyzed using the Zero-Inflated Negative Binomial (ZINB) model. Results of our analysis revealed that the travel frequency were higher in bike infrastructure where the safety of bike users was secured, such as 'Bikepath' and 'Bike and pedestrian path'. Also, public bikes play a role as first & last mile means of access to public transportation. The measure of travel frequency was also observed to increase in life and employment centers. Considering the results of this analysis, securing safety facilities and space for users should be given priority when planning any additional expansion of bike infrastructure. Moreover, there is a necessity to establish a plan to supply bike infrastructure facilities linked to public transportation, especially the subway.

• The Journal of Engineering Geology
• /
• v.33 no.4
• /
• pp.543-553
• /
• 2023

The current status of domestic a agalmatolite mines in South Korea was investigated with a view to establishing a stable supply of agalmatolite and managing its demand. Most mined agalmatolite deposits were formed through hydrothermal alteration of Mesozoic volcanic rocks. The physical characteristics of pyrophyllite, the main constituent mineral of agalmatolite, are as follows: specific gravity 2.65~2.90, hardness 1~2, density 1.60~1.80 g/cm³, refractoriness ≥29, and color white, gray, grayish white, grayish green, yellow, or yellowish green. Among the chemical components of domestic agalmatolite, SiO₂ and Al₂O₃ contents are respectively 58.2~67.2 and 23.1~28.8 wt.% for pyrophyllite, 49.2~72.6 and 16.5~31.0 wt.% for pyrophyllite + dickite, 45.1 and 23.3 wt.% for pyrophyllite + illite, 43.1~82.3 and 11.4~35.8 wt.% for illite, and 37.6~69.0 and 19.6~35.3 wt.% for dickite. Domestic agalmatolite mines are concentrated mainly in the southwest and southeast of the Korean Peninsula, with some occurring in the northeast. Twenty-one mines currently produce agalmatolite in South Korea, with reserves in the order of Jeonnam (45.6%) > Chungbuk (30.8%) > Gyeongnam (13.0%) > Gangwon (4.8%), and Gyeongbuk (4.8%). The top 10 agalmatolite-producing mines are in the order of the Central Resources Mine (37.9%) > Wando Mine (25.6%) > Naju Ceramic Mine (13.4%) > Cheongseok-Sajiwon Mine (5.4%) > Gyeongju Mine (5.0%) > Baekam Mine (5.0%) > Minkyung-Nohwado Mine (3.3%) > Bugok Mine (2.3%) > Jinhae Pylphin Mine (2.2%) > Bohae Mine. Agalmatolite has low thermal conductivity, thermal expansion, thermal deformation, and expansion coefficients, low bulk density, high heat and corrosion resistance, and high sterilization and insecticidal efficiency. Accordingly, it is used in fields such as refractory, ceramic, cement additive, sterilization, and insecticide manufacturing and in filling materials. Its scope of use is expanding to high-tech industries, such as water treatment ceramic membranes, diesel exhaust gas-reduction ceramic filters, glass fibers, and LCD panels.