• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.18-20
• /
• 2009

입자 강화 복합재료 내에서의 다양한 손상 메커니즘은 복합재료의 전체 거동을 예측에 상당한 영향을 미친다. 이에 본 연구에서는 입자 강화 복합재료 내에서의 누적 손상을 고려한 미세역학 기반 탄소성 모델(Kim and Lee, 2009)을 소개하고자 한다. Kim and Lee (2009)에 의해서 입자 강화 복합재료의 탄소성 모델을 위해 입자 강화 복합재료 내 계면에서의 누적 손상 및 기지재의 연성 거동이 고려되었다. 제안된 모델을 이용한 입자 강화 복합재료의 탄소성 거동 예측값은 관련된 실험값 (Llorca et al., 1991)과의 비교를 통해 수치해석을 수행하였다.

• Composites Research
• /
• v.18 no.3
• /
• pp.1-6
• /
• 2005

Carbon nanofiber exhibits superior and of ien unique characteristics of mechanical, electrical, chemical and thermal properties. Despite of the excellent properties of carbon nanofiber, the properties of carbon nanofiber filled polymer composites were not increased largely. The reason is that it is still difficult to ensure the uniform dispersion of carbon nanofiber in a polymer matrix. In this study, for improvement of the mechanical properties of composites, carbon nanofiber reinforced hybrid composites was investigated. For the dispersion of carbon nanofiber. solution blending method using ultrasonic was used. Dispersion of carbon nanoifiber was observed by scanning electron microscope (SEH). Mechanical properties were measured by universal testing machine(UTM).

• Composites Research
• /
• v.17 no.6
• /
• pp.1-7
• /
• 2004

The studies of particulate reinforced composites have been conducted for many years. The nanocomposites to be studied vigorously in recent years are one of them. We fabricated and studied multi-walled carbon nanotube(MWNT)/epoxy composites which may be useful as matrix for continuous fiber-reinforced composites. We investigated tensile properties of MWNT/epoxy composites as a function of MWNT concentration, which were prepared by the fabrication method established in this study. Tensile stiffness and strength increased 19% at 0.5 wt% and 12% at 0.2 wt%, respectively. We observed the reaggregation phenomenon of MWNTS during curing, which should be controlled to obtain higher tensile properties.

• Composites Research
• /
• v.31 no.5
• /
• pp.282-287
• /
• 2018

In this paper, we explore interfacial properties of the mineralized CNTs when they are employed as reinforcing fillers in a polymer nanocomposite using molecular dynamics (MD) simulations. Recently, several studies on mineralizing carbon nanotubes (CNTs) with an aid of nitrogen doping to CNTs have been reported. However, there is a lack of studies on the reinforcing effects of the mineralized CNTs when it is employed as a filler of nanocomposites. Silica ($SiO_2$) is used as a mineral material and poly (methyl metacrylate) (PMMA) is used as a polymer matrix. Pull-out simulations are conducted to obtain the interfacial energy and the interfacial shear stress. It was found that the silica mineralized CNTs have higher interfacial interaction with the polymer matrix. In the future, by examining various thermomechanical properties of the mineralized-CNT-filler/polymer nanocomposites, we will search for potential applications of the novel reinforcing filler.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.1A
• /
• pp.115-123
• /
• 2008

The performance prediction of fiber-reinforced composites has attracted engineer's attention in many fields, and the various theoretical and numerical methods have been proposed to predict the behavior of the fiber-reinforced composites. An evolutionary damage model for progressive interfacial debonding between circular fibers and the matrix is newly incorporated into the micromechanics-based elastoplastic model proposed by Ju and Zhang (2001) in this framework. Using the proposed model, a series of numerical simulations are conducted to illustrate the elastoplastic behavior and evolutionary damage of the framework. Furthermore, the influence of the evolutionary interfacial debonding on the behavior of the composites is investigated by comparing it with the result of a stationary damage model.

