• Membrane Journal
• /
• v.23 no.5
• /
• pp.375-383
• /
• 2013

Nanomaterials having large surface area, uniform dimensions or pores can be utilized in various membrane applications Amongst them, many studies have been focused on nanocarbon materials: graphene, graphene oxide and carbon nanotubes. Carbon nanotubes, one-dimensional structure, have excellent characteristics in thermal, chemical and mechanical strength properties. However, carbon nanotubes was mainly used to reinforce mechanical properties of polymer materials in previous applications. In contrast to previous studies, we focused on modified carbon nanotubes/polyethylene glycol diacrylate (PEGDA) composite membrane preparation for improvement of permeability and selectivity on gas separation.

• Computational Structural Engineering
• /
• v.4 no.1
• /
• pp.73-82
• /
• 1991

Recently, the finite element method has been sucessfully extended to treat the rather complex phenomena such as nonlinear buckling problems which are of considerable practical interest. In this study, a finite element program to evaluate the elasto-plastic buckling stress is developed. The Stowell's deformation theory for the plastic buckling of flat plates, which is in good agreement with experimental results, is used to evaluate bending stiffness matrix. A bifurcation analysis is performed to compute the elasto-plastic buckling stress. The subspace iteration method is employed to find the eigenvalues. The results are compared with corresponding exact solutions to the governing equations presented by Stowell and also with experimental data due to Pride. The developed program is applied to obtain elastic and elasto-plastic buckling stresses for various loading cases. The effect of different plate aspect ratio is also investigated.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.373-373
• /
• 2018

화력발전소, 석유화학공단 등 대규모 배출원에서 발생되는 이산화탄소를 활용하여 온실가스의 배출을 줄이고, 경제적 가치를 창출할 수 있는 탄소자원화는 기후변화 대응을 위한 국가전략프로젝트 중 하나이다. 전 세계적으로 탄소자원화 기술은 아직 상용화 단계이지만 최근 강화된 온실가스 감축 의무로 인하여 탄소자원화 시장은 더욱 확대될 전망이다. 화력발전소의 이산화탄소 발생 과정에서 배출되는 수증기는 응축기술을 통하여 새로운 수원으로 활용이 가능하다. 응축된 물의 최적 활용과 사용처 지향적 효율적 물순환을 위한 시설 내 스마트 워터 그리드(SWG) 개념의 물분배 시스템은 발전 산업 내에 탄소자원화의 핵심기술로 사용될 수 있다. SWG는 시설 내 용수공급 관리에서의 관망 운영, 물 수요 관리 등 ICT를 활용한 종합적인 물 분배 시스템으로, 본 연구에서는 SWG 물순환 시스템의 국내외 기술조사를 통해 발전 산업 시설 내에 적용성을 검토하였다. 물의 재이용 시스템을 포함한 SWG 기술, 지능형 관망 운영 기법 기술, 실시간 수질 감시 체계 기술 연구를 기반으로, ICT 기반 용수공급 정보 관리 기술과 수운영 모니터링 기술을 통하여 SWG가 발전 산업 연계 기술로써 적용될 수 있도록 하였다. 본 연구에서 제시된 SWG 시스템을 적용한 산업 인프라를 통하여 산업적 파급 효과를 높이고, 이를 활용한 인력과 비용 절감이 기대되며, 저에너지, 고효율화를 위한 기술력과 글로벌 물 시장진출 경쟁력을 향상시키기 위한 기초연구자료로써 활용이 가능할 것으로 기대된다.

• Korean Journal of Environment and Ecology
• /
• v.28 no.2
• /
• pp.142-149
• /
• 2014

This study has compared carbon storages, annual carbon uptakes and annual soil respiration by planting type in Dujeong park, Cheonan city. Four plantations were selected in Dujeong park: Pinus densiflora plantation, Quercus acutissima community, Quercus acutissima-Robinia pseudoacacia plantation, and Robinia pseudoacacia plantation. We investigated each plantations from February 2012 to March 2013. Carbon storage and annual carbon uptake in each plantations were calculated with allometric method (Lee, 2003), and soil respiration was measured by using LI-6400 (LI-COR). Carbon storages in Pinus densiflora plantation, Quercus acutissima community, Quercus acutissima-Robinia pseudoacacia plantation, and Robinia pseudoacacia plantation were $17.36tonCha^{-1}$, $88.63tonCha^{-1}$, $115.38tonCha^{-1}$ and 4$9.88tonCha^{-1}$, and annual carbon uptakes were $1.04tonCha^{-1}yr^{-1}$, $2.12tonCha^{-1}yr^{-1}$, $6.47tonCha^{-1}yr^{-1}$ and $3.67tonCha^{-1}yr^{-1}$, respectively. Average annual carbon uptakes per tree of Pinus densiflora plantation, Quercus acutissima community and Robinia pseudoacacia plantation were $1.81kgC{\cdot}treeyr^{-1}$, $17.86kgC{\cdot}treeyr^{-1}$ and $9.14kgC{\cdot}treeyr^{-1}$ and Quercus acutissima was the greatest. The amounts of carbon released from soil respiration in the same four plantations were $2.20{\mu}molCO_2m^{-2}s^{-1}$, $1.90{\mu}molCO_2m^{-2}s^{-1}$, $2.47{\mu}molCO_2m^{-2}s^{-1}$ and $2.51{\mu}molCO_2m^{-2}s^{-1}$, and annual soil respiration were estimated $6.66tonCha^{-1}yr^{-1}$, $5.33tonCha^{-1}yr^{-1}$, $7.20tonCha^{-1}yr^{-1}$ and $7.25tonCha^{-1}yr^{-1}$, respectively. In this study area, Quercus acutissima-Robinia pseudoacacia plantation has a significant contribution to the role of carbon sink. However, the contribution of Pinus densiflora plantation was evaluated less. The results of this study can be used as the necessary data for tree planting and management in urban park.

