• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.481-486
• /
• 2008

Standard Estimating System, which can be used for estimating a construction cost, has been pointed out having some problems such as non-reflecting a variety of construction environments and site conditions, non-adapting new technologies and methods since it was established in 1970. For solving these problems, the Korean Institute of Construction Technology(KICT) has chosen organizations for amending Standard Estimating System. However they have had many mistakes in the process of amending works because of non-establishing amending process and absence of the depreciation measurement method. This research derived the necessity to improve the amending process of the Standard Estimating System, and presented the detailed amending process and the performing method in the each process. Furthermore, this research proposed the depreciation measurement method available for the construction industry by means of analyzing researches that performed in the manufacturing industry and the measurement method for depreciation of general accounts.

• Proceedings of the Korean Quaternary Association Conference
• /
• 2004.11a
• /
• pp.4-13
• /
• 2004

제주도 북제주군 한림읍 협재리에는 대부분 탄산염퇴적물로 이루어진 해안사구가 분포하고 있다. 사구를 이루는 탄산염퇴적물은 연체동물과 홍조류의 조각이 약 80% 이상을 차지하며 그 외에 저서성 유공충, 성게류와 태선동물의 조각, 그리고 화산암편으로 이루어져 있어, 제주도에 분포하는 여러 탄산염 해빈퇴적물의 입자조성과 매우 유사한 경향을 나타낸다. 이러한 탄산염 입자들은 천해에 서식하던 해양생물들에 의해 생성되며, 그 각질이 해빈으로 운반되고 바람에 의해 재동되어 사구를 형성하였다. 특히 이 연구지역의 사구가 분포하는 지점에서 북쪽으로 약 1km 떨어져 있는 협재 해수욕장에는 현재에도 천해에서 생성된 많은 양의 탄산염 해빈퇴적물이 퇴적되어 있으며, 제주도의 타 지역에 비해 매우 빠른 북동${\sim}$북서방향의 바람이 불고 있어, 퇴적물을 해빈에서부터 사구형성지점으로 운반시키는 데 효과적인 역할을 했을 것으로 판단된다. 사구를 절개하여 그 단면을 관찰한 결과, 전반적으로 희미한 수평층리와 사층리가 발달하고 있으며, 그 외의 다른 뚜렷한 퇴적구조는 관찰되지 않는다. 퇴적물의 입자들은 주로 직경이 $0.27{\sim}0.40mm$로 중립질 모래에 해당한다. 이 크기의 입자들은 가장 침식이 잘 될 수 있는 입자크기에 해당하는 것으로 알려져 있으며, 따라서 해빈으로부터 퇴적물이 운반될 때에 특히 이 크기의 입자들이 차별적으로 더 많이 운반되었을 것이라고 생각된다. 또한 퇴적물 입자의 크기와 구성성분의 함량은 각 사구의 전 층준에서 크게 변화하지 않는 것으로 나타나며, 이는 사구가 형성되는 기간 동안 탄산염퇴적물을 운반한 바람의 세기가 어느 정도 일정하였음을 지시한다. 해안사구의 형성시기를 알아보기 위하여 사구의 기반을 이루는 고토양층과 사구 최하부와 최상부의 탄산염퇴적물에 대해 방사성탄소연대측정을 실시하였다. 그 결과, 사구의 형성시기를 지시하는 고토양의 연령은 $680{\sim}720\;BP\;(1,200{\sim}1,300\;AD)$로 측정되었으며, 사구를 이루는 탄산염퇴적물의 연령은 전 층준에서 모두 약 3,500 BP로 측정되었다. 따라서 약 3,500 BP에 천해에서 생성된 탄산염퇴적물이 해빈에 분포하다가 $1,200{\sim}1,300\;AD$에 바람에 의해 재동되고 현재의 위치에 쌓여 사구를 형성한 것이라고 해석할 수 있다. 사구가 형성되기 시작하던 시기는 전세계적으로 춥고 바람이 세었던 Little Ice Age ($1,300{\sim}1,820\;AD$)에 해당하며, 따라서 해빈에 분포하던 많은 양의 탄산염퇴적물이 이 시기에 집중적으로 운반된 것으로 사료된다.

