• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.268-268
• /
• 2004

머플러는 소음의 저감과 공기 정화의 특성으로 인해 자동차와 중장비에 적용되고 있다 최근에는 강화되고 있는 엄격한 환경규제를 만족하기 위해 그 설계와 제조에 있어 그 중요성이 높아지고 있으며, 머플러 튜브의 형태와 타공의 개수 및 배열은 다양한 형태로 연구가 이루어지고 있다. 이 중에서 튜브의 타공은 차량의 중량과 기능에 따라 다양한 형태를 가지며, 모델수의 증가와 출시기간의 단축으로 인해 튜브의 타공기술은 머플러 시장의 경쟁력을 좌우할 정도로 중요해 지고 있다.(중략)

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.6
• /
• pp.714-722
• /
• 2014

In the previous study, a variety of wood-based panels was thermally decomposed to manufacture carbonized boards that had been proved to be high abilities of insect and fungi repellence, corrosion and fire resistant, electronic shielding, and formaldehyde adsorption as well as sound absorption performance. Based on the previous study, carbonized medium density fiberboard (c-MDF) was chosen to improve sound absorption performance by holing and sanding process. Three different types of holes (cross shape, square shape, and line) with three different sanding thickness (1, 2, and 3 mm) were applied on c-MDF and then determined sound absorption coefficient (SAC). The control c-MDF without holes had 14% of SAC, however, those c-MDFs with holes had 16.01% (square shape), 15.68% (cross shape), and 14.25% (line) of SAC. Therefore, making holes on the c-MDF did not significantly affect on the SAC. As the degree of sanding increased, the SAC of c-MDF increased approximately 65% on sanding treated c-MDFs (21.5, 21.83, and 19.37%, respectively) compared to the control c-MDF (13%). Based on these results, composite sound absorbing panel was developed with c-MDF and MDF (11 mm). The noise reduction coefficient of composite sound absorbing panel was 0.45 which was high enough to certify as sound absorbing material.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.85-86
• /
• 2023

This study confirmed the improvement of the Composite Waterproof Method in which the sheet layer is partially attached with perforated film and the joint is FRP-treated.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.1
• /
• pp.62-66
• /
• 2011

In this study, the thermal performance of disk can be compared with disk and disk with holes through numerical analysis. The capacity of thermal emission on general disk becomes more than on disk with holes at the distribution of temperature at first and the magnitude of equivalent stress on general disk becomes less than on disk with holes at the distribution of stress. The capacity of thermal emission or the magnitude of thermal deformation on disk with holes becomes less than that on general disk 30 minutes later. The disk with holes is worn less and more durable than general disk. The performance of cooling and braking force at disk and pad can be improved by installing the disk with holes.

• 유공압시스템학회:학술대회논문집
• /
• 2010.06a
• /
• pp.66-69
• /
• 2010

A punched pipe in a muffler for an automobile has many important variables, like location of holes in the pipe and length of the pipe related to noise reduction of a diffuser. This pipe is cut depending on length of product and this process, generally workers cut pipes by hands. In this process, there are many errors and it relies on the skill of workers, so it can happen that cycle time for complete product gets long and productivity gets low. Therefore, we need a vision system to distinguish holes in the punched pipe and a transfer system to set the cutting position automatically by moving the pipe depending on forward and backward part of the holes. This paper explains the development of an automatic transfer device which will cause the beating pipe to be cut correctly, exactly the same length as the product.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.49-50
• /
• 2023

The purpose of this study was to review ways to increase mechanical performance and apply to actual structures by reinforcing AL perforated sheets, which are industrial by-products generated after capacitor production, with mortar to reinforce the stress of structural members. The AL perforated sheet was reinforced so that it behaves integrally at the position receiving compression, tension, and bending stress. It was confirmed that the stress received by the AL perforated sheet increased according to the number of reinforcements, and as a result, the mechanical properties were improved.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2012.06a
• /
• pp.246-246
• /
• 2012

• Food Science and Preservation
• /
• v.14 no.1
• /
• pp.18-23
• /
• 2007

This study investigated the effectsof whiteness and packing conditions on the quality characteristics of milled rice during storage at $25^{\circ}C$. Three kinds of packing materials (kraft paper sealed polyethylene and perforated polyethylene) were used to pack milled rice of different whiteness grades (36, 38, 40 and 42). The moisture content and weight of milled rice packed in kraft paper dropped very rapidly compared to values from milled rice packed in polyethylene because of high gas exchange through the paper. On the other hand, the increase in fat acidity of milled rice packed in kraft paper was less than that of milled rice packed in polyethylene because the moisture content of paper-packed rice fell rapidly. The overall quality of cooked rice rose with whiteness, and dropped with extended storage. The overall eating quality of milled rice paced in perforated polyethylene was bestwhen rice was prepared for the table after 8 weeks of storage.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.6
• /
• pp.126-131
• /
• 2017

Numerical analysis using commercial CFD code was carried out to develop the drag force type vertical axis hydraulic turbine for the improvement of the production efficiency of small hydro energy at low flow velocity condition. Blade pressure changes and internal flows were analyzed according to the presence or absence of the hydraulic turbine blade holes at flow velocity of less than 1.0~3.0 m/s. According to the numerical results, the pressure and flow velocity is severly affected by the flow velocity in turbine blade with no holes, while the influence of flow velocity is comparatively decreased in turbine blade with holes. It is also found that the pressure and flow velocity on the blade surface with holes are evenly distributed with no singular location and it is believed that forming a hole in the blade may be helpful in terms of structural safety.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.675-680
• /
• 2017

Considering that most sewage treatment facilities have a water head of less than 2.0 m and a constant flow rate, the development of a small hydro power generation device capable of maintaining stable power generation and efficiency is urgently needed. In this study, a numerical analysis using the CFD code was carried out to develop a drag force type vertical axis hydro turbine for the improvement of the production efficiency of small-scale hydro energy underlow flow velocity conditions. The blade pressure changes and internal flows were analyzed in the presence or absence of hydro turbine blade holes at a flow velocity of less than 2.0 m/s. The pressure distribution of the hydro turbine blades with holes was found to be about 5.1 % lower than that of the hydro turbine blades without holes. The analysis of the internal flow around the water tank and hydro turbine blade revealed that the flow velocity varied with the vector distribution and that the flow velocity of the hydro turbine blades with holes was 5.6 % less than that of the hydro turbine blades without holes. It is believed that forming a hole in the blade may be helpful for its structural safety.