• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.1
• /
• pp.9-15
• /
• 2011

The influence of the strain-rate on the superelastic behaviors of shape memory alloys (SMAs) wires is experimentally and numerically investigated. The one-dimensional SMA constitutive equations considering strain-rate effect is developed. The evolution of stress-strain curves of SMA wires is examined with various strain-rates. Results show that the superelastic behaviors of SMAs may significantly be changed depending on the variation of strain-rate.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.2
• /
• pp.129-134
• /
• 2010

The influence of the strain-rate on the thermomechanical characteristics of shape memory alloys (SMAs) is numerically investigated. The three-dimensional SMA constitutive equations of strain-rate effect is developed. The strain-rate effect is taken into account by introducing a coupling equation between the production rate of martensite and the temperature change. For the numerical results, the SMA algorithm is implemented into the ABAQUS finite element program. Numerical simulation shows that the pseudoelasticity of SMA may significantly be changed by considering the strain-rate due to the temperature change.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.93-93
• /
• 2004

형상기억합금은 2원 또는 3원 합금에 의해 외력과 온도 변화에 따라 오스테나이트 상과 마르텐사이트 상으로의 상변환을 유발한다. 이와 같은 형상기억합금은 두 가지의 고유한 특성으로 인해 최근에는 의학용 기구나 소형 액츄에이트 및 여러 분야에서 적용되어지고 있다. 이때 형상기억합금의 고유한 특성은 모상인 오스테나이트 상의 형상을 기억하여 외력에 의해 마르텐사이트 상으로 변형된 후에도 오스테나이트 종료온도 이상으로 가열하게 되면 원래의 형상으로 되돌아가는 형상기억 효과와 오스테나이트 종료온도 이상에서 넓은 탄성 영역을 가지는 초탄성 효과 등이다.(중략)

• Journal of the Microelectronics and Packaging Society
• /
• v.30 no.4
• /
• pp.50-60
• /
• 2023

Ball Grid Array (BGA) is a widely used package type due to its high pin density and good heat dissipation. In BGA, solder balls play an important role in electrically connecting the package to the PCB. Therefore, understanding the inelastic deformation of solder balls under various mechanical loads is essential for the robust design of semiconductor packages. In this study, the geometrical effect on the inelastic deformation and fracture of solder balls were analyzed by finite element analysis. The results showed that fracture occurred in both tilted and hourglass shapes under shear loading, and no fracture occurred in all cases under compressive loading. However, when bending was applied, only the tilted shape failed. When shear and bending loads were combined with compression, the stress triaxiality was maintained at a value less than zero and failure was suppressed. Furthermore, a comparison using the Lagrangian-Green strain tensor of the critical element showed that even under the same loading conditions, there was a significant difference in deformation depending on the shape of the solder ball.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1986.11a
• /
• pp.47-51
• /
• 1986

로울러 베어링의 로울러는 길이방향으로 적당하게 Profiling하여 양단부에서 발생하는 응력집중을 줄이고 있다. 로울러와 레이스간의 접촉을 단순한 탄성접촉문제로 해석하는 경우에는 유막의 개념이 없어서 로울러와 레이스 사이의 압력분포와 유막형상을 정확하게 나타내기가 어려우므로 탄성변형과 압력에 따른 윤활유의 점도 변화를 고려한 탄성유체윤활(EHL)해석이 필요하다. 대부분의 해석은 무한장 로울러로 취급하는 것이 보통이며 실제의 로울러에 해당하는 유한한 길이의 선접촉 EHL 해석은 Mostofi & Gohar 및 Kuroda & Arai의 해석 정도이나 각각은 수렴하중이 작거나 로울러의 길이가 아주 짧은 경우에 해당한다. 본 연구에서는 FDM과 Newton-Raphson method를 이용하여 길이가 유한한 실제 크기의 Profiled 로울러에 대한 EHL상태에서의 압력분포와 유막형상을 보다 하중이 온 경우에 대해서 구하고자 한다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.224-227
• /
• 2011

케이블구조의 기하학적 비선형해석을 위한 탄성포물선 케이블요소를 제시한다. 탄성현수선 케이블요소에 대한 적합조건과 접선강도행렬을 토대로 장력이 충분히 도입되어 자중에 의한 처짐 형상이 포물선에 가깝다는 가정 하에서 무응력길이를 포함하는 탄성포물선 케이블요소의 비선형 힘-변형관계식과 접선강도 행렬을 구한다. 또한 현(chord)방향으로 두 케이블요소의 등가 공칭장력식을 정의한다. 탄성포물선 케이블 요소의 수치적인 정확성을 확인하기 위하여, 경사진 케이블을 탄성현수선과 탄성포물선 케이블요소로 각각 모델링하여 매개변수 해석을 수행하고 비교, 분석한 결과를 제시한다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.192-195
• /
• 2010