• KSBB Journal
• /
• v.11 no.2
• /
• pp.246-253
• /
• 1996

An obligatory methanotroph Methylosinus trichosporium OB3b was cultivated for the production of poly-${\beta}$-hydroxybutyric acid(PHB) in shake-flask using liquefied natural gas(LNG) as the sole source of carbon and energy. The maximal specific growth rate decreased by 40% using LNG compared with that obtained with pure methane. This is attributed to the inhibition by ethane and propane presents in the LNG as impurities. For the production of PHB, two-stage culture separating the production stage from the growth stage was carried out. PHB accumulation was observed after switching nutrient-sufficient to nutrient-limited condition of non-carboneous component (NO3-, PO43-, K+, Na+, Fe2+, or Mg2+). The limitation of K+ or Mg2+ resulted in relatively high PHB content, but the highest content was obtained by nitrate limitation. The optimal pH and temperature for PHB accumulation was 7.0 and $30^{\circ}C$. Under the optimal condition the maximal PHB content was about 45% after 4-day cultivation.

• Journal of Wetlands Research
• /
• v.13 no.3
• /
• pp.515-522
• /
• 2011

This study examined the epiphytes using stable isotopes. Separated epiphytes should represent the water quality. In study areas, where agricultural paddies were prevailing, biomass of epiphytes can increase nitrogen isotopes(${\delta}^{15}N$) and as a result decrease in carbon isotopes(${\delta}^{13}C$). Naerin stream and Inbuk upper areas showed higher nitrogen isotopes(${\delta}^{15}N$) than in Hangye and Buk stream. Also, stable carbon isotopes(${\delta}^{13}C$) in Naerin stream and Inbuk streams tended to increase than in Hangye and Buk stream. This can indicate the epiphytes can be a good indicator for water quality pollution.

• Korean Journal of Ecology and Environment
• /
• v.45 no.2
• /
• pp.242-251
• /
• 2012

To investigate foodweb of aquatic ecosystem in the Tamjin River, carbon and nitrogen stable isotopes ratios of aquatic organisms, as well as environmental indicators based on the water, were determined in this study. Various organisms such as fishes (Coreoperca kawamebari, Zacco platypus, Cobitis lutheri, and Pungtungia herzi) and periphyton (epilithon and epiphyte), and particulate- and coarse particulate organic matters (POM and CPOM) were collected in upper (Tamjin River, Yuchi Stream, and Omcheon Stream) and lower (TJ-1~TJ-5) reaches of Jangheung Dam. The nitrate concentration and ${\delta}^{15}N$ signature of POM and organisms (invertebrates and fish) were found to be more enriched toward the downstream section of the river. It was determined that allochthonous matter occurring from a tributary alters the chemical character of water, as well as the isotopic signature of organisms contained therein. Attached algae (ephilithon) were identified as a base component of the benthic foodchain further downstream.

• Journal of Life Science
• /
• v.16 no.4
• /
• pp.579-583
• /
• 2006

The influence of disinfectant on bacterial concentration and carbon usage patterns by Biolog GN plates were investigated for biofilm on carbon steel pipe. Heterotrophic bacterial concentrations were not different among non-, monochloramine- (1.0, 1.5 mg/l) and free chlorine- (0.5, 1.0 mg/l) treated samples (P = 0.56, ANOVA). However treatment of 1.5 mg/l free chlorine and 2.0 mg/l monochloraime showed significantly lower densities than control (P < 0.01, ANOVA). By the stepwise increasement of disinfectant concentration, the carbon usage activities of biofilm microflora were decreased after increase without the decrease of bacterial concentration, following reduction of cell density. Carbon usage patterns were qualitatively and quantitatively different with similar bacterial concentrations. Principal component analysis suggested that type and concentration of disinfectant were main factors on the usage of carbons. Our result suggest that the differences of bacterial communities were different among the samples and the need of monochloramine for the reduction of biofilm in drinking water.

• Composites Research
• /
• v.28 no.4
• /
• pp.239-243
• /
• 2015

Recent studies regarding the properties of carbon nanotubes (CNT) have made remarkable progress in CNT fibers research. However no CNT fibers showed the properties of CNTs because CNTs in fibers have weak interfacial bonding with low shear modulus in the pristine form. Thus, it is upmost interest to develop and employ post-production treatments to the CNT fibers that would potentially improve their properties. In this study, post-treatments resulted in improvement of strength of CNT fibers up to 40%.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.31 no.6
• /
• pp.282-286
• /
• 2021

Penetration depth and compressive residual stress of laser-carburized TiZrN coating by thickness of carbon paste were investigated in terms of carbon potential. The carbon paste was covered with a thickness of 1.1 mm using screen printing, and applied to a thickness of 0.4 mm using spin coating, and laser carburization was performed under the same conditions. As the thickness of carbon paste increased, the diffraction pattern of the laser-carburized TiZrN coating shifted to a lower angle, indicating solid solution strengthening and lattice distortion. For microstructure analysis using TEM, the defects and carbon concentration of the laser-carburized TiZrN coating increased as the carbon paste was thicker. It indicated that the variation of the carbon potential corresponds to the change in the paste thickness. In XPS depth profile analysis, high concentration of carbon and formation of carbide were observed in laser-carburized TiZrN coating with thick carbon paste. It revealed that the carbon concentration on the surface and carbon potential were changed by the thickness control of carbon paste. The compressive residual stress increased from 3.67 GPa to 4.58 GPa by the variation of carbon concentration.