• Food Science and Preservation
• /
• v.8 no.3
• /
• pp.286-290
• /
• 2001

Ginger was stored in the 0.05mm and 0.08mm of PE film bags and the styrofoam box. During the ginger storage, weight losses in the PE film bags were effectively supressed than in the control bag, and storage was better in the 0.08mm PE film bag while the spoilage of ginger was higher than in 0.05mm bag. The effective storage temperature was 10$^{\circ}C$ at which was no scouting during the storage. And the perforation in the PE film bag helped the healthy ginger ratio. Single perforation of 6an diameter was good for 0.05mm film and three for 0.08mm film. When CO$_2$absorbent was added into the film bag, the spoilage and mold occurence was lowered. In the styrofoam box, the healthy ginger ratio also increased by incorporating the absorbents, but there were no great differences between activated charcoal and calcium hydroxide.

• Journal of the Korean Electrochemical Society
• /
• v.3 no.3
• /
• pp.136-140
• /
• 2000

A stainless steel separator for a molten carbonate fuel cell is usually coated with aluminum diffusive layer to protect its surface against corrosion by the molten carbonate at high temperatures. In this study, a relatively simple method was devised to form the aluminum diffusive layer on a stainless steel substrate. Slurry coating of aluminum on the substrate followed by heat treatment under reducing atmosphere at $650\~800^{\circ}C$ produced the aluminum diffusive layer of $25\~80{\mu}m$ thickness. The thickness of aluminum diffusive layer increased with increasing the temperature or duration of the heat-treatment. The corrosion resistance against molten carbonate under oxidizing atmosphere was significantly improved by aluminum diffusive layer formed by the sluny painting and heat treatment method. Moreover, the sample prepared in this study showed corrosion behavior similar to the sample with aluminum diffusive layer prepared by ion vapor deposition and heat treatment.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.15 no.3
• /
• pp.93-98
• /
• 2005

The crystal growth of calcite at a low temperature range was carried out by the hydrothermal method using amorphous calcium carbonate which has excellent solubility in water. Amorphous calcium carbonate was prepared by the wet chemical reaction of a stoichiometric mixture of $CaCl_2\;and\;Na_2CO_3$. An important factor was the reaction temperature and time taken in preparation of the amorphous calcium carbonate. From the solubility results calculated by the weight loss method, $NH_4NO_3$ solutions were found to be the most promising solvents to grow calcite single crystals. The hydrothermal conditions for high growth rates of calcite single crystals were as follows: starting material: amorphous calcium carbonate, solvent: 0.01 m $NH_4NO_3$, temperature: $180^{\circ}C$, duration: 30 days. And properties of calcite single crystals were follows: dislocation density: $10^6{\sim}10cm^{-2}$, UV-visible transmittance: about 80% from 190 to 400 nm and birefringence: $0.17{\sim}0.18$. Also, it can be known from the FT-IR results that the absorption peak by injection of $HCO_3^-\;and\;OH^-$ ions was not shown.

• Clean Technology
• /
• v.21 no.1
• /
• pp.53-61
• /
• 2015

In this study, we have investigated the kinetics on the char-CO₂ catalytic gasification reaction. Thermogravimetric analysis (TGA) experiments were carried out for char-CO₂ catalytic gasification of an Indonesian Kideco sub-bituminous. Na₂CO₃ and K₂CO₃ were selected as catalysts which were physically mixed with coal. The char-CO₂ catalytic gasification reaction showed a rapid increase of carbon conversion rate at 850 ℃, 60 vol% CO₂, and 7 wt% Na₂CO₃. At the isothermal conditions ranging from 750 ℃ to 900 ℃, the carbon conversion rates increased as the temperature increased. Four kinetic models for gas-solid reaction including the shrinking core model (SCM), random pore model (RPM), volumetric reaction model (VRM), and modified volumetric reaction model (MVRM) were applied to the experimental data against the measured kinetic data. The gasification kinetics were suitably described by the MVRM for the Kideco sub-bituminous. The activation energies for each char mixed with Na₂CO₃ and K₂CO₃ were found 55-71 kJ/mol and 69-87 kJ/mol.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1996.06b
• /
• pp.3-27
• /
• 1996

