• Journal of the East Asian Society of Dietary Life
• /
• v.18 no.4
• /
• pp.524-530
• /
• 2008

In this study, the effects of feed containing citrus byproducts on the physicochemical characteristics and palatability of Korean native chickens were investigated. The Korean native chickens used in this study were divided into two groups: T0 (chickens that were not fed citrus byproducts until they were 39 weeks old) and T1 (chickens that were fed citrus byproducts). The feed given to the T1 chickens was the same as that given to the T0 chickens for the first 16 weeks. Between weeks $17{\sim}39$, the feed given to the T1 chickens was prepared by adding 4% of the citrus byproducts to the feed given to the T0 chickens. The chickens used in the experiment were chilled for 2 days after being sacrificed. The feed containing citrus byproducts did not cause any statistically significant differences in the breast and thigh characteristics of lightness ($L^*$ value), redness ($a^*$ value), yellowness ($b^*$ value), water-holding capacity, frozen loss, thawing loss and boiling loss. As for the rheological properties, there was no statistically meaningful difference in the breast/thigh characteristics of springiness, cohesiveness, gumminess, and chewiness between the T0 and T1 chickens. However, hardness and shear force were significantly lower in the T1 chickens than in the T0 chickens (p<0.05). The acid and peroxide values were also lower in the T1 chickens than in the T0 chickens, but the difference was not statistically significant. Antioxidant activity was better in the T1 chickens than in the T0 chickens. Thus, the results of the present study show that consumption of citrus byproducts did not affect the color and smell of raw meat. The palatability of boiled meat was significantly better in the T1 chickens than in the T0 chickens.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.12 no.1
• /
• pp.7-11
• /
• 1983

The purpose of this study was to prepare low methoxyl pectins (LMPs) by pectinesterase (PE) using waste tangerine peels and to compare the chemical, physical and gelling properties of the prepared pectins with the commercial LMP. The LMPs were prepared by treating albedo with 0.25M $Na_2CO_3$ to activate the PE. PE was then inactivated by heating. The sample was centrifuged and the supernatant was collected. LMP was obtained as precipitate by adding alcohol to the collected supernatant. The amounts of extractible pectins in albedo were 12.71~12.98% on a dry weight basis. Methoxyl contents of LMPs prepared by treating albedo with PE at pH 7.5 for 10min, at pH 8.5 for 10min, 20min and 30min were 5.12%, 4.27%, 3.08%, 1.85% respectively, demonstrating that the methoxyl contents of the preparations decreased as the degree of treatment albedo with PE increased. The acetyl contents of the preparations ranged from 0.09% to 0.12%, the values of which do not interfere with gel formation. The anhydrouronic acid contents of the prepared pectins were in the range of 94.2%~94.8%. The values of viscosity and molecular weights of the prepared LMPs tent to decrease as the degree of PE action on albedo increased. The textural value of the prepared LMP gels determined by Consistometer, Ridgelimeter and Instron denonstrated that the excess treatment of albedo with PE significantly impaired the gelling properties of the preparations.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.6
• /
• pp.751-758
• /
• 2017

The objective of this study was to determine the effects of moisture content and screw speed on the physical properties of extruded soy protein isolate (SPI). Expansion index, water absorption index, texture, integrity index, color, and nitrogen solubility index of extruded SPI were analyzed to determine the relationship with extrusion conditions. Extrusion conditions were moisture content (40, 50, and 60%) at a fixed die temperature ($140^{\circ}C$) and screw speed (250 rpm). The other extrusion conditions were screw speed (150, 250, and 330 rpm) at a fixed moisture content (55%) and die temperature ($140^{\circ}C$). Specific mechanical energy (SME) input decreased as moisture content increased from 40 to 60%. However, SME input increased as screw speed increased from 150 to 330 rpm. Expansion ratio and piece density decreased as moisture content and screw speed increased, and specific length increased as moisture content and screw speed increased. The extruded SPI at 40% moisture content had higher water absorption index, texture, and color differences than those of the extruded SPI at other moisture contents (50 and 60%). however, the extruded SPI at 40% moisture content had lower integrity index and cutting strength than those of the extruded SPI at other moisture contents (50 and 60%). In conclusion, the physical properties of extruded SPI were more affected by moisture content than screw speed.

• Korean journal of food and cookery science
• /
• v.18 no.6
• /
• pp.644-654
• /
• 2002

Brown color characteristics and antioxidizing activities were investigated for Doenjang under different processing conditions. Doenjang A was prepared directly from Meju and saline solution whereas Doenjang B was Prepared after separating soy sauce by soaking for 45 days. Both Doenjangs were aged for up to 180 days. Antioxidizing activity was studied in relation to the brown color characteristics using fat-soluble extract and water-soluble extract of Doenjang. The intensity of brown color was higher in the water-soluble Doenjang extract than the fat-soluble Doenjang extract. In the UV-VIS scanning spectra, water-soluble Doenjang extracts showed significant changes as the aging proceeded, but fat-soluble Doenjang extract did not. Antioxidizing activity of fat-soluble Doenjang extract increased as the aging period extended; however, no significant difference was detected in the water-soluble extract. Overall, Doenjang A showed higher contents of amino acids, reducing sugar, brown color, and antioxidizing activity, and the antioxidizing ability was higher in water-soluble Doenjang extract rather than in the fat-soluble Doenjang extract.