• The Journal of the Korea Contents Association
• /
• v.16 no.12
• /
• pp.383-398
• /
• 2016

The objective of this research is to depict examples of how a company could derive the skillset areas with the highest priority when analyzing the skill set requirements of human resources, based on the skillset requirements that are unique to each work site. For this purpose, a survey was conducted for each of the job categories for new employee in A company. The analysis results showed that in 32 out of the 34 areas, the gaps between the current levels and the expected levels were statistically significant. For employees of company A, the following 7 areas were determined to be the key job competencies with the highest priority: document creation skills, diagram creation skills, thinking skills, problem solving skills, time management skills, technology comprehension ability, and task comprehension skills. The required job competencies with the highest priority were found to be different for each job category. As a result of this research, the priority rankings of skillset requirements for each job category in company A could be determined, along with the implications for HRD/HRM and other companies.

• Korean Journal of Food Science and Technology
• /
• v.27 no.4
• /
• pp.471-477
• /
• 1995

Extractive nitrogen, free amino acids, oligopeptides, nucleotides and related compounds, quaternary ammonium bases, and guanidino compounds were analyzed to evaluate quality of anchovy sauce. The commercial products contained low proximate composition, extractive nitrogen and other extractive components, than the experimentally prepared anchovy sauce. Both samples, commercial products and experimentally prepared anchovy sauce, were rich in free amino acids, such as glutamic acid, leucine, alanine, lysine, and aspartic acid. The extractive nitrogenous components which consist of total nucleotides and related compounds, total free amino acids, methionine, isoleucine, valine, taurine, tyrosine, histidine, leucine, aspartic acid, cystine, and lysine, showed significant correlation(p<0.01) with extractive nitrogen. Possibly, seven kinds of free amino acids such as methionine, isoleucine, valine, taurine, tyrosine, histidine, and leucine, might be recommend as quality indices of standardization for anchovy sauce.

• Journal of Korean Society of Forest Science
• /
• v.104 no.4
• /
• pp.640-648
• /
• 2015

National forests have been assumed to do a leading role in carbon sequestration and creating forest resources since society demanded it due to climate change. Therefore, it is needed to check whether a national forest management plan and its evaluation are implemented effectively. As an effective planning and management is to be ensured on the basis of proper evaluation system, this research suggests to improve the evaluation system by analyzing it theoretically. Improvements for national forest management plan and its evaluation are as follows: (1) adjusting evaluation goal and time; (2) giving weighting to each work when planning; (3) writing details of change in planning and its grounds; (4) using the national forest management information systems to integrate these evaluation methods and result. Since to predict future changes in forests and achieve sustainable forest management begins at the reliable evaluation for overall process of the implemented project, the significance of this study is in proposing the improvement of evaluation system for national forest.

• Journal of the Korea Society for Simulation
• /
• v.24 no.1
• /
• pp.35-43
• /
• 2015

This research proposed a new method to evaluate the objective validity to launch smart transportation services that various stakeholders are complicatedly inter-connected. First of all, we have designed the fundamental business model to form the smart transportation services and defined the stakeholders taking part in the services. Also, the criteria to evaluate the economical validity has been proposed based on the relationship among stakeholders. Especially, in the case EV drivers and charging service providers, the economical validity depends on the scale of spreading. Therefore, we have compared the two extreme scenarios, the poor and stable level of EV spreading. According to the result, it may be said that EV drivers and charging service providers cannot be guaranteed the economical validity due to the burden of initial investment. On the contrary to this, suppliers of EV and charging gears may secure more than a certain level of profit. In addition, the government may have great profit due to reducing the CO2 emission and cost for importing energy sources. Therefore, it is needed to enhance the level of supporting EV drivers and charging service providers at the first stage. Also, the impact of the ratio of EV and charging service stations on the economical validity of smart transportation should be further investigated.