본 논문에서는 해상 크레인과 중량물의 동적 거동을 시뮬레이션하기 위해, 유한 요소 정식화(finite element formulation)를 이용하여 해상 크레인의 붐(boom)을 탄성체로 모델링 하였다. 붐은 3차원 탄성 빔(beam) 요소로 가정하고, 각 요소의 변형에 의한 변위는 형상 함수(shape function)과 절점 좌표(nodal coordinate)를 이용하여 정의하였다. 변형 변위를 이용하여 탄성 붐의 강성 행렬(stiffnes matrix)을 유도하고, 탄성 변위를 포함하는 위치 벡터를 이용하여 질량 행렬을 유도한다. 해상 크레인과 중량물로 이루어진 운동 방정식에 탄성 붐을 포함하여 유연 다물체계(flexible multibody system) 운동 방정식을 구성한다. 외력으로는 선박 유체정역학적 힘, 유체동역학적 힘, wire rope의 장력, 중력 그리고 계류력(mooring force)이 고려되었다. 먼저 요소의 개수를 변경하며 탄성 붐의 동적 거동을 시뮬레이션 하여, 유한 요소 정식화를 이용한 모델링의 타당성을 검증하였다. 그리고 해상 크레인과 중량물의 동적 거동 시뮬레이션에 탄성 붐 모델을 적용하였다.

• Composites Research
• /
• v.25 no.1
• /
• pp.1-8
• /
• 2012

In order to predict the thermoelastic behavior of porous composites, poroelastic parameters are measured by using micromechanics-based finite element models. The expanding deformation caused by pore pressure, and the degradation of homogenized elastic moduli with pores are calculated for the assessment of the poroelastic parameters. Various representative volume elements considering the shape, size, and array pattern of pores are modeled and analyzed by a finite element method. The effects of porosity and material anisotropy, and the distribution of stain energy density are investigated carefully. In addition, the measured poroelastic parameters are verified by predicting the thermo-pore-elastic behavior of carbon/phenolic composites.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.1
• /
• pp.85-92
• /
• 2015

This article presents the dynamic instability response of sigmoid functionally graded material plates on elastic foundation using the higher-order shear deformation theory. The higher-order shear deformation theory has ability to capture the quadratic variation of shear strain and consequently shear stress through the plate thickness. The governing equations are then written in the form of Mathieu-Hill equations and then Bolotin's method is employed to determine the instability regions. The boundaries of the instability regions are represented in the dynamic load and excitation frequency plane. The results of dynamic instability analysis of sigmoid functionally graded material plate are presented using the Navier's procedure to illustrate the effect of elastic foundation parameter on dynamic response. The relations between Winkler and Pasternak elastic foundation parameter are discussed by numerical results. Also, the effects of static load factor, power-law index and side-to-thickness ratio on dynamic instability analysis are investigated and discussed. In order to validate the present solutions, the reference solutions are used and discussed. The theoretical development as well as numerical solutions presented herein should serve as reference for the dynamic instability study of S-FGM plates.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.3
• /
• pp.875-888
• /
• 2013

The researches have recently progressed toward the use of the superelastic shape memory alloys (SMAs) to develop new smart control systems that reduce permanent deformation occurring due to severe earthquake events and that automatically recover original configuration. The superelastic SMA materials are unique metallic alloys that can return to undeformed shape without additional heat treatments only after the removal of applied loads. Once the superelastic SMA materials are thus installed at the place where large deformations are likely to intensively occur, the structural system can make the best use of recentering capabilities. Therefore, this study is intended to propose new buckling-restrained braced frames (BRBFs) with superelastic SMA bracing systems. In order to verify the performance of such bracing systems, 6-story braced frame buildings were designed in accordance with the current design specifications and then nonlinear dynamic analyses were performed at 2D frame model by using seismic hazard ground motions. Based on the analysis results, BRBFs with innovative SMA bracing systems are compared to those with conventional steel bracing systems in terms of peak and residual inter-story drifts. Finally, the analysis results show that new SMA bracing systems are very effective to reduce the residual inter-story drifts.