• Journal of Korean Society of Forest Science
• /
• v.112 no.2
• /
• pp.188-194
• /
• 2023

This study aimed to derive the basic wood density, one of several carbon emission factors, for carbon accounting of bamboo forests in Korea. Bamboo is mainly distributed in Jeollanam-do and Gyeongsangnam-do provinces, and 101 sample trees were selected for each of the three species (Phyllostachys nigra var. henonis, P. bambusoides, and P. pubescens). The basic wood density derivation used the KS F 2098 method. The measurements showed that the basic wood density was 0.83 g/cm³ for P. nigra var. henonis, 0.81 g/cm³ for P. bambusoides, and 0.72 g/cm³ for P. pubescens. However, the bamboo distribution area in Korea is not very large, and P. pubescens grows in one area only. Therefore, the basic wood density that can be applied to bamboo was 0.79 g/cm³. Evaluation of the uncertainty of the extracted basic wood density showed a very low value of 1.61%, which confirmed the reliability of the basic wood density derived from this analysis. The basic wood density, biomass expansion factor, and root-to-shoot ratio were used to calculate the carbon storage capacity of one bamboo plant and expanded to calculate the capacity for a hectare of bamboo. Carbon storage and absorption of bamboo were calculated by applying a carbon-emission factor, such as the basic wood density. These study results are expected to contribute to the carbon-neutral policy and forest management direction in Korea.

• Spatial Information Research
• /
• v.20 no.1
• /
• pp.71-80
• /
• 2012

Carbon Point system is Climate Change Action Program by providing incentives in proportion to voluntary reduction of energy consumption such as electricity, gas and water for houses, commercial facilities. So far, existing researches have been limited to construction of GHG(Green House Gas) Inventory and have little attention to empirical impact analysis on carbon reduction policy regarding the residential section. Therefore, this paper is intended to provide convincing findings of impact analysis on carbon reduction, revolving around the carbon point system. For this, we firstly calculated the carbon emission by using electricity and gas usage data in household targeting to Seongbuk-Gu. Carrying out IPA and spatio-temporal analysis. Then, we are capable of visualizing spatial patterns from 2007 to 2009 as a macro analysis. Following that, we explored the effect on carbon point system through Ex ante-Ex post Analysis by paired t-test. To conclude, we can spatially identify the distribution with a significant difference between carbon emissions according to energy use as a micro analysis by Hot Spot to Analysis on point entities. It is to be hoped that this method will be utilized to establish various policies and to evaluate the effect of reduction of GHG.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.2
• /
• pp.220-227
• /
• 2016

In this paper, polychlorinated biphenyls (PCBs) were measured in surface sediments collected three times (June, October, December, 2013), inside Jeju Harbor as major harbors of Jeju Island. The concentration of PCBs inside Jeju Harbor was in the range of 1.62~4.45 (mean) ng/g on a dry weight basis and the levels were very low. In the analysis of PCBS homologue patterns, high-chlorinated PCB congeners were dominant in surface sediments inside Jeju Harbor, indicating that their sources were originated from shipping activity. In the relationships between PCBs concentrations and particle size (mud, sand and gravel) in surface sediments, PCBs concentrations were higher in the sediments with higher mud content, indicating that higher PCBs were distributed with increasing sediments of fine gradules. The PCBs concentrations in surface sediments in this study were very low, compared with ER-L (effect range-low) and TEL (threshold effects level) among sediment quality guideleines (SQGs) applied in foreign countries, such as USA, Canada, and Australia, etc), indicating that their biological effects on the bottom organisms in marine environment were expected to be very low.

• Journal of Korean Society of Forest Science
• /
• v.106 no.2
• /
• pp.258-266
• /
• 2017

This study was conducted to develop a carbon storage distribution map of Pinus rigida stands in Muju-gun by using of the National Forest Inventory data and digital forest map. The relationships between the stand variables such as height, age, diameter at breast height (DBH), crown density and aboveground biomass of Pinus rigida were analyzed. The results showed that the crown density had the highest positive correlation with a value of 0.74 followed by the height variable with value of 0.61. The aboveground biomass regression models were developed to estimate biomass and carbon storage map. The results of this study showed that the average carbon storage was 58.2 ton C/ha while the total carbon stock of rigida pine forests in Muju area was estimated to be 430,963 C ton.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.1
• /
• pp.59-65
• /
• 2018

Radon gas is a colorless, odorless, tasteless gas that occurs when uranium, a natural radioactive material in rocks and soils, collapses. 85% of the annual radiation exposure of the human body is due to natural radiation, of which 50% is radon. According to the US Environmental Protection Agency (EPA) survey, 62 out of 1,000 smokers and 7 out of 1,000 nonsmokers are exposed to lung cancer when exposed to radon gas for a long time. In order to reduce the risk of radon gas, activate carbon was used to fabricate matrix, and the pore properties and radon reduction properties were investigated. When the activate carbon was used, the radon gas concentration was drastically reduced and the graph was changed as the measurement period became longer. The pore distribution and microporous properties, which are one of the material properties of activate carbon, can be grasped.