• Journal of Korea Multimedia Society
• /
• v.9 no.7
• /
• pp.872-893
• /
• 2006

In this study, I classify the elements of physiognomic judgment of character with regard to form and meaning from a visual perspective based on physiognomic judgment of character study in 'the cosmic dual forces and the Five Elements theory'. Individual characters for each type are designed using graphic data. Based on that, design system of individual characters for each personality type is investigated using Neural Network system. Faces with O-Haeng (Five Elements) shapes are shown to constitute the system with ${\pm}0.3%$ degree of error tolerance for the non-loaming input data. For the shapes of Chinese characters 'tree, fire, soil, gold and water', their MSE(Mean Square Error) are 0.3, 0.3, 0.2, 0.5, 0.2. It seems to be the best regarding the scoring system which ranges from 0 to 5. Therefore, this system might be regarded to produce the most accurate facial shape of character automatically when we input character's personality we desire to make.

• Journal of the Korean Society of Food Culture
• /
• v.20 no.4
• /
• pp.426-432
• /
• 2005

To develop a low-temperature and long-term fermented Baechu kimchi, kimchi was prepared according to a recipe of specific ratio with major and minor ingredients and adjusted its final salinity to 3.7%. Baechu kimchi fermented at $15{\pm}1^{\circ}C$ 24 hours and transferred them into in a refrigerator only for kimchi, and then continued to ferment at $-1{\pm}1^{\circ}C$ for 30 weeks to make a low-temperature and long-term fermented kimchi. The initial cutting force of 8.45kgf dropped gradually and reached to 5.19kgf after 30 weeks of fermentation. In compression force the gumminess, hardness and chewiness of Baechu kimchi showed a great decrease during the fermentation, but the springiness and adhesiveness increased in slight. Correlation coefficient between the chewiness and gumminess was the highest(r=0.879). In spite of sensory evaluation scores of the appearance and texture were the highest on 0 day of fermentation, the saltiness was evaluated the worst to eat. Scores for sourness and carbonated flavor were the best during 18 to 22 weeks of fermentation, and overall acceptability was the best after 14 weeks of fermentation. Very high correlation coefficients were revealed between the sourness and carbonated flavor(r=0.813) and between the sourness and off-flavor(r=0.805). According to these results we concluded that the best low-temperature and long-term fermented Baechu kimchi prepared with 3.7% salinity and fermented at $15{\pm}1^{\circ}C$ for 24 hours and then transferred into a kimchi refrigerator at $-1{\pm}1^{\circ}C$, and completed the fermentation for 18 weeks.

• Journal of the Korean earth science society
• /
• v.25 no.8
• /
• pp.774-783
• /
• 2004

The S wave velocity and Q$s^{-1}$ structure of the uppermost part of the soil in Nakdong Delta area have been obtained to determine the characteristics of the forementioned soil. The phase and attenuation coefficients of multichannel seismic records were inverted to obtain the S wave velocity and Q$s^{-1}$ structure of the soil. The inversion results have been compared with the borehole measurements of the area. The seismic signal of the nearest geophone from a seismic source was used as the source signal to obtain the attenuation coefficients. Amplitude ratios of the signal at each geophone to the source signal wave plotted as a function of distance for the frequency range between 10 Hz and 45 Hz. The slope of a linear regression line which fits amplitude ratio-distance relationship best for a given frequency was used as the attenuation coefficients for the frequency. The dispersion curve of Rayleigh waves and the attenuation coefficients were inverted to obtain the S-wave velocity and Q$s^{-1}$, respectively, in the uppermost 8 meter of soil layer. The borehole measurements of the area show that are two distinct layers; the upper 4 meter of silty-sand and the lower 4 meter of silty-clay. The inversion results indicate that the shear wave velocity of the upper layer is 80 m/sec and 40m/sec in the lower silty-clay layer. The spacial resolution of the shear wave velocity structure is very good down to a depth of 8 meter. The Q$s^{-1}$ in the upper silty-sand layer is 0.02 and increase to 0.03 in the lower silty-sand layer. The spacial resolution of quality factor is relatively good down to a depth of 5 meter, but very poor below the depth. In this study, the S-wave velocity is higher in the silty-clay and the Q$s^{-1}$ is smaller silty-sand than in the silty-clay. However, much more data should be analyzed and accumulated before making any generalization on the shear wave velocity and Q$s^{-1}$ of the sediments.