• Composites Research
• /
• v.19 no.3
• /
• pp.23-28
• /
• 2006

Carbon nanotubes reinforced copper matrix laminated nanocomposites were developed and the mechanical properties were evaluated by using micro-tensile testing system. Sandwich-type laminated structure constituted with carbon nanotube layers as a reinforcement and electroplated copper matrix were fabricated by a new processing approach based on selective dip-coating of carbon nanotubes. The mechanical properties of nanocomposites were improved due to an enhanced load sharing capacity of carbon nanotubes homogeneously distributed within the in-plane direction, as well as a bridging effect of carbon nanotubes along the out-of-plane direction between the upper and lower matrices. The universality of the layering approach is applicable to a wide range of functional materials, and here we demonstrate its potential use in reinforcing composite materials.

• Composites Research
• /
• v.26 no.3
• /
• pp.147-154
• /
• 2013

Nanocarbons such as carbon nanotubes (CNT) and graphene are considered to be ideal fillers for polymer composites, because of their outstanding mechanical properties and high length-to-diameter ratio. There has been much effort to realize the implementation of their full potential, but a large number of unsolved problems still must be challenged, for example, effective processing for fabrication. This review deals with the progress that has already been made in the area of nanocarbon polymer composites using CNT and graphene. Mechanical reinforcement of various nanocarbon polymer composites is analyzed and compared, and future perspectives in research and development that need to be done are discussed.

• Polymer(Korea)
• /
• v.28 no.4
• /
• pp.285-290
• /
• 2004

Nondestructive damage sensitivity of carbon nanotube(CNT) and nanofiber (CNF)/epoxy composites with their adding contents was investigated using electro-micromechanical technique. Carbon black (CB) was used only for the comparison with CNT and CNF. The fracture of carbon fiber was detected by acoustic emission (AE), which was correlated to the change in electrical resistance, ΔR under double-matrix composites (DMC) test. Stress sensing on carbon nanocomposites was performed by electro-pullout test under uniform cyclic loading. At the same volume fraction, the damage sensitivity for fiber fracture, matrix deformation and stress sensing were highest for CNT/epoxy composite, whereas for CB/epoxy composite they were the lowest among three carbon nanomaterials (CNMs). Damage sensitivity was correlated with morphological observation of carbon nanocomposites. Homogeneous dispersion among CNMs could be keying parameters for better damage monitoring. In this study, damage sensing of carbon nanocomposites could be evaluated well nondestructively by the electrical resistance measurement with AE.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.554-557
• /
• 2010

본 논문에서는 동일한 체적분율 가지는 탄소나노튜브 나노복합재의 기계적 특성을 규명하였다. 동일한 chirality를 가지는 서로 다른 크기의 탄소나노튜브를 이용하여 탄소나노튜브의 크기가 복합재의 물성에 미치는 영향을 규명하였다. 복합재료의 분자동역학의 결과 탄소나노튜브의 길이방향의 물성은 크게 증가하나, 전단특성의 물성 강화효과를 나타나지 않았다. 이는 통해 탄소나노튜브와 기지재료 사이의 상호작용력이 복합재료의 전단력을 전달하고, 변형을 유지할 만큼 강하지 않다는 것을 확인하였다. 이와 같은 분자동역학 결과를 바탕으로 멀티스케일 모델을 개발하여 복합재료에서 나타나는 현상을 묘사하였다. 제안된 멀티스케일 모델을 이용하여 다양한 조건의 복합재료에 대한 특성 예측이 가능하다.

• Composites Research
• /
• v.27 no.1
• /
• pp.14-18
• /
• 2014

Carbon Fiber Reinforced Plastic (CFRP) has strong and superb material properties, especially in mechanical and heat-resisting aspects, but the drawback is its high price. In this study, we made a hybrid composite using carbon fiber and basalt fiber, which is expected to attribute to its strong material properties and its financial benefits. We found out that the higher the content of basalt fiber included, the lower the intensity, and carbon's intensity contents of 80% showed the similar intensity level as that of CFRP. Besides it was possible to get a better mechanical properties using the composite that included the mixed fiber, instead of using a composition of separate fibers filed.