• 제목/요약/키워드: 타이타늄 임플랜트

검색결과 5건 처리시간 0.026초

타이타늄 임플랜트의 양극산화 표면처리에 따른 세포부착 특성에 관한 연구 (MG63 Cell Attachments on the Titanium Disks after Micro-Arc Oxidation)

  • 최정원;허성주;장익태;곽재영;이재봉;임순호
    • 구강회복응용과학지
    • /
    • 제20권1호
    • /
    • pp.51-56
    • /
    • 2004
  • 이번 연구의 목적은 순수 타이타늄의 표면을 양극산화법으로 표면처리하여 표면의 특성변화를 연구하고, 이에 따른 세포부착 특성의 차이를 연구하는 것이다. 원반 모양의 타이타늄을 전해질용액에서 300V - 550V의 전압을 주어 양극산화 하고 표면특성을 관찰한 결과, 전압이 높아짐에 따라 표면의 분화구 크기가 커지는 양상을 보였으며 아울러 표면 거칠기도 증가되었다. 세포 부착 실험결과 전압이 증가함에 따라 세포부착 및 증식세포수는 감소하였다. 300V 이상의 양극산화 전압은 표면의 거칠기는 증가시키지만 세포증식은 오히려 억제되는 것이 관찰되었다.

일체형 지대주의 Diamond Like Carbon 표면 처리와 나사 조임 시기가 풀림 현상에 미치는 영향 (THE INFLUENCE OF ABUTMENT SCREW TIGHTENING TIMING AND DLC COATING OF CONICAL CONNECTION IMPLANT SYSTEM)

  • 김기홍;곽재영;허성주
    • 대한치과보철학회지
    • /
    • 제46권2호
    • /
    • pp.209-216
    • /
    • 2008
  • 본 연구의 목적은 내측연결형 임플랜트와 일체형 지대주를 사용하여 최종 보철물을 시적한 뒤에 5만 번의 반복하중 후에 다시 체결하고 20만 번의 반복하중을 가한 후의 지대주 풀림토크와 20만 번의 반복하중을 받은 지대주 풀림토크가 어떻게 달라지는지를 비교하고자 하는 것이다. 실험 재료로는 타이타늄 지대주와 DLC 코팅된 지대주를 사용하였다. 실험군은 4군으로 모두 8개의 ITI SLA $4.1{\times}10mm$ 를 사용하였다. A군과 B군은 5만번, 20만번 반복하중을 가하고 Periotest값과 풀림 토크값을 측정하였으며 C군과 D군은 20만번 반복하중을 가하고 Periotest 값과 풀림토크값을 측정하였다. 풀림 토크값의 측정은 디지털 토크 게이지를 사용하였고, 반복하중은 MTS. (Bionix 850 II, MTS, U.S.A.)를 사용하였으며 100N/cm의 힘을 20도의 경사, 14Hz 의 조건으로 가하였다. A군과 C군은 코팅하지 않은 타이타늄 지대주를 사용하였으며, B군과 D군은 DLC 코팅한 지대주를 사용하였다. 1. 5만번 반복하중을 가한 뒤 측정한 풀림 토크는 B군에서 약간 더 큰 평균값을 보였다. 하지만 통계학적으로 두 군간에 유의한 차이를 보이지 않았다 (P>0.05). 2. 20만번 반복하중을 가한 뒤 측정한 최종 풀림 토크 값은 A군은 C군보다, B군은 D군보다 약간 더 큰 평균값을 보였으나 통계학적으로 두 군간에 유의한 차이를 보이지 않았다 (P>0.05). 3. 20만번 반복하중을 가한 최종 풀림 토크 값은 A, B군과 C, D군 사이에 통계학적으로 유의할 만한 차이가 없었다 (P>0.05).

타이타늄 임플랜트 시편 내부에 설치한 자석의 자성강도에 따른 골형성 변화 (THE CHANGE OF BONE FORMATION ACCORDING TO MAGNETIC INTENSITY OF MAGNET PLACID INTO TITANIUM IMPLANT SPECIMENS)

  • 황윤태;이성복;최대균;최부병
    • 대한치과보철학회지
    • /
    • 제43권2호
    • /
    • pp.232-247
    • /
    • 2005
  • Purpose. The purposes of this investigation were to discover the possibility of clinical application in the areas of dental implants and bone grafts by investigating the bone formation histologically around specimen which was depending on the intensity of magnetic field of neodymium magnet inside of the specimens. Material and method. 1. Measurement of magnetic intensity - placed the magnet inside of the specimen, and measured the intensity of magnetic field around the 1st thread and 3rd thread of specimen 20 times by using a Gaussmeter(Kanetec Co., Japan). 2. Surgical Procedure - Male rabbit was anesthetised by constant amount of Ketamine (0.25ml/kg) and Rompun (0.25ml/kg). After incising the flat part of tibia, and planted the specimens of titanium implant, control group was stitched without magnet, while experimental groups were placed a magnedisc 500(Aichi Steel Co., Japan) or magnedisc 800(Aichi Steel Co., Japan) into it, fixed by pattern resin and stitched. 3. Management after the surgery - In order to prevent it from the infection of bacteria and for antiinflammation, Gentamycin and Ketopro were injected during 1 week from operation day, and dressed with potadine. 4. Preparation of histomorphometric analysis - At 2, 4 and 8 weeks after the surgery, the animals were sacrificed by excessed Ketamine, and then, specimens were obtained including the operated part and some parts of tibia, and fixed it to 10% of PBS buffer solution. After embedding specimens in Technovit 1200 and B.P solution, made a H-E stain. Samples width was 75$\mu$m . In histological findings through the optical microscope and using Kappa image base program(Olympus Co. Japan), the bone contact ratio and bone area ratio of each parts of specimens were measured and analyzed. 5. Statistical analysis - Statistical analysis was accomplished with Mann Whitney U-test. Results and conclusion. 1. In histomorphometric findings, increased new bone formation was shown in both control & experimental groups through the experiment performed for 2, 4 & 8 weeks. After 4 weeks, more osteoblasts and osteoclasts with significant bone remodeling were shown in experimental groups. 2. In histomorphometric analysis, the bone contact ratios were 38.5% for experimental group 1, 29.5% for experimental group 2 and 11.9% for control group. Experimental groups were higher than control group(p<0.05) (Fig. 6, Table IV). The bone area ratios were 60.9% for experimental group 2, 46.4% for experimental group 1 and 36.0% for control group. There was no significantly statistical difference between experimental groups and control group(p<0.05) (Fig. 8, Table VII) 3. In comparision of the bone contact ratios at each measurement sites according to magnetic intensity, experimental group 2(5.6mT) was higher than control group at the 1st thread (p<0.05) and experimental group 1 (1.8mT) was higher than control group at the 3rd thread(p<0.05) (Fig. 7, Table V, VI). 4. In comparision of the bone area ratios at each measurement sites according to magnetic intensity, experimental group 2(5.6mT) was higher than control group and experimental group 1 (4.0mT) at the 1st thread(p<0.1) and experimental group 2(4.4mT) was higher than experimental group 1 (1.8mT) at the 3rd thread(p<0.1) (Fig. 9, Table IX, X). Experiment group 2 was largest, followed by experiment group l and control group at the 3rd thread of implant. There was a significant difference at the 1st thread of control group & experiment group 2, and at 1st thread & 3rd thread of experiment group 1 & 2, and not at control group experiment group 1.(p<0.1)