• Clinical and Experimental Pediatrics
• /
• v.45 no.9
• /
• pp.1065-1074
• /
• 2002

Purpose : The purpose of this study is to analyze the epidemiologic characteristics of sudden unexpected death in infancy and to evaluate the importance of postmortem autopsy. Methods : We reviewed, retrospectively, medical records of 34 infants admitted to Kangnam General Hospital from January 1987 to December 2001 because of sudden unexpected death. We investigated the cause of death through medical history, death scene examination, autopsy findings, acylcarnitine and organic acid analysis. Results : Among the total 34 infants, 18 were male(52.9%) and 16 were female(47.1%). Thirty infants(88%) were below the six months of age. Winter was the most affected season(38.2%). Eighteen infants(52.9%) died between 6 and 12AM. The prone sleeping position was observed more frequently than the supine position at death; nine cases in the prone position, six cases in the supine position. The cause of death of 23 cases could not be found by only history and death scene examination. Autopsy was done in 13 cases. Seven cases of them were thought to be SIDS. In six cases, we explained the cause of death with autosy findings. They were an endocardial fibroelastosis, a nesidioblastosis, a subdural hematoma, a bronchopneumonia and two fatty changes of liver. Metabolic screening tests performed in three cases to rule out metabolic disorder since 2000 were all normal. Conclusion : We concluded that autopsy and metabolic screening test should be performed to find out the cause of death in sudden unexpected death in infancy.

• Asian Journal of Turfgrass Science
• /
• v.20 no.1
• /
• pp.33-40
• /
• 2006

Many soil amendments have been used nowadays to improve physical and chmical condition of turf soil, which might ultimately optimize turfgrass growth in golf courses. This study was carried out to Investigate the effects of new organic soil amendment containing pig excreta 50% and sawdust 50% on growth of zoysiagrass (Zoysia japonica L.) and kentucky bluegrass (Poa pratensis L.) in greenhouse. Three applicable treatments with soil mixtures of 10, 20, and 30% (v/v) animal organic soil amendment (AOSA) with sand, were tested for chemical property, physical property, visual quality and root length of zoysiagrass and Kentucky bluegrass. As results, application of $10{\sim}30%$ AOSA mixtures were proper to grow turfgrass in soil nutrition. Especially, the treatment with 20% AOSA mixtures showed 0.7% in organic matter, which meets to green standard of USGA. Also, 30% AOSA mixtures was 1.1% in organic matter, which might be desirable for zoysiagrass-planted golf courses in Korea. It was turned out that addition of AOSA decreased the hydraulic conductivity in soil physical property Because the sand possess high hydraulic conductivity, it is recommended to combine $10{\sim}30%$ AOSA with sand in order to sustain soil balance. The treatment with $10{\sim}30%$ AOSA noticeably increased visual quality of both zoysiagras and Kentucky bluegrass during 90 days. However, treatments with either 20% or 30% AOSA were effective to develop root length of zoysiagrass but treatments with 20% AOSA were more effective than that of 30% AOSA mixtures to promote root length of Kentucky bluegrass at 60 days. In conclusion, considering all vital factors such as visible quality, root growth, organic matter content, and economical efficiency, was taken, it is recommended that a $20{\sim}30%$ mixture of AOSA with sand is good for the growth of zoysiagrass and 20% mixture for Kentucky bluegrass.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.9
• /
• pp.279-287
• /
• 2018

Sealants are an important element of modern architecture and serve as a building protection against weathering by providing barriers against ingress of moisture, air, and other materials. Exposure to a variety of environments often reduces lifespan due to changes in physical, chemical and mechanical characteristics, and UV, humidity, and temperature expansion are important issues that are directly related to durability. In this study, a combined deterioration test chamber was developed to simulate the environment of the open air as an instrument for verifying the durability of structural sealing materials indoors. In order to replicate special weather conditions, such as yellow dust, acid rain, and contamination by microorganisms, it was deemed impossible to replicate the outdoor environment by 100 %, and the results of the results of the results of the external exposure test of the structural sealant and the combined deterioration testing device. As a result of the displacement test of the outdoor exposure test, it was determined that the sealant was breaking apart and that it would be smooth, and the displacement would be up to three times greater than the initial material value of 1 year. The displacement test results of the combined deterioration test device show the tendency to deteriorate, decreasing the elasticity and tensile characteristics. In the case of denatured silicon, the current 400 cycles have been completed to confirm 12 months of degradation of the external exposure. The deformation of the test specimen cannot be verified with the naked eye, so it is considered that the conditions of the specimen are more stable than the silicon sealant. As a result of the outdoor exposure test, if the combined deterioration test device is structured and proposed in the relevant guidance or specification, the anticipated lifespan of 12 months in the actual use environment can be verified indoors and below 3 months later, economically.