• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.1
• /
• pp.485-492
• /
• 2013

The effect on collection efficiency with 2-stage vortex finder diameter and back mixing of solid flow due to swirling intensity, turbulence eddies, wall bouncing using the residence time distribution of particle flow in a common and modified cyclone. Higher collection efficiencies of fly ash in a modified cyclone(S = 13, 15cm) are showed than common cyclone. Collection efficiency in modified cyclone was highest at 2-stage vortex finder diameter, S = 13 cm. Variances of residence time distribution and average residence times of glass bead were increased with a diameter(S) of 2-stage vortex finder due to swirling intensity and turbulence eddies. Back mixing of solid flow in a modified cyclone were increased with a gas inlet velocity and showed higher than a common cyclone.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.1
• /
• pp.77-82
• /
• 2013

A cyclone separator has been widely used in various industrial processes for removing fine particulate matter because it is easy to fabricate, cost effective, and adaptable to extremely harsh conditions. However, owing to the complex flow field in cyclones, a complete understanding of the detailed mechanisms of particulate removal has not yet been gained. In this study, a theoretical analysis was performed for calculating the collection efficiency and cut-off size in cyclones by taking into account the effects of geometrical and flow parameters. The collection efficiency and cut-off size values predicted by the theoretical model showed good agreement with experimental measurements for particles with a diameter of $0.5-30{\mu}m$. It was also revealed that the surface friction, along with the flow and geometrical parameters, has a significant effect on the cyclone performance.

• Journal of Korean Society of Forest Science
• /
• v.86 no.2
• /
• pp.177-185
• /
• 1997

The influences of fertilizer treatment and clones of five willows and one hybrid poplar on above ground and soil carbon (C) accumulations in a willow bioenergy plantation were studied. The aboveground and soil samples were collected in the winter of 1992 and 1993 from the previously established willow plantation at Tully, New York, U.S.A. in 1987. Half of the plots were fertilized annually with 336kg/ha N, 112kg/ha P, and 224kg/ha K. All trees were harvested annually. The most productive clone, willow clone SV1 with fertilization, accumulated 5.4 and 6.8 t/ha/yr aboveground C contents during the sixth(1992) and seventh(1993) growing seasons, respectively. The average percentage of C in bolewood, bolebark, and branches for the five willow clones and one hybrid poplar clone ranged from 51.1 to 57.5, from 54.0 to 55.4, and from 55.6 to 56.5, respectively, among all treatment combinations. Only tyro of the six clones(SA22 and SA2) responded significantly to the addition of fertilizer by increasing the amount of aboveground C accumulated for the 1992 sampling period(clone-by-fertilizer interaction). No fertilization effect, on aboveground C content, was noted for the 1993 sampling period. No significant fertilization effect on soil C accumulation for all soil sampling depths(0-10, 10-20, and 20-40cm) was found in 1992 and 1993 sampling years. Little clone effect on soil C content was found in 1992 and 1993 sampling years, except at 0-10cm soil depth in 1992. The significant clonal effect on soil C content at 0-10cm soil depth could be because of stone content variation rather than clonal effect. The significant clone-by-fertilizer treatment interaction observed requires that evaluation of response to fertilization by willows be made for each clone individually.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.11 no.2 s.23
• /
• pp.109-115
• /
• 2005

Hydrocyclone has been widely used for the solid-liquid separation in many industrial sites because of its comparatively preferable applications that can be applied to wide-range particle sizes. If seawater with impurities flows through pumps or heat exchanger, it might cause an decrease in the efficiency of cooling system In this paper, we have suggested some methods of separating impurities from seawater in the cooling system by using a Hydrocyclone. The effects of design factors as solid concentration, cyclone inlet pressure, flow rate and diameter of underflow on the separating performance of the Hydrocyclone were investigated The results from this study are summarized as follows: 1) In proportion to the decrease of solid concentration, the efficiency of solid-liquid separation is improved. 2) According as the cyclone inlet pressure increases the efficiency of separation is improved. Conclusively, this research suggested that the Hydrocyclone will be used as a pre-treatment system of cooling water in machines, and eventually prevent unexpected accidents in engine systems.

• Proceedings of KOSOMES biannual meeting
• /
• 2004.11a
• /
• pp.109-115
• /
• 2004

Hydrocyclone has been widely used for the solid-liquid separation in many industrial sites because of its comparatively preferable applications that can be applied to wide-range particle sizes. If seawater with impurities flows through pumps or heat exchanger, it might cause an decrease in efficiency of cooling system. In this paper, we have suggested some methods of separating impurities from seawater in the cooling system by using a Hydrocyclone. The effects of design factors as solid concentration, cyclone inlet pressure, flow rate and diameter of underflow on the separating performance of the Hydrocyclone were investigated The results from this study are summarized as follows: 1) In proportion to the decrease of solid concentration, the efficiency of solid-liquid separation is improved 2) According as the cyclone inlet pressure increases the efficiency of separation is improved Conclusively, this research suggested that the Hydrocyclone will be used as a pre-treatment system of cooling water in machines, and eventually prevent unexpected accidents in engine systems.