분체의 입자 배열이 불규칙한 경우뿐만 아니라 입자 크기가 극미세하여 X선회절분석이 불가능한 경우에도 비정질물질이라 한다. 수용액 속에서 이런 비정질 물질을 합성하기 위해서는 합성용액의 과포화도를 높여 계속 유지시킴에 따라 극미세 1차핵 생성의 지속적인 유도에 따른 입자 성장을 최대한 억제시켜야만 한다. 본 연구에서는 흡습제, 칼슘제 및 식품 첨가제 등으로 이용되는 비정질 탄산칼슘을 계에서 합성하고, 이때 생성된 비정질 상태의 겔을 수용액 환경을 변화시켜가면서 따라 결정화를 유도하고 탄산칼슘의 동질이상을 관찰하였다. CO2의 유속을 11/min, 교반속도를 600rpm으로 고정시키고, Ca(OH)2의 양을 10g에서 50g까지 변화시켜가면서 겔 상태의 비정질 탄산칼슘을 합성하였다. 이때 전기전도도는 CO2의 용해와 더불어 Ca(OH)2의 용해도가 증가함에 따라 변화하였으며, 반응종반부에는 겔화가 시작될 때까지 거의 일정하였다. 따라서, 이러한 사실들로부터 현탁액 내에서의 전기전도도의 변화는 Ca이온의 영향을 받는 것으로 사료된다. 비정질 탄산칼슘은 수용액에서 불안정하여 CO2 가스를 방출하면서 급격히 결정화되는데, 본 연구에서는 Ca(OH)2의 양을 20g으로 하여 위의 방법에 의해 얻어진 겔을 수용액의 종류와 농도 및 결정화 온도, 교반속도를 달리하면서 결정화시켰다. 교반속도를 100rpm으로 하여 물의 온도변화에 다라 결정화시킨 경우 전 온도범위에서 칼사이트상이었으며, 물의 온도가 5$^{\circ}C$일 경우에는 미세한 입자들이 응집된 형태였으나, 그 외의 온도변화조건에서는 모두 평균입경 0.4$\mu\textrm{m}$정도의 비교적 균일하 능면체 형태였다. 또한 교반속도를 500rpm으로 증가시켰을 경우에는 8$0^{\circ}C$에서 침상의 아라코나이트가 소량생성되었음을 SEM사진으로 관찰할 수 있었으며, 소량의 바테라이트도 혼재되어 결정화되었음을 XRD결과로 알 수 있었다. 교반속도를 100rpm으로 한 NH4Cl 0.5mol/l 수용액에서는 입자의 형태와 크기가 불규칙한 칼사이트로 결정화되었으며, MgCl2 0.05mol/l 수용액의 경우에는 순수한 H2O의 경우에서와는 달리 2$0^{\circ}C$에서는 모서리가 무딘 매우 균일한 크기의 칼사이트 입자가 관찰되었으며, 6$0^{\circ}C$부터는 아라고나이트가 생성됨을 관찰할 수 있었다. 따라서, 고온(8$0^{\circ}C$)의 농도 MgCl2 수용액(0.1, 0.2 mol/l)에서 교반속도를 높여(800rpm) 겔을 결정화시킨 결과 아라고나이트의 생성수율이 증가되는 것을 확인할 수 있었다.

• Journal of the Korean Geotechnical Society
• /
• v.31 no.12
• /
• pp.17-27
• /
• 2015

In this study, we tried to precipitate calcium carbonate with carbonate ions decomposed from urea by plant extract and calcium ions dissolved in water. The clay particles carry a net negative charge on their surfaces. Such clay mineral was additionally mixed as a medium to improve soil strength and durability with environmentally-friendly way. The $1^{st}$ solution (plant extracts and urea) and the $2^{nd}$ solution (calcium chloride and clay) were mixed together with clean Nakdong River sand. Then, this mixed soil was compacted into a small cylindrical specimen and then air cured for 7 days in laboratory. The molar concentration of urea and calcium chloride was tested for three different conditions, 1, 5, and 7 mol. Three different clay contents (0, 1, and 3% per total weight) were mixed with sand. For each specimen, a series of unconfined compression test, a durability test, SEM, EDX and XRD analyses were carried out to evaluate its cementation and structure. As the molar concentration of the solution and clay content increased, the unconfined compressive strength and durability increased. The results of SEM, EDX and XRD analyses showed that calcite was precipitated around clay mineral. The thermogravimetry analysis indicated that calcium carbonate precipitated about 1~2% per total weight of the sample.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.3
• /
• pp.203-210
• /
• 2018

