• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.2
• /
• pp.123-134
• /
• 2012

A typical cooling system of an engine relies on a water pump that circulates the coolant through the system. The pump is typically driven by the crankshaft through a mechanical link with engine starting. In order to reduce the friction and warm-up time of an engine, the clutch-type water pump (CWP) was applied in 2.0 liter diesel vehicle. The clutch-type water pump can force cooling water to supply into an engine by the operation of an electromagnetic clutch equipped as the inner part of pump system. The onset of CWP is decided by temperature of cooling water and engine oil. And, the control logic for an optimal operation of the clutch-type water pump was developed and applied in engine and vehicle tests. In this study, the warm-up time was measured with the conventional water pump and clutch-type water pump in engine tests. And the emission and the fuel consumption were evaluated under NEDC mode in vehicle tests. Also, tests were carried out for the various temperature conditions starting the operation of CWP. From the results of the study, the application of CWP can improve the fuel consumption and $CO_2$ reduction by about 3%.

• Journal of Broadcast Engineering
• /
• v.7 no.1
• /
• pp.2-9
• /
• 2002

Recently. VR( Virtual Reality) applications such as virtual studio and virtual character are wifely used In TV programs. and AR( Augmented Reality) applications are also belong taken an interest increasingly. This paper introduces a virtual screen system. which Is a new AR application for broadcasting. The virtual screen system is a real-time video augmentation system by tracking a chroma-patterned moving panel. We haute recently developed a virtual screen system.'K-vision'. Our system enables the user to hold and morse a simple panel on which live video, pictures of 3D graphics images can appear. All the Images seen on the panel change In the correct perspective, according to movements of the camera and the user holding the panel, in real-time. For the purpose of tracking janet. we use some computer vision techniques such as blob analysis and feature tracking. K-vision can work well with any type of camera. requiring no special add-ons. And no need for sensor attachments to the panel. no calibration procedures required. We are using K-vision in some TV programs such as election. documentary and entertainment.

• Korean journal of applied entomology
• /
• v.38 no.2
• /
• pp.129-138
• /
• 1999

This study was carried out with two types of silkworm, Bombyx mori, adults having different life span: long life span (adult living for more than fifteen days; LLS), and short life span (adult living less for than five days; SLS). The fine structures of fat body cells in the young and the senescent males and females were compared in an attempt to elucidate the aging physiology of the silkworm adult. In SLS, there were many rough endoplasmic reticula (RER) and glycogen granules in the female cytoplasm, whereas the smooth endoplasmic reticula (SER) were observed in the male cytoplasm. Also in SLS, the mitochondria were swollen and had many poor osmiophillic inclusions (fatty degeneration) at three days after emergence. In LLS, compared to SLS, comparatively normal mitochondria and nuclear membrane were observed in even five day old female. In fifteen day old LLS female, however most of cell membranes were disappeared and mitochondria were abnormally expanded. Many fat granules were observed in the cytoplasm of ten day old male (LLS) which died with full autophagic vacuole (AV) collapsed at fifteen days. Therefore, it is suggested that SLS type is recommended for the study of aging tissue, because it is easier to monitor the changes in tissue structure.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.335-335
• /
• 2011

곰팡이에 의한 감염과 바이오 필름 형성이 우리 인간에게 매우 유해하다는 것은 익히 알려진 바이다. 일례로, 이는 우리가 먹는 음식을 오염시키고 치아를 상하게 하며 수도관을 부식시키고 또 우리 몸속에 집어넣는 의료기기에서 자라 심각한 질병을 유발시키는 등 여러가지 문제를 일으킨다. 곰팡이 감염과 바이오 필름 형성을 막기 위해 항생제 및 화학물질 등을 이용하는 방법들이 있으나 저항성이 증가된 균주의 출현, 환경오염 등의 문제점을 유발시키고 있다. 따라서 좀더 지속적이고 환경친화적인 기술개발이 요구되어지고 있다. 강한 살균력이 있다고 알려져 있는 대기압 플라즈마는 이러한 기술개발에 적용해볼 필요가 있다. 본 연구에서는 상온 대기압 플라즈마를 만들어 내는 여러 타입의 장치를 이용하여 곰팡이 살균과 이스트 바이오필름 형성 저해에 대한 조사를 하였고 플라즈마 처리에 따른 곰팡이 세포들의 세포학적 분자생물학적 영향에 대해 조사해 보았다. 대기압 상온 플라즈마 제트는 대기중에서 방안의 온도로 플라즈마가 생성되며 이를 페트리디쉬위에 접종된 이스트(Saccharomyces cerevisiae) 위 10 mm에서 조사한 결과 2분 이상의 처리를 했을 때 바이오 필름형성을 하지 못함을 보였고 곰팡이(Neurospora crassa)포자에 처리했을 때는 처리시간에 비례하여 발아하는 포자수가 감소하고 포자의 모양도 수축되는 것으로 관찰되었다. 대기압 플라즈마 제트는 대면적이 아닌 국부적 살균으로 살균력은 보이나 그 효율성이 낮아 이를 보완하기위해 DBD 형식의 플라즈마 장치를 만들었으며 이는 페트리디쉬의 모든 면을 동시에 조사할 수 있는 장점이 있다. 다만 제트와는 달리 플라즈마의 생성구간이 넓고 얇아 시료와 2~3 mm 간격을 띄우고 조사하였다. 제트와 마찬가지로 살균의 효과를 보였으며 기존의 단점을 극복하여 동시에 더 많은 면적을 조사 할 수 있게 되었다. 이를 통해 플라즈마의 살균능력을 직접 확인하였고 앞으로 더 많은 실험과 연구를 통해 일련의 과정들에 대한 원인을 규명하고자 한다.