• 대한공업교육학회지
• /
• v.32 no.2
• /
• pp.188-198
• /
• 2007

Platinum nanoparticles loading on carbon nanotube was carried out by impregnation of hexachloro platinate(IV) from hydrogen hexachloro platinate(IV) hydrate dissolved solution without using reduction agents, and heating the hexachloro platinate(IV) impregnated carbon nanotube up to $400^{\circ}C$. The amounts of impregnated hexachloro platinate(IV) on to carbon nanotube were measured with UV-visible spectrophotometer. The TG, XRD, and TEM analysis were performed to confirm the platinum particles loading and distribution on carbon nanotube. The average platinum particles size on carbon nanotube was under 2 nm by heating the hexachloro platinate(IV) up to $400^{\circ}C$ in spite of non-using reduction agents, while the average size increased due to the agglomeration of some particles by heating them up to $800^{\circ}C$. Therefore, uniformly distributed platinum nanoparticles loading on carbon nanotube can be obtained from simple impregnation of hexachloro platinate(IV) from solution and heating it up to $400^{\circ}C$.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.5
• /
• pp.259-279
• /
• 1999

Model tests on propped retaining walls were performed for the investigation of wall displacement, distribution of earth pressure, surface settlement and underground movement at various excavation stage in sand. The result of model tests on the trough of surface settlement showed considerable difference depending on the characteristic of wall stiffness, wall friction and soil condition. The location of maximum underground movement were found to be at range of 0.15H to 0. 1H(H: Final excavation depth). Effect of arching by the redistribution of earth pressure were closely related to the stiffness of wall as well as the soil condition. The wall displacement and earth pressure distribution were simulated by elasto - plastic beam analysis program and finite element method with GDHM model respectively. The result of elasto-plastic analysis showed some discrepancy on the wall displacement and earth pressure, but result of underground movement by FEM with various wall stiffness were in good agreement with the model tests.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.2
• /
• pp.285-299
• /
• 1993

The objective of the present study is to analyze material flow in the metal forming processes by using computer simulation and experiment with model material, plasticine. A UBET program is developed to analyze the bulk flow behaviour of various metal forming problems. The elemental strain-hardening effect is considered in an incremental manner and the element system is automatically regenerated at every deforming step in the program. The material flow behavior in closed-die forging process with rib-web type cavity are analyzed by UBET and elastic-plastic finite element method, and verified by experiments with plasticine. There were good agreements between simulation and experiment. The effect of corner rounding on material flow behavior is investigated in the analysis of backward extrusion with square die. Flat punch indentation process is simulated by UBET, and the results are compared with that of elastic-plastic finite element method.

• Korean Journal of Microbiology
• /
• v.38 no.2
• /
• pp.57-61
• /
• 2002

To investigate the characteristics of carbon sources utilization by the intestinal microflora of starfish, starfishes (Asterias amurensis) were collected from the South Sea near Jangheung-gun sumun-ri of Jeollanam-do on July 14,2000. The population densities of heterotrophic bacteria were in the range of $8.65{\pm}0.65{\times}10^3\cfu{\cdot}g^{-1}$ in the interval organs of starfish. Total 24 strains (Gram-negative bacteria. 11 strains, Gram-positive bacteria: 13 strains) from the internal organs of starfish were isolated. Dominant bacteria were Genus nbrio, Staphylococcus, and Corynebacterium. A high percentage of isolates was Gram positive rods. The catalase and oxidase positive were shown 54.2% and 20.8% of isolated bacteria, respectively. Isolated Gram negative and positive bacteria utilized various carbon sources. Among them, glucose could be utilized by all the isolated Gram negative bacteria, and sucrose, mannose, and maltose were utilized by a relatively high percentage of isolates. On the other hands, adipate and phenyl acetate were shown no utilization. In case of Gram positive bacteria, glucose was shown the highest utilization and the next highest utilization was fructose, trehalose, and maltose.

• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.40-47
• /
• 2015

본 연구에서는 일치환된 방향족 화합물의 $NO_2{^+}$ 치환반응에서의 반응성 (reactivity)과 지향성 (regioselectivity)에 대해 분석하였다. 기존의 연구에 따르면, 방향족 고리와 치환체 사이의 ${\sigma}$ 결합을 통한 유발효과와 ${\pi}$ 결합을 통한 공명효과로 인해 벤젠 고리의 전자 분포가 증가하게 되면 반응성이 증가하는 것으로 알려져 있다. 또한 반응중간생성물인 탄소양이온의 안정성을 통해 지향성을 확인할 수 있는 것으로 알려진 바가 있다. 이에 따라, 본 연구에서는 반응성과 지향성이 실험적으로 잘 알려진 7가지의 치환기 (OH, $OCH_3$, $CH_3$, Cl, COOH, CN, $NO_2$)를 선정하여 DFT functional인 B3LYP를 사용하여 natural bond orbital (NBO) 계산을 하였고, 각각의 일치환된 벤젠 고리가 갖는 전자 분포를 ${\sigma}$와 ${\pi}$ 전자로 나누어서 보기로 했다. 그 결과, 일치환된 방향족 고리 치환반응의 반응성과 지향성은 ${\sigma}$ 결합을 통한 유발효과에 의해서는 영향을 받지 않고, 공명 효과로 인한 반응물의 ${\pi}$ 전자 분포에 의해 결정되는 것을 확인할 수 있었다. 이외에도 반응성을 비교 하기 위해 친핵체로 작용하는 일치환된 방향족 고리의 highest occupied molecular orbital(HOMO) 에너지와 친전자체인 $NO_2{^+}$의 lowest unoccupied molecular orbital (LUMO) 에너지의 차이를 비교하였으며, 친핵체의 HOMO 에너지가 높을수록 반응성이 커짐을 알 수 있었다.