Corrosion of the rebar is one of the main factors affecting the durability of reinforced concrete in the world which lead to the failure of the reinforced concrete structures. In this research, a new method of fixing $CO_2$ is practiced to improve the carbonation resistance of the concrete. Brucite($Mg(OH)_2$), a kind of common $CO_2$ fixation materials, was added into ordinary Portland cement paste. Samples containing 0%, 5%, 10%, and 15% $Mg(OH)_2$ were exposed to an accelerated carbonation curing regime with 20% concentration of $CO_2$, 60% relative humidity, and a temperature of $20^{\circ}C$ until tested at 3d, 7d, 14d and 28d. After 28d of $CO_2$ accelerated curing, in the paste containing $Mg(OH)_2$, magnesian calcite was detected by SEM-EDX. Meanwhile, the paste containing $Mg(OH)_2$ exhibit the better pore distribution than ordinary Portland cement paste and the compressive strength of the cement paste containing $Mg(OH)_2$ were more than 50Mpa.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.34 no.2
• /
• pp.198-203
• /
• 1989

Field experiment was conducted to find out the effect of lime materials application on yield, and chemical composition of Burley 21 in 1986. Lime materials and application rate were CaSO$_4$ : Ca 35kg/l0a. CaCO$_3$ : Ca 35kg/l0a and Liming: pH6.5. Contents of Ca and Mg in fresh or cured leaves were increased, but AI, Fe and Mn were decreased by applying lime materials. Yield were increased by applying lime materials. Among lime materials treatment, yield of limed and CaCO$_3$ plot were higher than that of CaSO$_4$ plot. Value per kg of cured leaves was not affected by applying lime materials. Cured leaves of CaSO$_4$ plot contained higher NH$_3$-nitrogen and alkalinity number of water insoluble ash than those of unlimed plot. Cured leaves of CaCO$_3$, plot contained higher alkalinity number of water soluble ash, insoluble ash and volatile neutral constituent, but lower protein-nitrogen and petroleum ether extracts than those of unlimed plot. Cured leaves of limed plot contained higher alkalinity number of water soluble and insoluble ash, NO$_3$-nitrogen and volatile neutral constituents, but lower protein -nitrogen, nicotine and petroleum ether extracts than those unlimed plot. Yield was increased, however leaf Quality in respect to chemical and organoleptic characteristics were not affected considerably by applying lime materials. Therefore, it suggests that controlling the soil pH about 6.5 by liming might be necessary for tobacco cultivation.

• Resources Recycling
• /
• v.5 no.3
• /
• pp.56-64
• /
• 1996

C,H,OH system is widely used for producing synthetic beverages and pharmaceuticals. Calcium hydroxide suspension was used to callhol the morphology of calcium carbonate, and the charactenstics of the formahan and crystsllizatian of calcium cilrbonate by adding ethylenc glycol were determined A reaclor was made with attaching a ceramic bubble plate, and lhe eleclrical conductivity was continously monitored during the rcaction with CO, gas. A part of the suspension was separated and powdered at the transition point. XRD and electron microscopic observation showed that the intermedmte and final products were vilterite, ;~r;lganite and calcite. In this study, the volumc of the ethylene glycol added to CH,OH was fixed a1 10 vol\ulcornerh. The valumc of the suspension was 500 ml, and the changes oi characteristics were shdied along with variims cnntents(l0-50 g) of calcium hydroxide. Except m the case of 10 g of calcium hydroxide at the crystallization stagc, all of products showed gelation. Tne marc the calcium hydroxide the shorter the formation time. Alsa. the farmalion of spherical valcrile ivas obsemcd when 30 g Ca(OH), was added. Tne vaterite(a compound material) can bc synthesised under alnbienl pressure and lempcmhre m a C,H,OH system by morphology control. Even though the vateritc was meta-stable phasc and could bc changed to calcitc easily, the stable and spherical vateritc was observed by using G5 glass fillers and vacuum dricrs.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.5
• /
• pp.45-55
• /
• 2015

Currently, extreme weather events such as super typhoon, extreme snowfall, and heat wave are frequently occurring all over the world by natural and human caused factors. After industrial growth in the 1970s, earth's temperature has risen sharply. due to greenhouse effect. Global warming can be attributed to gases emitted from using fossil fuel such as average carbon dioxide, perfluorocarbons, nitrous oxide, and methane. Especially, carbon dioxide has the highest composition of about 90%. in the fossile fuel usage emitted gas. Concrete has excellent durability as a building material climate change. However, due to various of physical and chemical environmental effect such as conditions during its curing process, the performance degradation may occur. Carbon dioxide in the atmosphere causes steel corrosion and durability decreases by lowering the alkalinity of concrete. Therefore, in this study, concrete durability performance with respect to carbonation from curing conditions change due to wind speed and sunshine exposure time. Concrete carbonation experiment are performed. using wind speed (0, 2, 4, 6) m/s and sunlight exposure time (2, 4, 6, 8) hrs. Also, performance based evaluation through the satisfaction curve based on the carbonation depth and carbonation rate test results are performed.