• Journal of Convergence for Information Technology
• /
• v.10 no.11
• /
• pp.340-350
• /
• 2020

This study was conducted to present comprehensive professionalism measurement tools suitable for hospital administration staffs. The study used measurement tools related to the psychological and behavioral characteristics of individuals used in prior studies for administration staffs at general hospitals and hospitals. Factor analysis and reliability analysis were conducted to verify the validity and internal relevance. As a result of the analysis, it was concluded that composed of 5 factors, and that the total reliability was 94.4%, which was very reasonable as a comprehensive professionalism measurement tool. Therefore, each component was defined as Confidence of Job performance, Salary Adequacy, Pride in Duties, Ability to achieve work goals, and Work Autonomy in order to provide a clear meaning. Professionalism from a modern perspective is a broader concept than traditional professionalism, including the subjective perceptions of job values and individuals' their abilities. Therefore, comprehensive professionalism measurement tools presented in this study will be very suitable and useful for hospital administration staffs.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.42 no.1
• /
• pp.39-45
• /
• 2005

As a basic research for the development of a non-invasive blood glucose sensor using millimeter waves, we have presented a method for measuring the dielectric properties of high loss dielectrics, based on the reflection method, and investigated the variation of the dielectric properties of glucose-water and glucose -0.9% NaCl solutions in the 10～90 GHz range. In the proposed method, a minimal reflection condition is formed by placing a specially-chosen low-loss plane-parallel plate in front of a high-loss medium under test at a given frequency range. Using the minimal power reflection coefficient and the corresponding frequency at this condition, tile dielectric properties of the medium can be determined. The measured results on pure water have shown the adequacy of the proposed method. The measured results on glucose-water and glucose -0.9% NaCl solutions in the 10～90 GHz range showed that the variations of the dielectric properties of glucose solutions according to the change of their glucose concentration were maximum in the 30～45 GHz range. From these facts we concluded that the variation of about 3 mole/L in the glucose solutions must be distinguished With the measurement accuracies of ±0.1 dB and ±0.01 GHz.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.16 no.5
• /
• pp.1-11
• /
• 2012

In this paper, non-linear analysis was performed for Reinforced Concrete (RC) walls using different macroscopic models subjected to cyclic loading, and the analytical results were compared with previous experimental studies of RC walls. ASCE41-06 (American Society of Civil Engineers) specifies that the hysteresis behaviors of RC walls are different due to the aspect ratio of the walls. For a comparison between analytical and experimental results, a slender wall with an aspect ratio exceeding 3.0 and a squat wall with an aspect ratio of 1.0 were selected among previous research works. For the non-linear analysis, each test specimen was modeled using two different macroscopic methods: the first representing the flexural behavior of the RC wall, and the second considering the diagonal shear in the web of the wall. Through nonlinear analysis of the considered RC walls, the analytical difference of a slender wall was negligible due to the different macroscopic modeling methods. However, the squat wall was significantly affected by the considered components of the modeling method. For an accurate performance evaluation of the RC building with squat walls, it would be reasonable to use a macroscopic model considering diagonal shear.

• The korean journal of orthodontics
• /
• v.32 no.1 s.90
• /
• pp.43-49
• /
• 2002

When we deal with maxillary and mandibular anterior dental arches showing problems in occlusal relation and aesthetics caused by malformations of teeth and congenital missing, et al during the orthodontic treatment, we could not often decide the functional occlusion by only relying on the orthodontic treatment. If orthodontists can predict what kinds of treatments are needed for functional occlusion in maxillary and mandibular anterior dental arches, they can not only effectively treat patients but also facilitate the cooperation with other field during the treatment, Our previous research showed the correlation among intercanine width, segment depth and arch perimeter by using the Korean normal occlusion model. At this time, we produced the computer application program by taking advantage of this correlation. And then, we applied this program to setting up the treatment plans for 2 patients with the damaged maxillary and mandibular dentures. With the help of this program, we could not only easily acquire the information about the change of variables required by treatment plans but also intercanine width, segment depth and arch perimeter. Later, if we can the information about the relationship between the change of the angle of incisors depending on facial types and arch forms and, in addition, can acquire the appropriate intercanine width, we can have the ability to produce the 3 dimensional occlusogram for the anterior dental arch forms.