• Korean Journal of Breeding Science
• /
• v.40 no.3
• /
• pp.263-268
• /
• 2008

Estimates of genetic gain (in volume growth) and diversity (expressed as status number, $N_s$) were determined in a clonal seed orchard of Pinus koraiensis. The genetic thinning was based on clonal breeding values (represented by general combining ability) obtained from progeny tests, clonal fertility estimated by strobilus production, and clonal size variation determined by the ramet numbers per clone. Parental GCA values for volume growth were calculated, based on height and diameter at breast height measured from field trials. Clonal fertility was estimated from the assessments of strobilus production over twelve years from 1991 to 2003, and used for the calculation of status number. There are 179 clones and 5,268 ramets in 12ha area of P. koraiensis clonal seed orchard. Genetic gain and diversity estimates were determined under assumptions of 30% pollen contamination and inferior genetic value of contaminating pollen. Genetic gain increased as thinning rates were set from 10% to 60%. However, for the higher thinning intensities, the increase of genetic gain was not remarkable. Genetic thinning by means of truncation selection resulted in a greater genetic gain but a large decrease in status number. Status number was represented around 40 clones for 10% through 60% thinning intensities, but for the higher thinning intensities, it was a bit fluctuated. Based on the present results, it could be concluded that thinning rate should not be stronger than 60% to optimize genetic gain while conserving genetic diversity. Consequently 50% or 60% thinning rate might be appropriate for genetic thinning in the clonal seed orchard of P. koraiensis. The effect of pollen contamination on the genetic gain and the consequence of genetic thinning for seed production in the clonal seed orchard, and seed orchard management scheme were also discussed.

• Journal of Life Science
• /
• v.6 no.4
• /
• pp.264-269
• /
• 1996

Monoclonal antibodies against the zoospores of Allomyces macrogynus were prepared using standard hybridoma technique. Mice were immunized either with the fixed zoospores or the zoospore proteins, and the production of the antibodies from the resulting hybridomas were screened by enzyme-linked immunosorbent assay (ELISA). Thirty hybridomas were initially identified ans six hybridomas were purified to the single cell clones. Culture supernatants from the hybridomas were tested for the effects on the growth of the germ tubes, and some of the hybridoma culture supernatants studied showed growth stimulatory effects.

• Journal of Software Assessment and Valuation
• /
• v.15 no.1
• /
• pp.43-53
• /
• 2019

BigCloneBench has recently been used for performance evaluation of code clone detection tool using machine learning. However, since BigCloneBench is not a benchmark that is optimized for machine learning, incorrect learning data can be created. In this paper, we have shown through experiments using machine learning that the set of Type-4 clone methods provided by BigCloneBench can additionally be found. Experimental results using Tree-Based Convolutional Neural Network show that our proposed method is effective in improving BigCloneBench's dataset.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2000.11a
• /
• pp.423-424
• /
• 2000

상대적으로 낮은 미세입자(주로 10$\mu$m이하) 제어효율은 기-고 싸이클론의 최대 약점으로 논의되어 왔다. 이전 연구에서 싸이클론의 유출가스에 포함되어 있는 미세분진 입자들을 2차적으로 분리하고 제거할 수 있는 Post Cyclone(PoC)이라는 장치를 개발하여 그 효용성을 입증하였고(Hoffmann,1996), Mita 등(Mita el. al., 1997)이 이론적 뒷받침을 위한 연구를 진행하여 이론적 모델을 제시하였다. 즉, PoC의 효율은 Reynolds 수와 Stokes 수의 함수로 표시될 수 있을 것으로 추정하였다. (중략)

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2002.11a
• /
• pp.83-84
• /
• 2002

사이클론 집진기(이하 "사이클론"으로 표기)는 1800년대 후반에 기본개념이 싹트기 시작한 이후 100년 이상의 역사를 지닌 집진 장치로서, 구성이 단순하고, 고온 및 고압에서도 동작이 가능하며, 에너지 소모가 적고, 제조비용과 유지비용이 저렴한 특징을 지니고 있다. 현재 산업체에 설치되어 있는 싸이클론은 대용량의 가스처리, 입경 10-200$\mu\textrm{m}$까지의 분진처리, 낮은 초기설치비, 유지보수 및 조작의 간편성 때문에 산업체 여러 분야에서의 응용성은 다양하고 응용범위도 상당히 넓다고 할 수 있으며 석탄가스화 복합발전 플랜트, 쓰레기 소각로, 순환유동층 보일러 등에 널리 사용되고 있다. (중략)