• Proceedings of the Acoustical Society of Korea Conference
• /
• 1993.06a
• /
• pp.155-158
• /
• 1993

• The Journal of the Acoustical Society of Korea
• /
• v.10 no.1
• /
• pp.71-82
• /
• 1991

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1985.10a
• /
• pp.123-128
• /
• 1985

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.6
• /
• pp.494-505
• /
• 1990

This paper reports on the development of a DPSK demodulator of DS spread spectrum communications that use one SAW convolver. The spreading code chip pattern is changed from bit to bit in data portion of packet. And code chip is PSK modulated. Compared with simulation, experiment shows that the DPSK signal spreaded can be demodulated by using only one SAW convolver. And the theoretical performance of this DPSK demudulator is equal to CSK demodulator wich uses two SAW convolvers.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.4
• /
• pp.344-350
• /
• 2009

The goal of this study is to introduce the theoretical background of acoustic nonlinearity in surface wave and to verify its characteristics by experiments. It has been known by theory that the nonlinear parameter of surface wave is proportional to the ratio of $2^{nd}$ harmonic amplitude and the power of primary component in the propagated surface wave, as like as in bulk waves. In this paper, in order to verify this characteristics we constructed a measurement system using contact angle beam transducers and measured the nonlinear parameter of surface wave in an Aluminum 6061 alloy block specimen while changing the distance of wave propagation and the input amplitude. We also considered the effect of frequency-dependent attenuation to the measurement of nonlinear parameter. Results showed good agreement with the theoretical expectation that the nonlinear parameter should be independent on the input amplitude and linearly dependent on the input amplitude and the $2^{nd}$ harmonic amplitude is linearly dependant on the propagation distance.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1996.05a
• /
• pp.159-159
• /
• 1996

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.11 s.353
• /
• pp.8-13
• /
• 2006

Recent RF SAW filters are made using a HTCC package with a CSP(chip scale Package) technology. This paper describes a development of a new $1.4{\times}1.1\;and\;2.0{\times}1.4mm$ RF SAW liters made by PCB substrate instead of HTCC package, and this technology can reduce the cost of materials down to 40%. We have investigated the multi-layered PCB substrate structures and raw materials to find out the optimal flip-bonding condition between the $LiTaO_3$ wafer and PCB substrates. Also the optimal materials and processing conditions of epoxy laminating film were found out through the experiments which can reduce the bending moment caused by the difference of the thermal expansion between the PCB substrate and laminating film. The new PCB SAW filter shows good electrical and reliability performances with respect to the present SAW filters.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.162-162
• /
• 2011

표면파 속도 측정은 근래 토목분야에서는 비파괴 지반조사기법으로 활용되고 있다. 최근에는 디지털 신호처리기술의 발달과 함께, 더욱 정확해진 자료분석 알고리즘을 통하여 표면파 탐사관련 기술이 향상되어 3차원의 공간연속적인 시험이 가능해졌다. 본 연구는 표면파의 분산 특성을 이용하여 콘크리트 구조물의 깊이별 강성평가를 하는 SASW(Spectral Analysis of Surface Waves)기법과 STFT(Short time Fourier Transform)과 HWT(Harmonic Wavelet Transform)를 이용한 주파수영역에서의 공진주파수를 통한 부재평가 기법인 IE(Impact Echo)기법을 이용하여 대상부재의 강도평가를 수행하기 위한 시제품 개발을 수행하였다. 시제품은 메인프레임과 2개의 센서로 이루어져 측정을 수행하며 측정장치와 DAQ장치 및 S/W로 구성되어 있다. 메인프레임의 진동특성영향을 제거하기 위하여 2개의 센서는 프레임과 띄움구조로 설계하였고 센싱하는 위치는 대상 재료의 밀착되어 계측할 수 있도록 설계하였다. 탄성파를 계측하여 대상 재료의 깊이별 측정된 표면파의 속도를 계측하며 개발된 시제품의 구조물별 적용성 평가를 위한 실험을 수행하였고 평균 표면파 속도를 통해 추정한 콘크리트 두께와 결함 및 강도 추정의 적용성을 평가하였다. 시제품을 이용해 시험콘크리트 표면파를 측정한 결과 SASW기법을 이용하여 깊이에 대한 위상속도 분포와 IE기법의 결과로 개발된 시제품의 합리적 적용성이 평가되었다. 그러나 재료의 강도추정에 있어서는 각각 알고리즘의 주파수분석 요소들에 의해 변동되는 경향을 보여 추후 많은 테스트를 통해 속도-강도 추정의 회귀곡선식을 S/W에 탑재시키고 다양한 방법으로 조합하는 알고리즘으로 신뢰성있는 강도추정을 위한 알고리즘을 개발하여야 한다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.10 no.3
• /
• pp.53-60
• /
• 1973

Calculations of the temperature coefficients of the elastic surface wave velocity and delay time were performed for the propagation along the X axis of rotated Y cut plane of the LiNbO3 and LiTaO3. Measurements of the temperature dependence of delay time of the elastic surface wave were also performed for the propagation along the X axis of a 130" rotated Y cut plane of the LiNb03 at the temperature range from liquid He to room temperature. Experimental value 70$\times$10-6/$^{\circ}C$ of the temperature coefficient of the delay time of the elastic surface wave agrees well with the calculated value 72.7$\times$10-a/$^{\circ}C$. The temperature coefficient of delay time of elastic surface wave propagating along the X axis of a 130$^{\circ}$ rotated Y cut plane o( the LiNbO3 is approximately 16$\times$10-6/$^{\circ}C$ at the near temperature of liquid He.d He.

• Journal of KSNVE
• /
• v.8 no.5
• /
• pp.974-980
• /
• 1998

The analysis of dynamic responses are carried out on several orthotropic systems due to transient line source. These include infinite and semi-infinite spaces. The media possess orthotropic or higher symmetry. The lode is in the form of a normal stress acting with parallel to symmetry axis on the plane of symmetry within the materials. The results are first derived for responses of infinite media due to a harmonic line source. Subsequently the results for semi-infinite are derived by using superposition of the solution in the infinite medium together with a scattered solution from the boundaries. The sum of both solutions has to satisfy stress free boundary conditions thereby leading to the complete solutions. Explicit splutions for the displacements due to transient line loads are then obtaind by using Cargniard-DeHoop contour.