• Korean Journal of Agricultural Science
• /
• v.25 no.2
• /
• pp.247-259
• /
• 1998

Analyses which loads were regarded as instant load and gradual step load were performed with data measured on gradually loaded field, and the results were inspected to find effect of load condition, and final settlements predicted by Hyperbolic, Tan's, Asaoka's, and Monden's method were compared with each other. According to above analyses, the following conclusions were obtained. Settlement curves which loads were regarded as instant load and gradual step load were beginning to coincide at time of twice duration of embankment. On the ground installed vertical drain, the result of Hyperbolic, Tan's, Asaoka's, Monden's, curve fitting I, and curve fitting II (simple, Carrillo) methods make conclude that Asaoka, curve fitting I, and curve fitting II methods agree with measured settlement.

• Journal of Korean Society of Water and Wastewater
• /
• v.21 no.1
• /
• pp.47-55
• /
• 2007

The waste water treatment facility at rural and mountainous region in catchment areas of dams should be small scale. The wastewater treatment facility of small scale has some specification as follows;1)simple process, 2)low maintenance cost, and 3)high removal efficiency. So, we developed the bioreactor which can be satisfied with the specification of small scale waste water treatment facility. The bioreactor consisted of the anoxic and oxic zone. The two zones were effectively separated by cone type baffle. By the effective separation through CTB, the nitrification and denitrification reaction occurred effectively. Therefore, the removal efficiency of total nitorgen (TN) increased compared to other types of baffle. And, we put into the bio activated media in oxic zone to increase the concentration and activity of microbiology. The media contained the components which were made of many kinds of the minerals to increase the activity of microbiology. Additionally, we observed that the phosphate removal efficiency increased by bio activated media. This is resulted from the coagulation-sedimentation reaction by mineral in components. The average removal efficiencies of TN and TP during Run 2 were 69 and 89% which were 4 and 25% higher than those during Run 1 without the MA, respectively. For BOD, COD, SS and TKN, the average removal efficiencies at Run 2 were slightly higher than those at Run 1. Therefore, we could maintain the high concentration and high activity of microbiology through bioreactor developed in this study. And the removal efficiency of TN and TP increased.

• Smart Media Journal
• /
• v.3 no.1
• /
• pp.9-15
• /
• 2014

In these days, along with the extreme popularity of online social network services, it becomes an important problem understanding the role of social network in the research of message dissemination. Past studies of message dissemination over online social network services mostly consider the coverage of message dissemination and the methods to maximize it. But, these works lack of the consideration of the impact of multi channel social network, which has multiple communication channel with distinct properties of message transfer and various users with distinct channel preferences. In this paper, the new message dissemination model over multi-modal multi-channel social network, the Delay Weighted Independent Cascade Model, is proposed. The proposed model considers various channels including online social network service, email, SMS messaging, phone and mouth-to-mouth and their distinct message transfer properties. In order to consider the various user properties, the different value of probability of forwarding a message and the different preference of communication channel is considered. Moreover, the proposed model considers the distribution of user location and allows to analyze the properties of message dissemination under various scenarios. Based on the proposed model, a message dissemination simulator is generated and the message disseminations on various scenarios are analyzed.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.39 no.3
• /
• pp.228-238
• /
• 2002

This paper presents a digital controller of the electronic ballast using high frequency modulation method for the metal halide lamp. The proposed controller includes the control algorithm for soft starting, no load protection, over current protection and power control. The proposed digital controller, moreover, has the high frequency modulation scheme and the tracking algorithm to avoid acoustic resonance phenomena. For the math production with the low cost using the ASICs (Application Specific Integrated Circuit), the proposed digital controller has been designed with the FPGAs(Field Programmable Gate array) only, without any microprocessor. In this paper, the detail digital control algorithms are described and the experimental results of prototype 150w metal halide electronic ballast are presented.

• The Journal of Society for e-Business Studies
• /
• v.16 no.4
• /
• pp.301-319
• /
• 2011

Blog plays an important role as new type of knowledge base distinguishing from traditional web resource. While information resources in their existing website dealt with a wide range of topics, information resources of the blog are concentrated in specific units of information depending on the user's interests and have the criteria of classification forresources published by tagging. In this research, we build a tag hierarchy utilizing title keywords and tags of the blog, and propose apost clustering methodology applying the tag hierarchy. We then generate the tag hierarchy reflected the relationship between tags and develop the tag clustering methodology according to tag similarity. In this paper, we analyze the possibility of applying the proposed methodology with real-world examples and evaluate its performances through developed prototype system.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.3
• /
• pp.99-111
• /
• 1999

The frictional capacity of auger-cast piles is often very small because of the disturbance of the soil surrounding the pile during the excavation process. Usage of expansive agents and a pressurized injection technique for auger-cast piles should improve the frictional resistance between pile and soil. This paper presents the test results of auger-cast model piles installed with expansive mortar in laboratory compacted weathered soil. The model piles were installed in a calibration chamber with a variation in the amount of expansive agent, the injection process and the chamber pressure. It was observed that the pile shaft resistance increases with the increased amount of expansive agent, and also increases when mortar is pressure injected. The shaft resistance increased up to 24% for the pile installed only with expansive mortar and increased up to 56% for the pile installed with the pressurized injection of expansive mortar, compared with that of piles with plain mortar.